Difference between revisions of "Sennheiser E602-II"
Line 1: | Line 1: | ||
− | ''' | + | '''General''' |
− | * | + | *Manufacturer: [[Sennheiser]] |
− | * | + | *Model: e602-II |
− | * | + | *Years of manufacture: around 2005 |
− | * | + | *Made in: Germany |
− | * | + | *Weight: 320 g |
*UVP (€): | *UVP (€): | ||
− | ''' | + | '''Technical Data''' |
− | * | + | *Directional characteristic: cardioid |
− | * | + | *Free-field open-circuit transmission factor: 0.9 mV/Pa |
− | * | + | *Impedance: 350 Ohm |
− | *Min. | + | *Min. connected load: 1000 Ohm |
− | * | + | *Frequency range: 20 - 16,000 Hz |
− | * | + | *Dimensions: 60 x 153 mm |
− | ''' | + | '''Special''' |
− | * | + | *especially suitable for low frequency sources |
− | * | + | *extended bass range |
− | * | + | *hum compensation coil |
+ | [[Category:Microphones]] |
Latest revision as of 09:38, 28 January 2010
General
- Manufacturer: Sennheiser
- Model: e602-II
- Years of manufacture: around 2005
- Made in: Germany
- Weight: 320 g
- UVP (€):
Technical Data
- Directional characteristic: cardioid
- Free-field open-circuit transmission factor: 0.9 mV/Pa
- Impedance: 350 Ohm
- Min. connected load: 1000 Ohm
- Frequency range: 20 - 16,000 Hz
- Dimensions: 60 x 153 mm
Special
- especially suitable for low frequency sources
- extended bass range
- hum compensation coil