Difference between revisions of "Denon PMA-900 V"
| Line 1: | Line 1: | ||
__NOTOC__ | __NOTOC__ | ||
| − | == | + | == Data == |
| − | {{ | + | {{navigation}} |
| − | ''' | + | '''General''' |
| − | * | + | * Manufacturer: [[Denon]] |
| − | * | + | * Model: PMA-900V |
| − | * | + | * Type: Integrated amplifier |
| − | * | + | * Years of manufacture: 1986 -1987 |
| − | * | + | * Made in: Japan |
| − | * | + | * Color: Champagne or Black |
| − | * | + | * Remote control: - |
| − | * | + | * Power consumption: 220 watts |
| − | * | + | * Dimensions: W x H x D: 434 x 157 x 397 mm |
| − | * | + | * Weight: 11.6 kg |
| − | * | + | * Original price approx.: 1'400 DM |
| − | * | + | * Connections: |
** Phono | ** Phono | ||
| − | + | CD | |
** Tuner | ** Tuner | ||
** Video/Aux | ** Video/Aux | ||
** Tape 1 In/Out | ** Tape 1 In/Out | ||
** Tape 2 In/Out | ** Tape 2 In/Out | ||
| − | + | DAT | |
** Processor Loop In/Out | ** Processor Loop In/Out | ||
| − | * | + | * Number of Analog Outputs: |
| − | ** Tape Rec 1, 2: | + | ** Tape Rec 1, 2: |
| − | ** DAT: | + | ** DAT: |
| − | ** Pre out: | + | ** Pre out: |
| − | ** | + | ** Headphones: |
| − | ** 2 | + | ** 2 pairs of speakers |
| − | |||
| − | |||
| − | ''' | + | '''Technical Data''' |
| − | * | + | * Continuous power (at distortion factor) |
| − | ** 8 Ohm: 2x | + | ** 8 Ohm: 2x 120 W (20 Hz - 20'000 Hz) |
| − | ** 4 Ohm: 2x | + | ** 4 Ohm: 2x 200 W (1 kHz, DIN) |
| − | * | + | * Dynamic power |
| − | ** 8 Ohm: 2x | + | ** 8 Ohm: 2x 160 W |
| − | ** 4 Ohm: 2x | + | ** 4 Ohm: 2x 240 W |
| − | ** | + | ** 2 Ohm: 2x 280 W |
| − | * | + | * Distortion factor: 0.003 % at 20 Hz - 20 kHz |
| − | + | * Frequency response: 5 Hz - 150 kHz | |
| − | * | + | * Signal-to-noise ratio: 107 dB |
| − | * | + | * Adjacent channel separation: 78 dB |
| − | * | + | * Intermodulation Distortion: 0.003 % |
| − | * | ||
| − | ''' | + | '''Special Features''' |
| + | ** Discrete and balanced design with high quality components. | ||
| + | ** 8 final transistors with 130 Watt power each provide sufficient power security and high damping factor | ||
| + | ** 24 000 µF electrolytic capacitor package for high dynamic and impulse performance | ||
| + | ** Elaborate tone control, loudness, CD direct and complete circuit suppression of the tone control in the middle position of the controls, thus extreme reduction of phase distortion | ||
| + | ** Extremely short signal paths for small intermodulation distortions | ||
| + | ** Magnetically shielded, large toroidal transformer | ||
| + | 2 pairs of loudspeakers can be connected and switched separately | ||
| + | ** Elaborate electronic power and overload protection within milliseconds | ||
| + | ** Short-term 2 Ohm stable | ||
| + | ** 3 video signals can be switched with the input selection with | ||
| + | ** Front AV input | ||
| + | ** Large Lp connectors | ||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | == | + | == Remarks == |
| − | * | + | * Other models in the same series: |
* [[Denon PMA-300 V]] | * [[Denon PMA-300 V]] | ||
* [[Denon PMA-500 V]] | * [[Denon PMA-500 V]] | ||
| Line 74: | Line 71: | ||
| − | == | + | == Pictures == |
| + | * Image: Denon PMA-900 V | ||
| + | [[File:PMA900V.jpg]] | ||
| − | |||
| − | + | * Picture: Denon PMA-900 V | |
| + | [[File:PMA900V.jpg]] | ||
| − | == | + | == Reviews == |
== Links == | == Links == | ||
| − | [[ | + | [[Category:Integrated amplifier]] |
Latest revision as of 14:44, 28 May 2018
Data[edit]
General
- Manufacturer: Denon
- Model: PMA-900V
- Type: Integrated amplifier
- Years of manufacture: 1986 -1987
- Made in: Japan
- Color: Champagne or Black
- Remote control: -
- Power consumption: 220 watts
- Dimensions: W x H x D: 434 x 157 x 397 mm
- Weight: 11.6 kg
- Original price approx.: 1'400 DM
- Connections:
- Phono
CD
- Tuner
- Video/Aux
- Tape 1 In/Out
- Tape 2 In/Out
DAT
- Processor Loop In/Out
- Number of Analog Outputs:
- Tape Rec 1, 2:
- DAT:
- Pre out:
- Headphones:
- 2 pairs of speakers
Technical Data
- Continuous power (at distortion factor)
- 8 Ohm: 2x 120 W (20 Hz - 20'000 Hz)
- 4 Ohm: 2x 200 W (1 kHz, DIN)
- Dynamic power
- 8 Ohm: 2x 160 W
- 4 Ohm: 2x 240 W
- 2 Ohm: 2x 280 W
- Distortion factor: 0.003 % at 20 Hz - 20 kHz
- Frequency response: 5 Hz - 150 kHz
- Signal-to-noise ratio: 107 dB
- Adjacent channel separation: 78 dB
- Intermodulation Distortion: 0.003 %
Special Features
- Discrete and balanced design with high quality components.
- 8 final transistors with 130 Watt power each provide sufficient power security and high damping factor
- 24 000 µF electrolytic capacitor package for high dynamic and impulse performance
- Elaborate tone control, loudness, CD direct and complete circuit suppression of the tone control in the middle position of the controls, thus extreme reduction of phase distortion
- Extremely short signal paths for small intermodulation distortions
- Magnetically shielded, large toroidal transformer
2 pairs of loudspeakers can be connected and switched separately
- Elaborate electronic power and overload protection within milliseconds
- Short-term 2 Ohm stable
- 3 video signals can be switched with the input selection with
- Front AV input
- Large Lp connectors
Remarks[edit]
- Other models in the same series:
- Denon PMA-300 V
- Denon PMA-500 V
- Denon PMA-700 V
- Denon PMA-900 V
Pictures[edit]
- Image: Denon PMA-900 V
- Picture: Denon PMA-900 V