Difference between revisions of "Rega RB 250"
Analoghatwas (talk | contribs) (hw-Link Rega.) |
Analoghatwas (talk | contribs) (Kat. hinzu.) |
||
| Line 1: | Line 1: | ||
| − | + | Tonearm Rega RB 250 | |
| − | + | Manufacturer: [[Rega]] | |
| − | + | Model: RB 250 | |
| − | + | Years of manufacture: | |
| − | + | Made in: England ? | |
| − | + | Colour: black | |
| − | + | New price approx.: 250,00 Euro | |
| − | + | Technical data | |
| − | + | Material: aluminium, steel + plastic | |
| − | + | Total length: 313 mm | |
| − | + | Length pivot point - tip: 237 mm 9 inch | |
| − | + | Offset angle : 21 º | |
| − | + | Pickup overhang : 15 mm | |
| − | + | Counterweight overhang: | |
| − | + | permissible pickup weights: 4 - 10 g | |
| − | + | inertial mass of the arm: 5,5 g | |
| − | + | Support weight adjustment range: | |
| − | + | Height adjustment range: | |
| − | + | Cable capacity: 220 pF | |
| − | + | One of the most used tonearms in the world, easy to handle and grateful tuning object. | |
| − | + | Especially the steel counterweight on a plastic axle with spiral thread used here should be exchanged for a metal axle made of aluminium, brass or stainless steel. | |
| − | + | metal axle made of aluminium, brass or stainless steel. The tonearm is optically no feast for the eyes | |
| − | + | but ingeniously simply constructed and extremely stable and very good and is used on many high-end drives, | |
| − | ( | + | (which cost the multiple of the arm) only so that an arm is at all on it! The arm lies down |
| − | + | correctly adjusted but with much more expensive ! Worthy of replacement is also the tonearm RCA cable and | |
| − | + | and for advanced users also the internal wiring. These modifications are also offered professionally, | |
| − | + | but cost more than the arm ... | |
| − | == | + | == Pictures == |
| − | [[ | + | [[File:Rega RB 250.jpg]] |
| + | |||
| + | [[Category:Tonearms]] | ||
Latest revision as of 14:41, 12 April 2020
Tonearm Rega RB 250
Manufacturer: Rega Model: RB 250 Years of manufacture: Made in: England ? Colour: black New price approx.: 250,00 Euro
Technical data
Material: aluminium, steel + plastic Total length: 313 mm Length pivot point - tip: 237 mm 9 inch Offset angle : 21 º Pickup overhang : 15 mm Counterweight overhang: permissible pickup weights: 4 - 10 g inertial mass of the arm: 5,5 g Support weight adjustment range: Height adjustment range: Cable capacity: 220 pF
One of the most used tonearms in the world, easy to handle and grateful tuning object. Especially the steel counterweight on a plastic axle with spiral thread used here should be exchanged for a metal axle made of aluminium, brass or stainless steel. metal axle made of aluminium, brass or stainless steel. The tonearm is optically no feast for the eyes but ingeniously simply constructed and extremely stable and very good and is used on many high-end drives, (which cost the multiple of the arm) only so that an arm is at all on it! The arm lies down correctly adjusted but with much more expensive ! Worthy of replacement is also the tonearm RCA cable and and for advanced users also the internal wiring. These modifications are also offered professionally, but cost more than the arm ...
Pictures[edit]
