Difference between revisions of "Realistic STA-90"
Steve Canuck (talk | contribs) (→Data) |
Steve Canuck (talk | contribs) (→Data) |
||
Line 33: | Line 33: | ||
'''Technical data''' | '''Technical data''' | ||
AMPLIFIER | AMPLIFIER | ||
− | *Audio Output Power at no more than 0.3% Harmonic | + | *Audio Output Power at no more than 0.3% Harmonic Distortion into 8 ohms, over the audio spectrum, 20—20,000 Hz (Minimum RMS power, both channels driven) |
− | Hz (Minimum RMS power, both channels driven) | ||
*45 watts per channel | *45 watts per channel | ||
− | *20—20,000 Hz + 1 dB | + | *Frequency Response 20—20,000 Hz + 1 dB |
− | Less than 1% (typically 0.2%) | + | *Signal-to-Noise Ratio 60 dB (Phono), 75 dB (Aux) |
− | + | *IM Distortion Less than 1% (typically 0.2%) | |
− | + | *Input Sensitivity (for max power) 3 mV (Phono), 250 mV (Aux and Tape) | |
− | 3 mV (Phono) | + | |
− | 250 mV (Aux and Tape) | + | FM TUNER |
− | + | *Sensitivity Better than 2.0 uV (IHF) | |
− | + | *Signal-to-Noise Ratio 65 dB | |
− | + | *Capture Ratio 2 dB | |
− | + | *Total Harmonic Distortion Mono 0.6%, Stereo 0.8% | |
− | FM TUNER | + | *Image Rejection -50 dB |
− | Sensitivity Better than 2.0 uV (IHF) | + | *Selectivity 60 dB |
+ | *Separation at 1000 Hz 35 dB | ||
− | + | AM TUNER | |
− | + | Sensitivity 250 uV/m (for 20 dB S+N/N) | |
+ | Antenna Terminal Sensitivity 25 uV | ||
+ | Image Rejection 35 dB | ||
== Remarks == | == Remarks == |
Revision as of 17:29, 19 August 2024
Brief description
Your new STA-90 is a highly versatile AM/FM Stereo Receiver which delivers enough power to drive almost any speaker system. The “honest” 45 watts per channel over the entire audio bandwidth will drive both “main’ and ‘remote’’ speakers. And it has the performance and convenience features that distinguish a truly great receiver. Built-in Quatravox® synthesizes 4-channel sound from ordinary stereo sources. Whenever you’re ready, just add a second set of stereo speakers for the rear channels. It's the best of both worlds—stereo and 4-channel. At Radio Shack we also believe a receiver should look as good as it sounds. So we built the STA-90 with a blackout dial and a dial pointer that changes from yellow to red to indicate stereo broadcasts. Like every Realistic component, the STA-90 comes with a beautiful oiled walnut case—and it doesn’t cost you a penny extra.
Data
General
- Manufacturer:Realistic (Foster Electric)
- Model:STA-90
- Year of manufacture:1976-1978
- Manufactured in:Japan
- Color:Silver Face, Real Walnut case
- Dimensions (19.25"W/6"H/13.25"D):
- Weight: X kg
- New price approx:$359.95
- Aux, Phono, Tape Monitor 1 & 2
Technical data AMPLIFIER
- Audio Output Power at no more than 0.3% Harmonic Distortion into 8 ohms, over the audio spectrum, 20—20,000 Hz (Minimum RMS power, both channels driven)
- 45 watts per channel
- Frequency Response 20—20,000 Hz + 1 dB
- Signal-to-Noise Ratio 60 dB (Phono), 75 dB (Aux)
- IM Distortion Less than 1% (typically 0.2%)
- Input Sensitivity (for max power) 3 mV (Phono), 250 mV (Aux and Tape)
FM TUNER
- Sensitivity Better than 2.0 uV (IHF)
- Signal-to-Noise Ratio 65 dB
- Capture Ratio 2 dB
- Total Harmonic Distortion Mono 0.6%, Stereo 0.8%
- Image Rejection -50 dB
- Selectivity 60 dB
- Separation at 1000 Hz 35 dB
AM TUNER Sensitivity 250 uV/m (for 20 dB S+N/N) Antenna Terminal Sensitivity 25 uV Image Rejection 35 dB
Remarks
Other models of the same series:
Test reports
Links