Difference between revisions of "Technics SL-QD3"

(Aus der orginal Bedienungsanleitung)
 
m
 
(One intermediate revision by the same user not shown)
Line 1: Line 1:
−
Technics – QD3 Plattenspieler
+
__NOTOC__
−
Technische Daten:
+
== Data ==
−
Allgemeine Daten:
+
{{navigation}}
−
Stromversorgung 220V, 50Hz
+
'''General'''
−
Leistungsaufnahme: 6W
+
* Manufacturer: [[Technics]]
−
Abmessungen: max. Höhe bei geöffnetem Oberteil(Abdeckhaube)
+
* Model: SL-QD3
−
43X37x41cm
+
* Years of manufacture:
−
Gewicht:         4,6kg
+
* Made in:
 +
* Color:
 +
* Power consumption: 6W
 +
* Dimensions: 43 x 37 x 41 cm (max. height with top/cover open);
 +
* Weight: 4.6 kg;
 +
* Original price approx:
  
−
Plattenspieler:
+
'''Connections'''
−
Typ: Automatischer Plattenspieler mit Quarz – Direktantrieb
+
* Outputs:
−
                                Startautomatik, Rückführautomatik, Wiederholung,
+
* Inputs:
−
                                Manueller Betrieb.
 
−
Antrieb:         Direktantrieb
 
−
Motor:                 Kollektorloser Gleichstrommotor
 
−
Antriebsregelmethode: Quartz – Steuerung QPL
 
−
Plattenteller:         Alluminium – Spritzguß    Durchmesser 31,2cm
 
−
Plattentellerdrehzahl: 33-1/3 und 45 U. / min.
 
−
Glichlaufschwankungen: 0,012% WRMS*
 
−
                0,025% WRMS(JIS C5521)
 
−
                                ±0,035% Spitze
 
−
Diese Nennleistung bezieht sich auf den Laufwerkteil allein ausschließlich Einflüsse von Schallplatte, Tonabnehmer oder Tonarm, aber einschließlich Plattenteller. Gemessen anhand von Signalen vom eingebauten Frequenzgenerator des Motorteils.
 
  
−
Rumpeln:         -56dB (IEC 98A unbewertet)
+
'''Technical data'''
−
                                -78dB (IEC 98A bewertet)
+
* Drive: Direct drive with quartz - control QPL;
−
Tonarm:
+
* Motor: commutatorless DC motor;
−
Typ:         Statisch balancierter, gerader Tonarm, Tonabnehmersystem
+
* Speed: 33-1/3 and 45 rpm.
−
        Vom Einsteck – Typ
+
* Synchronous fluctuations: 0.012% WRMS*, 0.025% WRMS (JIS C5521) ±0.035% peak
−
Effektive Länge: 230mm
+
* Rumble noise ratio: -56dB (IEC 98A unrated), -78dB (IEC 98A rated)
−
Überhang: 15mm
+
* Turntable: aluminium - injection moulding, diameter 31.2 cm;
−
Spurfehlwinkel: 2°32`bei der Einlaufrille einer 30cm Platte
+
* Operation mode: automatic start, automatic return, repeat, manual operation.
−
Effektive Masse: 13,5g (einschließlich Tonabnehmer)
+
* Pitch:  
−
Auflagekraft-
+
* Tonearm: Statically balanced, straight tonearm,
−
Einstellbereich: 1,25±0,25 g
+
** Adjustment range: 1.25±0.25g
−
Zulässiges
+
** Effective length: 230mm
−
Tonabnehmergewicht: 6g
+
Overhang: 15mm
−
Tonabnehmer
+
Tracking error angle: 2°32`at the groove of a 30cm record
−
Typ:         Beweglicher Magnet-Stereo-Tonabnehmer
+
** Effective mass: 13.5g (including pickup);
−
Magnetkreis: Ganzlamellenkern
+
** Pickup weight: 6g allowed.
−
Frequenzgang: 10 Hz bis 40 kHz
+
* Cartridge: Cartridge system of the plug-in type.
−
Ausgangsspannung: 2,5mV bei 1 kHz 5cm/s. Null zu Spitze, lateral [7 mV bei 1 kHz  
+
** Type: moving magnetic stereo cartridge.
−
        10 cm/s. Null zu Spitze, 45° (DIN 45 500)]
+
*** Magnetic circuit: Full lamella core;
−
Kanaltrennung: Mehr als 22 dB bei 1 kHz
+
*** Frequency response: 10 Hz to 40 kHz
−
Kanalabweichung: Innerhalb 1,8 dB bei 1kHz
+
*** Output voltage: 2.5 mV at 1 kHz 5cm/s. Zero to peak, lateral<br />
−
Empfohlene Endimpedanz: 47kΩ~100kΩ
+
[7 mV at 1 kHz 10 cm/s. zero to peak, 45° (DIN 45 500)]
−
Nenngiebigkeit(dynamisch): 12X10¯⁶cm/dyn bei 100Hz
+
*** Channel separation: More than 22 dB at 1 kHz
−
Nadeldruck Bereich: 1,25±0,25 g (12,5±2,5mN
+
*** Channel deviation: Within 1.8 dB at 1 kHz
−
Gewicht: 6 g ( nur Tonabnehmer)
+
*** Recommended final impedance: 47kΩ~100kΩ.
−
Ersatznadel: EPS-30ES
+
*** Nominal dynamic range: 12X10¯⁶cm/dyn at 100Hz
−
Änderungen der technischen Daten vorbehalten. Die angegebenen Gewichts- und Abmessungsdaten sind ungefähre Werte.
+
*** Needle pressure range: 1.25±0.25 g (12.5±2.5mN
 +
*** Weight: 6 g ( pickup only)
 +
*** Replacement needle: EPS-30ES.
 +
 
