Difference between revisions of "Kenwood KR-2200"
(9 intermediate revisions by the same user not shown) | |||
Line 1: | Line 1: | ||
__NOTOC__ | __NOTOC__ | ||
− | == | + | == Data == |
− | {{ | + | {{navigation}} |
− | ''' | + | '''General''' |
− | * | + | * Manufacturer: [[Kenwood]] |
− | * | + | * Device type: Receiver |
− | * | + | * Model: KR-2200 |
− | * | + | * Years of manufacture: 1972 - 1974 |
+ | * Manufactured in: Japan | ||
+ | * Color: Silver / Black, walnut wooden cabinet | ||
+ | * Power consumption: 56 W | ||
+ | * Dimensions: 446 x 120 x 384 mm | ||
+ | * Weight: 6.1 kg | ||
+ | * Original price approx.: 800 DM | ||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
+ | '''Connections''' | ||
+ | * Number of inputs: | ||
+ | ** Phono MM: 3 mV, 50 kOhm. | ||
+ | ** Microphone: Level control / 6.3 mm jack plug on front panel | ||
+ | ** AUX: 120 mV, 30 kOhm | ||
+ | ** Tape Play: | ||
+ | *** Cinch: 120 mV, 30 kOhm | ||
+ | *** DIN: 30 mV, 80 kOhm | ||
+ | ** Antenna FM (75 Ohm Unbalanced / 300 Ohm Balanced), AM | ||
+ | * Number of Outputs: | ||
+ | ** Tape Rec: | ||
+ | *** Cinch: 150 mV, 100 Ohm | ||
+ | *** DIN: 30 mV, 80 kOhm | ||
+ | ** Headphones: 6.3 mm jack plug | ||
+ | ** 2 pairs of speakers | ||
− | |||
− | |||
− | |||
− | |||
− | |||
+ | '''Technical Data Tuner Part''' | ||
+ | * Reception: FM, MW | ||
+ | * Frequencies: | ||
+ | ** FM: 87.5 - 108 MHz | ||
+ | MW: 525 - 1605 kHz | ||
+ | * Frequency response: 20 - 15,000 Hz | ||
+ | * Input sensitivity: | ||
+ | ** FM: 2.5 µV (IHF) | ||
+ | MW: 25 µV | ||
+ | Distortion factor: | ||
+ | ** FM: 0.5 % (mono), 0.9 % (stereo). | ||
+ | ** MW: | ||
+ | * Signal-to-noise ratio: | ||
+ | ** FM: 69 dB | ||
+ | MW: 45 dB | ||
+ | * Channel separation: | ||
+ | ** FM: 40 dB (at 1 kHz) | ||
+ | * Selectivity: (IHF) | ||
+ | ** FM: 40 dB | ||
+ | ** MW: 25 dB | ||
+ | * Equal wave selection: | ||
+ | ** FM: | ||
+ | * Spurious wave selection: | ||
+ | ** FM: | ||
+ | * IF attenuation: | ||
+ | ** FM: | ||
+ | ** AM: | ||
+ | * IF attenuation: | ||
+ | ** FM: | ||
+ | * AM Suppression: | ||
− | |||
− | '' | + | '''Technical Data Amplifier Part''' |
− | * | + | * Continuous power: |
− | ** 8 Ohm: | + | ** 8 Ohm: 2 x 8 W |
− | + | 4 Ohm: 2 x 9 W | |
− | * | + | * Dynamic power |
− | ** 8 Ohm: | + | ** 8 Ohm: 20 W |
− | + | 4 Ohm: 22 W | |
− | * | + | * Total harmonic distortion: 1.0% (at nominal power) |
− | * | + | * Attenuation factor: 45 (8 Ohm) |
− | * | + | * Frequency response: 25 - 35,000 Hz |
− | * | + | * Signal-to-noise ratio: |
− | * | + | ** Phono: 60 dB |
− | * | + | ** Microphone: 60 dB |
− | ** | + | ** AUX, Tape: 70 dB |
− | ** | + | * Tone control: |
− | * | + | ** Bass: ± 8 dB at 100 Hz |
− | * | + | Treble: ± 8 dB at 10 kHz |
− | + | * Loudness: + 8 / + 5 dB (100 Hz / 10 kHz) | |
