Difference between revisions of "Category:Speaker drivers"

(Transducer lab)
 
 
Line 1: Line 1:
Power rating (nominal/music): 150/240 W
 
Impedance: 2 x 8 Ohm
 
Resonance frequency (fs): 25 Hz
 
Direct current resistance (Re): 2 x 6 Ohm
 
Rated sound pressure: 91 dB (1 W/1 m)
 
air gap height: 6 mm
 
voice coil (D; length): 39 mm; 14 mm
 
force factor (F/I): 10.9 N/A
 
voice coil inductance: 2 x 1.50 mH
 
  
Effective diaphragm area: 346 qcm
 
Moving mass including air load: 38.5 g
 
Equivalent volume (Vas): 174 l
 
Suspension compliance: 1.04 x 10-3m/N
 
Mechanical quality (Qms): 3.60
 
Electrical quality (Qes): 0,44
 
Open air total quality (Qts): 0,39
 
Remarks
 
bass driver with double voice coil
 
basket made of low resonance magnesium casting
 
long excursion rubber surround
 
 
Application: In multi-way combinations or as mono subwoofer with satellites of medium efficiency.
 
Application: In multi-way combinations or as mono subwoofer with satellites of medium efficiency.
 
Other models in the same series:
 
Other models in the same series:

Latest revision as of 17:39, 2 December 2023

Application: In multi-way combinations or as mono subwoofer with satellites of medium efficiency. Other models in the same series:

Pages in category "Speaker drivers"

The following 2 pages are in this category, out of 2 total.