 +
'''Special Features'''
 +
* here, if available
 +
 
 +
== Remarks ==
 +
This rating refers to the drive section alone excluding influences from record, cartridge or tonearm, but including turntable. Measured using signals from the motor section's built-in frequency generator.
 +
* Other models in the same series:
 +
 
 +
== Pictures ==
 +
 
 +
== Reports ==
 +
 
 +
== Links ==
 +
<br />
 +
<br />
 +
 
 +
[[Category:Turntables]]

Latest revision as of 13:09, 22 October 2015

Data[edit]

General

  • Manufacturer: Technics
  • Model: SL-QD3
  • Years of manufacture:
  • Made in:
  • Color:
  • Power consumption: 6W
  • Dimensions: 43 x 37 x 41 cm (max. height with top/cover open);
  • Weight: 4.6 kg;
  • Original price approx:

Connections

  • Outputs:
  • Inputs:

Technical data

  • Drive: Direct drive with quartz - control QPL;
  • Motor: commutatorless DC motor;
  • Speed: 33-1/3 and 45 rpm.
  • Synchronous fluctuations: 0.012% WRMS*, 0.025% WRMS (JIS C5521) ±0.035% peak
  • Rumble noise ratio: -56dB (IEC 98A unrated), -78dB (IEC 98A rated)
  • Turntable: aluminium - injection moulding, diameter 31.2 cm;
  • Operation mode: automatic start, automatic return, repeat, manual operation.
  • Pitch:
  • Tonearm: Statically balanced, straight tonearm,
    • Adjustment range: 1.25±0.25g
    • Effective length: 230mm

Overhang: 15mm Tracking error angle: 2°32`at the groove of a 30cm record

    • Effective mass: 13.5g (including pickup);
    • Pickup weight: 6g allowed.
  • Cartridge: Cartridge system of the plug-in type.
    • Type: moving magnetic stereo cartridge.
      • Magnetic circuit: Full lamella core;
      • Frequency response: 10 Hz to 40 kHz
      • Output voltage: 2.5 mV at 1 kHz 5cm/s. Zero to peak, lateral

[7 mV at 1 kHz 10 cm/s. zero to peak, 45° (DIN 45 500)]

      • Channel separation: More than 22 dB at 1 kHz
      • Channel deviation: Within 1.8 dB at 1 kHz
      • Recommended final impedance: 47kΩ~100kΩ.
      • Nominal dynamic range: 12X10¯⁶cm/dyn at 100Hz
      • Needle pressure range: 1.25±0.25 g (12.5±2.5mN
      • Weight: 6 g ( pickup only)
      • Replacement needle: EPS-30ES.

Special Features

  • here, if available

Remarks[edit]

This rating refers to the drive section alone excluding influences from record, cartridge or tonearm, but including turntable. Measured using signals from the motor section's built-in frequency generator.

  • Other models in the same series:

Pictures[edit]

Reports[edit]

Links[edit]



Retrieved from "https://hifi-wiki.com/index.php?title=Technics_SL-QD3&oldid=98754"