− | * | ||
− | |||
− | '' | + | '''Special Features''' |
− | * | + | * Microphone: Level control / 6.3 mm jack plug on front panel |
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | + | == Remarks == | |
− | * | + | * Other models in the same series: |
+ | * [[Kenwood KR-2200]] | ||
+ | * [[Kenwood KR-3200]] | ||
+ | * [[Kenwood KR-4200]] | ||
+ | * [[Kenwood KR-5200]] | ||
+ | * [[Kenwood KR-6200]] | ||
+ | * [[Kenwood KR-7200]] | ||
− | == | + | == Pictures == |
− | + | * Image: Kenwood KR-2200 Front | |
− | + | [[File:KR-2200-2.jpg]] | |
− | + | ||
− | * | + | |
− | + | * Picture: Kenwood KR-2200 rear | |
− | + | [[File:KR-2200-3.jpg]] | |
− | + | ||
+ | |||
+ | == Reports == | ||
− | |||
− | |||
− | |||
== Links == | == Links == | ||
− | [[ | + | |
+ | [[Category:Receiver]] |
Latest revision as of 09:00, 29 January 2019
Data[edit]
General
- Manufacturer: Kenwood
- Device type: Receiver
- Model: KR-2200
- Years of manufacture: 1972 - 1974
- Manufactured in: Japan
- Color: Silver / Black, walnut wooden cabinet
- Power consumption: 56 W
- Dimensions: 446 x 120 x 384 mm
- Weight: 6.1 kg
- Original price approx.: 800 DM
Connections
- Number of inputs:
- Phono MM: 3 mV, 50 kOhm.
- Microphone: Level control / 6.3 mm jack plug on front panel
- AUX: 120 mV, 30 kOhm
- Tape Play:
- Cinch: 120 mV, 30 kOhm
- DIN: 30 mV, 80 kOhm
- Antenna FM (75 Ohm Unbalanced / 300 Ohm Balanced), AM
- Number of Outputs:
- Tape Rec:
- Cinch: 150 mV, 100 Ohm
- DIN: 30 mV, 80 kOhm
- Headphones: 6.3 mm jack plug
- 2 pairs of speakers
- Tape Rec:
Technical Data Tuner Part
- Reception: FM, MW
- Frequencies:
- FM: 87.5 - 108 MHz
MW: 525 - 1605 kHz
- Frequency response: 20 - 15,000 Hz
- Input sensitivity:
- FM: 2.5 µV (IHF)
MW: 25 µV Distortion factor:
- FM: 0.5 % (mono), 0.9 % (stereo).
- MW:
- Signal-to-noise ratio:
- FM: 69 dB
MW: 45 dB
- Channel separation:
- FM: 40 dB (at 1 kHz)
- Selectivity: (IHF)
- FM: 40 dB
- MW: 25 dB
- Equal wave selection:
- FM:
- Spurious wave selection:
- FM:
- IF attenuation:
- FM:
- AM:
- IF attenuation:
- FM:
- AM Suppression:
Technical Data Amplifier Part
- Continuous power:
- 8 Ohm: 2 x 8 W
4 Ohm: 2 x 9 W
- Dynamic power
- 8 Ohm: 20 W
4 Ohm: 22 W
- Total harmonic distortion: 1.0% (at nominal power)
- Attenuation factor: 45 (8 Ohm)
- Frequency response: 25 - 35,000 Hz
- Signal-to-noise ratio:
- Phono: 60 dB
- Microphone: 60 dB
- AUX, Tape: 70 dB
- Tone control:
- Bass: ± 8 dB at 100 Hz
Treble: ± 8 dB at 10 kHz
- Loudness: + 8 / + 5 dB (100 Hz / 10 kHz)
Special Features
- Microphone: Level control / 6.3 mm jack plug on front panel
Remarks[edit]
- Other models in the same series:
- Kenwood KR-2200
- Kenwood KR-3200
- Kenwood KR-4200
- Kenwood KR-5200
- Kenwood KR-6200
- Kenwood KR-7200
Pictures[edit]
- Image: Kenwood KR-2200 Front
- Picture: Kenwood KR-2200 rear