Difference between revisions of "MeroVinger DSP 09/00"
m (hat „DSP 09/00“ nach „MeroVinger DSP 09/00“ verschoben) |
|||
| (One intermediate revision by one other user not shown) | |||
| Line 1: | Line 1: | ||
__NOTOC__ | __NOTOC__ | ||
| − | == | + | == Data == |
| − | {{ | + | {{navigation}} |
| − | ''' | + | '''General''' |
| − | * | + | * Manufacturer: [[meroVinger Audio Systeme]] |
| − | * | + | * Model: DSP 09/00 |
| − | * | + | * Year of manufacture: from 2013 |
| − | * | + | * Color: Housing black, front / cover as desired |
| − | * | + | * Type: DSP-controlled stereo power amplifier with switching amplifiers |
| − | * | + | * Remote control: On request for ON/OFF |
| − | * | + | * Dimensions: WxHxD 230x80x280 (without feet, different if front panel higher than body). |
| − | * | + | * Weight: |
| − | * | + | * New price approx.: from 849,-. |
| − | ''' | + | '''Connections''' |
| − | * | + | * Number of inputs: |
| − | ** 2x XLR ( | + | ** 2x XLR (right/left) |
| − | + | 2x Cinch (right/left) | |
| − | * | + | * Number of outputs: |
| − | ** 2x | + | ** 2x speaker jacks f. bananas |
| − | ''' | + | '''Technical Data''' |
| − | * | + | * Continuous power |
** 8 Ohm: 2x50 Watt | ** 8 Ohm: 2x50 Watt | ||
** 4 Ohm: 2x90 Watt | ** 4 Ohm: 2x90 Watt | ||
| − | * | + | * distortion factor: |
| − | ** | + | ** <0.05% at 75 watts / 4 ohms |
| − | * | + | * Frequency response: 20 - 35,000 Hz (+-0.5dB) |
| − | * | + | * Signal-to-noise ratio: >95dB |
| − | * | + | * Stereo channel separation: ~80dB/1kHz/1Watt |
| − | ''' | + | '''Special Features''' |
| − | * 3- | + | * 3-channel DSP with per channel |
| − | ** | + | ** 10 freely selectable filters per channel (Bell, Notch, Highpass with variable Q, Lowpass with variable Q, High Shelf, Low Shelf, Bandpass, Allpass) |
| − | ** | + | ** 10 freely selectable filters per input (as above) |
| − | ** | + | ** high pass / low pass per output and input, Bessel 6/12/18/24, Butterworth 6/12/18/24, Linkwitz/Riley 6/12/18/24 |
| − | ** Limiter / Delay ( | + | ** Limiter / Delay (inputs each up to approx. converted 8 meters, outputs up to approx. 2 meters) |
| − | == | + | == Remarks == |
| − | + | Other models of the same series: | |
| − | * DSP 12/00 | + | * [[DSP 12/00]] |
| − | * DSP 23/00 | + | * [[DSP 23/00]] |
| − | == | + | == Pictures == |
http://www.merovinger-audio.de/wordpress/wp-content/uploads/2013/09/Geh-1.jpg | http://www.merovinger-audio.de/wordpress/wp-content/uploads/2013/09/Geh-1.jpg | ||
| − | == | + | == Reports == |
== Links == | == Links == | ||
| − | [[ | + | [[Category:Power Amplifiers]] |
Latest revision as of 12:41, 14 December 2014
Data[edit]
General
- Manufacturer: meroVinger Audio Systeme
- Model: DSP 09/00
- Year of manufacture: from 2013
- Color: Housing black, front / cover as desired
- Type: DSP-controlled stereo power amplifier with switching amplifiers
- Remote control: On request for ON/OFF
- Dimensions: WxHxD 230x80x280 (without feet, different if front panel higher than body).
- Weight:
- New price approx.: from 849,-.
Connections
- Number of inputs:
- 2x XLR (right/left)
2x Cinch (right/left)
- Number of outputs:
- 2x speaker jacks f. bananas
Technical Data
- Continuous power
- 8 Ohm: 2x50 Watt
- 4 Ohm: 2x90 Watt
- distortion factor:
- <0.05% at 75 watts / 4 ohms
- Frequency response: 20 - 35,000 Hz (+-0.5dB)
- Signal-to-noise ratio: >95dB
- Stereo channel separation: ~80dB/1kHz/1Watt
Special Features
- 3-channel DSP with per channel
- 10 freely selectable filters per channel (Bell, Notch, Highpass with variable Q, Lowpass with variable Q, High Shelf, Low Shelf, Bandpass, Allpass)
- 10 freely selectable filters per input (as above)
- high pass / low pass per output and input, Bessel 6/12/18/24, Butterworth 6/12/18/24, Linkwitz/Riley 6/12/18/24
- Limiter / Delay (inputs each up to approx. converted 8 meters, outputs up to approx. 2 meters)
Remarks[edit]
Other models of the same series:
Pictures[edit]
