Difference between revisions of "Elac EMM-170"
m (Nur Formatiierung.) |
(→Bemerkungen) |
||
| Line 1: | Line 1: | ||
__NOTOC__ | __NOTOC__ | ||
| − | == | + | == Data == |
| − | {{ | + | {{navigation}} |
| − | ''' | + | '''General''' |
| − | * | + | * Manufacturer: Elac |
| − | * | + | * Model: EMM 170 |
| − | * | + | * Years of manufacture: |
| − | * | + | * Made in: |
| − | * | + | * Colour: |
| − | * | + | * Weight: 6.5g |
| − | * | + | * Original price approx: |
| − | ''' | + | '''Technical data''' |
| − | * | + | * Principle: |
| − | * | + | * Frequency response: 10 - 23000 Hz |
| − | * | + | * Channel separation: 26/20 dB (at 1kHz/10 kHz) |
| − | * | + | * Channel balance: |
| − | * | + | * Crosstalk attenuation: |
| − | * | + | * Output voltage: |
| − | * | + | * Terminating resistor: 47 KOhm |
| − | * | + | * Inductance: 450 mH |
| − | * | + | * Needle type: |
| − | * | + | * Recommended contact force: 10.0 - 12.5 mN |
| − | * | + | * Needle compliance: |
| − | ''' | + | '''Special Features''' |
| − | * | + | * here, if available |
| − | == | + | == Remarks == |
| − | + | Scanning needle: 170 HA 30<br> | |
| − | + | needle carrier: aluminium tube<br> | |
| − | + | Diamond shape: v.d. Hul-II<br> | |
| − | + | Rounding radius: 5/75 micrometer (mym)<br> | |
| − | + | Static compliance: 30mym/mN<br> | |
| − | + | Depth scanning capability at 315 Hz: 70 - 80 mym<br> | |
| − | + | Transfer factor at 1kHz and 5.6cm/s: 5.6 mV<br> | |
| − | + | Level difference at 1 kHz: < 1.0 dB<br> | |
| − | + | Moving mass: 0.5 mg<br> | |
| − | + | Vertical track angle: 20<br> | |
| − | + | Recommended cable capacitance: 300 pF<br> | |
| − | + | Use in tonearm with mass: > 6 - 12 g | |
| − | == | + | == Pictures == |
| − | == | + | == Reports == |
== Links == | == Links == | ||
| − | [[ | + | [[Category:Pickups]]</br></br></br></br></br></br></br></br></br></br></br> |
Latest revision as of 08:37, 22 August 2008
Data[edit]
General
- Manufacturer: Elac
- Model: EMM 170
- Years of manufacture:
- Made in:
- Colour:
- Weight: 6.5g
- Original price approx:
Technical data
- Principle:
- Frequency response: 10 - 23000 Hz
- Channel separation: 26/20 dB (at 1kHz/10 kHz)
- Channel balance:
- Crosstalk attenuation:
- Output voltage:
- Terminating resistor: 47 KOhm
- Inductance: 450 mH
- Needle type:
- Recommended contact force: 10.0 - 12.5 mN
- Needle compliance:
Special Features
- here, if available
Remarks[edit]
Scanning needle: 170 HA 30
needle carrier: aluminium tube
Diamond shape: v.d. Hul-II
Rounding radius: 5/75 micrometer (mym)
Static compliance: 30mym/mN
Depth scanning capability at 315 Hz: 70 - 80 mym
Transfer factor at 1kHz and 5.6cm/s: 5.6 mV
Level difference at 1 kHz: < 1.0 dB
Moving mass: 0.5 mg
Vertical track angle: 20
Recommended cable capacitance: 300 pF
Use in tonearm with mass: > 6 - 12 g
Pictures[edit]
Reports[edit]
Links[edit]