Difference between revisions of "Nagaoka MP-200"
(Nadelnachgiebigkeit) |
(→Daten) |
||
| (One intermediate revision by one other user not shown) | |||
| Line 1: | Line 1: | ||
__NOTOC__ | __NOTOC__ | ||
| − | == | + | == Data == |
| − | {{ | + | {{navigation}} |
| − | ''' | + | '''General''' |
| − | * | + | * Manufacturer: [[Nagaoka]] |
| − | * | + | * Model: MP-200 |
| − | * | + | * Years of manufacture: |
| − | * | + | * Made in: Japan |
| − | * | + | * Color: purple |
| − | * | + | * Weight: 6,5 g |
| − | * | + | * Original price approx.: 480€ |
| − | ''' | + | '''Technical Data''' |
| − | * | + | * Principle: Moving Iron (MI) |
| − | * | + | * Frequency response: 20 - 23.000 Hz |
| − | * | + | * Channel separation: > 25 dB |
| − | * | + | * Channel balance: < 1.5 dB |
* Übersprechdämpfung: | * Übersprechdämpfung: | ||
| − | * Ausgangsspannung: > 4 mV | + | * Ausgangsspannung: >4 mV |
| − | * | + | * Terminating resistor: 47 kOhm |
| − | * | + | * Induction: |
| − | * | + | * Needle type: elliptical (r/R: 10/18 µm), soldered on boron needle carrier. |
| − | * | + | * Recommended contact force: 15 - 20 mN |
| − | * | + | * Needle compliance: 20 µm/mN |
| − | ''' | + | '''Special Features''' |
| + | == Remarks == | ||
| − | == | + | == Pictures == |
| − | == | + | == Reports == |
| − | |||
| − | |||
== Links == | == Links == | ||
| − | * [http://www.nagaoka.eu/index.php?action=home&lang=en Nagaoka phone cartridges and audio accessories with the authentic vinyl sound] | + | * [http://www.nagaoka.eu/index.php?action=home&lang=en Nagaoka phone cartridges and audio accessories with the authentic vinyl sound] |
| − | [[ | + | [[Category:Cartridges]]</1.5> |
Latest revision as of 11:52, 20 September 2017
Data[edit]
General
- Manufacturer: Nagaoka
- Model: MP-200
- Years of manufacture:
- Made in: Japan
- Color: purple
- Weight: 6,5 g
- Original price approx.: 480€
Technical Data
- Principle: Moving Iron (MI)
- Frequency response: 20 - 23.000 Hz
- Channel separation: > 25 dB
- Channel balance: < 1.5 dB
- Übersprechdämpfung:
- Ausgangsspannung: >4 mV
- Terminating resistor: 47 kOhm
- Induction:
- Needle type: elliptical (r/R: 10/18 µm), soldered on boron needle carrier.
- Recommended contact force: 15 - 20 mN
- Needle compliance: 20 µm/mN
Special Features