Difference between revisions of "Sony ST-S 390"
Stefan Phan (talk | contribs) |
m (→Technische Daten) |
||
Line 1: | Line 1: | ||
+ | RDS Tuner SONY ST-S390 | ||
− | + | ==Technical data== | |
− | + | *Connections | |
+ | **Power supply cable fixed to it, Euro plug | ||
+ | 2 FM-antenna inputs (very good if you live close to the border or if you want to use the offer of the cable provider besides the house antenna) | ||
+ | **2 special 4 pole sockets for cable remote control | ||
+ | Screw connection for AM antenna | ||
+ | Screw connection for grounding | ||
+ | audio output RCA stereo | ||
+ | **no digital outputs or headphone connection | ||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
+ | control units | ||
+ | **on/off switch turns off the power supply completely | ||
+ | **Rotary wheel, with weight for good tracking, without mechanical resistance | ||
+ | **7x small buttons for: RDS, AF, PTY, ANT, ANT-ATT, IF-Band, Stereo/Mute. | ||
+ | **3x round buttons for: Display, Display-Mode, Character | ||
+ | 13x large buttons for: 10 number field, Memory, Tune Mode, Tuning/Preset, Direct | ||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
+ | display | ||
+ | Field strength display as bar | ||
+ | Brightness of display switchable (light/dark) | ||
+ | **Display of all info/details or only station name (switchable) | ||
+ | **Display "Stereo" in red (everything else normal) | ||
− | |||
− | |||
− | |||
− | |||
− | |||
+ | *Internal values / other | ||
+ | 3-band synthesizer (FM, MW, LW) | ||
+ | Radio Data System (RDS) | ||
+ | **Direct Comparator Technology | ||
+ | **Reception and sound-improving Wave Optimizer technology | ||
+ | 30 station memory (presets, 3 banks of 10 stations each) | ||
+ | IF bandwidth switching (Narrow/Wide) | ||
+ | Switchable antenna attenuator | ||
+ | Hl-Blend | ||
+ | Auto Tuning | ||
+ | **Remote control via Control S-cable (not included) | ||
− | + | ==Technical Details== | |
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
+ | *General | ||
+ | **Power supply 220-230V alternating voltage, 50/60 Hz | ||
+ | **Power consumption 14 W | ||
+ | **Dimensions (WxHxD): 430 x 85 x 295 millimetres | ||
+ | **Weight: approx. 3.0 kg | ||
− | |||
− | * | + | FM tuner |
− | ** | + | **Range 87.5 - 108 MHz |
− | ** | + | Antenna sockets 75 Ohm unbalanced |
− | ** | + | **intermediate frequency 10,7 MHz |
− | ** | + | **Sensitivity at 26dB signal to noise ratio: 10.3 dBf, 0.9µV/75 Ohm (mono) |
+ | **Sensitivity at 46dB signal to noise ratio: 38.5dB, 23µV/75 Ohm (stereo) | ||
+ | **Usable sensitivity 10.3dBf, 0.9µV/75ohm (IHF) | ||
+ | **Signal-to-noise ratio (at 40 kHz deviation) 80 dB (mono) and 76 dB (stereo) | ||
+ | WIDE distortion 0.04% (mono), 0.05% (stereo) | ||
+ | NARROW 0.06% (mono), 0.08% (stereo) | ||
+ | Frequency response 30 Hz - 15 kHz (+0.2dB, -0.5dB) | ||
+ | Channel separation 50 dB at 1 kHz | ||
+ | Separation sharpness (at 400 kHz) Wide 80 kB, Narrow 90 dB | ||
+ | Separation (at 300 kHz) Wide 45 kB, Narrow 70 dB | ||
+ | **Output level (at 40 kHz deviation) 600 mV | ||
+ | *MW/LW tuner | ||
+ | **Reception range MW: 531 - 1,602 kHz (9 kHz grid) | ||
+ | LW reception range: 153 - 279 kHz (1 kHz grid) | ||
+ | Intermediate frequency 450 kHz | ||
+ | **Useable sensitivity (with MW/LW loop antenna) | ||
+ | MW: 300µV/m , LW: 1mV/m | ||
+ | Signal-to-noise ratio 54 dB | ||
+ | Clutter 0.3% | ||
+ | Separation sharpness 32 dB | ||
− | + | [[File:SONY ST-S390.jpg]] | |
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | + | [[Category:Tuner]] | |
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | [[ | ||
− | |||
− |
Latest revision as of 20:47, 30 September 2012
RDS Tuner SONY ST-S390
Technical data[edit]
- Connections
- Power supply cable fixed to it, Euro plug
2 FM-antenna inputs (very good if you live close to the border or if you want to use the offer of the cable provider besides the house antenna)
- 2 special 4 pole sockets for cable remote control
Screw connection for AM antenna Screw connection for grounding audio output RCA stereo
- no digital outputs or headphone connection
control units
- on/off switch turns off the power supply completely
- Rotary wheel, with weight for good tracking, without mechanical resistance
- 7x small buttons for: RDS, AF, PTY, ANT, ANT-ATT, IF-Band, Stereo/Mute.
- 3x round buttons for: Display, Display-Mode, Character
13x large buttons for: 10 number field, Memory, Tune Mode, Tuning/Preset, Direct
display
Field strength display as bar
Brightness of display switchable (light/dark)
- Display of all info/details or only station name (switchable)
- Display "Stereo" in red (everything else normal)
- Internal values / other
3-band synthesizer (FM, MW, LW) Radio Data System (RDS)
- Direct Comparator Technology
- Reception and sound-improving Wave Optimizer technology
30 station memory (presets, 3 banks of 10 stations each) IF bandwidth switching (Narrow/Wide) Switchable antenna attenuator Hl-Blend Auto Tuning
- Remote control via Control S-cable (not included)
Technical Details[edit]
- General
- Power supply 220-230V alternating voltage, 50/60 Hz
- Power consumption 14 W
- Dimensions (WxHxD): 430 x 85 x 295 millimetres
- Weight: approx. 3.0 kg
FM tuner
- Range 87.5 - 108 MHz
Antenna sockets 75 Ohm unbalanced
- intermediate frequency 10,7 MHz
- Sensitivity at 26dB signal to noise ratio: 10.3 dBf, 0.9µV/75 Ohm (mono)
- Sensitivity at 46dB signal to noise ratio: 38.5dB, 23µV/75 Ohm (stereo)
- Usable sensitivity 10.3dBf, 0.9µV/75ohm (IHF)
- Signal-to-noise ratio (at 40 kHz deviation) 80 dB (mono) and 76 dB (stereo)
WIDE distortion 0.04% (mono), 0.05% (stereo) NARROW 0.06% (mono), 0.08% (stereo) Frequency response 30 Hz - 15 kHz (+0.2dB, -0.5dB) Channel separation 50 dB at 1 kHz Separation sharpness (at 400 kHz) Wide 80 kB, Narrow 90 dB Separation (at 300 kHz) Wide 45 kB, Narrow 70 dB
- Output level (at 40 kHz deviation) 600 mV
- MW/LW tuner
- Reception range MW: 531 - 1,602 kHz (9 kHz grid)
LW reception range: 153 - 279 kHz (1 kHz grid) Intermediate frequency 450 kHz
- Useable sensitivity (with MW/LW loop antenna)
MW: 300µV/m , LW: 1mV/m Signal-to-noise ratio 54 dB Clutter 0.3% Separation sharpness 32 dB