Difference between revisions of "Ortofon MC 10 Supreme"
m |
|||
| (One intermediate revision by the same user not shown) | |||
| Line 1: | Line 1: | ||
__NOTOC__ | __NOTOC__ | ||
| − | == | + | == Data == |
| − | {{ | + | {{navigation}} |
| − | ''' | + | '''General''' |
| − | * | + | * Manufacturer: [[Ortofon]] |
| − | * | + | * Model: MC 10 Supreme |
| − | * | + | * Years of manufacture: |
| − | * | + | * Made in: Denmark |
| − | * | + | * Colour: black |
| − | * | + | * Weight: 10,5 g |
| − | * | + | * Original price: approx. 450,- € (MC 10 Supreme Classic, as of: 2015) |
| − | ''' | + | '''Technical Data''' |
| − | * | + | * Principle: Moving Coil (MC) |
| − | * | + | * Frequency response: 20 - 25,000 Hz |
| − | * | + | * Channel separation: > 23 dB at 1 kHz |
| − | * | + | * Channel balance: 0 < 1,5 dB bei 1 kHz |
* Übersprechdämpfung: | * Übersprechdämpfung: | ||
| − | * Ausgangsspannung: > | + | * Ausgangsspannung: >.5 mV |
| − | * | + | * Terminating resistor: > 20 Ohm |
| − | * | + | * Internal resistance (DC): 5 Ohm |
| − | * | + | * Needle type: elliptical (r/R: 8/18 µm), bare on aluminium needle carrier |
| − | * | + | * Recommended contact force: 20 mN |
| − | * | + | * Needle compliance: 14 µm/mN |
| + | * Scanning capability at 315 Hz: 70 µm | ||
| − | |||
| − | |||
| − | == | + | == Remarks == |
| + | * Glass fibre reinforced aluminium needle carrier | ||
| − | == | + | == Pictures == |
| + | |||
| + | == Reports == | ||
== Links == | == Links == | ||
* [http://ortofon.com/hifi/products/historical-products/mc-supreme-series Ortofon MC Supreme Series] | * [http://ortofon.com/hifi/products/historical-products/mc-supreme-series Ortofon MC Supreme Series] | ||
| − | [[ | + | [[Category:Cartridges]]</1,5> |
Latest revision as of 12:27, 15 February 2016
Data[edit]
General
- Manufacturer: Ortofon
- Model: MC 10 Supreme
- Years of manufacture:
- Made in: Denmark
- Colour: black
- Weight: 10,5 g
- Original price: approx. 450,- € (MC 10 Supreme Classic, as of: 2015)
Technical Data
- Principle: Moving Coil (MC)
- Frequency response: 20 - 25,000 Hz
- Channel separation: > 23 dB at 1 kHz
- Channel balance: 0 < 1,5 dB bei 1 kHz
- Übersprechdämpfung:
- Ausgangsspannung: >.5 mV
- Terminating resistor: > 20 Ohm
- Internal resistance (DC): 5 Ohm
- Needle type: elliptical (r/R: 8/18 µm), bare on aluminium needle carrier
- Recommended contact force: 20 mN
- Needle compliance: 14 µm/mN
- Scanning capability at 315 Hz: 70 µm
Remarks[edit]
- Glass fibre reinforced aluminium needle carrier