Difference between revisions of "Kenwood KA-4010"
m |
|||
| (5 intermediate revisions by 2 users not shown) | |||
| Line 1: | Line 1: | ||
| − | * | + | __NOTOC__ |
| − | * | + | == Data == |
| − | + | {{navigation}} | |
| − | + | '''General''' | |
| + | * Manufacturer: [[Kenwood]] | ||
| + | * Model: KA-4010 | ||
| + | * Type: Integrated amplifier | ||
| + | * Years of manufacture: 1989 - 1990 | ||
| + | * Made in: Japan | ||
| + | * Color: Black | ||
| + | * Remote control: no | ||
| + | * Power consumption: 200 W max. | ||
| + | * Dimensions: 440 x 123 x 345 mm (WxHxD) | ||
| + | * Weight: 8.8 kg | ||
| + | * Original price approx.: 548 DM | ||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | + | '''Connections''' | |
| − | ''' | + | * Inputs: |
| + | ** Input sensitivity: | ||
| + | ** Phono MM: 2,5mV / 47kOhm | ||
| + | ** Phono MC: 0,2mV / 100Ohm | ||
| + | ** Max. Phono input level: 145mV (MM) / 12mV (MC) | ||
| + | ** Phono input capacitance: 150pF (MM,MC) | ||
| + | ** CD, Tuner Tape, AUX: 150mV / 47kOhm. | ||
| + | * Outputs: | ||
| + | ** Speaker: A and B, A/B | ||
| + | ** Headphone jack | ||
| − | |||
| − | |||
| − | |||
| − | |||
| − | + | '''Specifications''' | |
| + | * Output power: | ||
| + | ** Sine power into 4 ohms (DIN):2 x 95W | ||
| + | Dynamic output power into 2 Ohm (EIA): 2 x 155W | ||
| + | * Attenuation factor:200 at 50Hz | ||
| + | * Total harmonic distortion (at rated power into 8 OHM):0.08% | ||
| + | * Noise Voltage Ratio (IHF-A): | ||
| + | ** Phono MM: 86dB | ||
| + | Phono MC: 67dB | ||
| + | ** CD, Tuner Tape, AUX:106dB (Direct). | ||
| + | Frequency Response: | ||
| + | ** RIAA:20 - 20,000Hz (-0.3dB). | ||
| + | CD, Tuner Tape, AUX: 20 - 70,000Hz (0 / -3dB) | ||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | + | '''Special Features''' | |
| + | * Two-stage Darlington amplifier circuitry | ||
| + | * Discrete circuit design with high quality components | ||
| + | * Signal Pure Ground Line isolated from ground | ||
| + | * Logical Flow principle for ultra-short signal paths | ||
| + | * Practical phono input - MM/MW switchable | ||
| + | * Source Direct switch | ||
| + | * Two Band Inputs and Outputs | ||
| + | * Bass boost for low bass (+3dB at 100Hz) | ||
| + | * Channel-separated volume controls | ||
| + | * Connection for two pairs of speakers - A/B switchable | ||
| + | * Point-mounted full-metal chassis | ||
| + | * Special feet for impact sound damping | ||
| + | * Transformer winding made of oxygen-free copper | ||
| − | |||
| − | |||
| − | |||
| − | + | == Notes == | |
| − | * | + | * Other models in the same series: |
| − | * | + | * [[Kenwood KA-1010]] |
| + | * [[Kenwood KA-3010]] | ||
| + | * [[Kenwood KA-4010]] | ||
| + | * [[Kenwood KA-5010]] | ||
| + | * [[Kenwood KA-7010]] | ||
| − | |||
| − | |||
| − | |||
| − | + | == Pictures == | |
| + | * Image: Kenwood KA-4010 | ||
| + | [[File:Kenwood KA-4010-1989.jpg]] | ||
| − | |||
| + | == Reports == | ||
| − | + | [[File:Kenwood KA-4010-Daten-1989.jpg]] | |
| − | |||
| − | |||
| − | |||
| − | |||
== Links == | == Links == | ||
| − | [[ | + | |
| − | + | [[Category:Integrated amplifier]] | |
Latest revision as of 09:25, 2 December 2020
Data
General
- Manufacturer: Kenwood
- Model: KA-4010
- Type: Integrated amplifier
- Years of manufacture: 1989 - 1990
- Made in: Japan
- Color: Black
- Remote control: no
- Power consumption: 200 W max.
- Dimensions: 440 x 123 x 345 mm (WxHxD)
- Weight: 8.8 kg
- Original price approx.: 548 DM
Connections
- Inputs:
- Input sensitivity:
- Phono MM: 2,5mV / 47kOhm
- Phono MC: 0,2mV / 100Ohm
- Max. Phono input level: 145mV (MM) / 12mV (MC)
- Phono input capacitance: 150pF (MM,MC)
- CD, Tuner Tape, AUX: 150mV / 47kOhm.
- Outputs:
- Speaker: A and B, A/B
- Headphone jack
Specifications
- Output power:
- Sine power into 4 ohms (DIN):2 x 95W
Dynamic output power into 2 Ohm (EIA): 2 x 155W
- Attenuation factor:200 at 50Hz
- Total harmonic distortion (at rated power into 8 OHM):0.08%
- Noise Voltage Ratio (IHF-A):
- Phono MM: 86dB
Phono MC: 67dB
- CD, Tuner Tape, AUX:106dB (Direct).
Frequency Response:
- RIAA:20 - 20,000Hz (-0.3dB).
CD, Tuner Tape, AUX: 20 - 70,000Hz (0 / -3dB)
Special Features
- Two-stage Darlington amplifier circuitry
- Discrete circuit design with high quality components
- Signal Pure Ground Line isolated from ground
- Logical Flow principle for ultra-short signal paths
- Practical phono input - MM/MW switchable
- Source Direct switch
- Two Band Inputs and Outputs
- Bass boost for low bass (+3dB at 100Hz)
- Channel-separated volume controls
- Connection for two pairs of speakers - A/B switchable
- Point-mounted full-metal chassis
- Special feet for impact sound damping
- Transformer winding made of oxygen-free copper
Notes
- Other models in the same series:
- Kenwood KA-1010
- Kenwood KA-3010
- Kenwood KA-4010
- Kenwood KA-5010
- Kenwood KA-7010
Pictures
- Image: Kenwood KA-4010
Reports
