Difference between revisions of "T+A Pulsar PD 1200 R"
m (hat „T&A Pulsar PD 1200 R“ nach „T+A Pulsar PD 1200 R“ verschoben) |
|
(No difference)
| |
Latest revision as of 07:29, 24 March 2014
Data[edit]
General
- Manufacturer: T+A
- Model: Pulsar PD 1200 R
- Years of manufacture:
- Manufactured in: Herford / FRG
- Type: Digital preamplifier
- Remote control: Various system remote controls from T+A
- Power consumption ( operation / stand-by ): 30 VA / 2.5 VA
- Dimensions: 440 x 75 x 360 mm (WxHxD).
- Weight:
- Color: various
- New price approx.: 3.500 €
Connections
- Number of inputs:
- analog:
- 4 high level (1 input of which can be optionally upgraded to MM or MC-PHONO input).
- digital:
- 4 digital inputs
- number of outputs:
- 1 record output (digital)
Technical Data
- Digital part
- A/D converter type: Sigma/Delta
- Resolution: 20 Bit
- Sampling rate: 44.1 kHz or 48 kHz
- Frequency response: 2 ... 22,000 Hz
- Signal-to-noise ratio: > 108 dB
- Noise-to-noise ratio: > 110 dB
Distortion factor: < 0.002% ** Record output ( analog )
- Record output ( analog ): 1 V / 100 Ohm
- Record D/A converter: Sigma/Delta, 20 Bit
- Analog output module:
- Digital/Analog converter: 24 Bit / 192 kHz
- Frequency response: 1 ... 22,000 Hz
- Signal to noise ratio: 108 / 115 dB
- Distortion + Intermodulation: 0.0015%
- Channel separation: 100 dB
- Tone control ( digital ): +/- 6 dB at 300 / 3000 Hz
Special Features
- T+A MEP room measurement system to compensate for room influences on the frequency response.