Difference between revisions of "Camtech V102"

 
(→‎Daten)
 
(7 intermediate revisions by 5 users not shown)
Line 1: Line 1:
−
Der V102 ist ein Vollverstärker mit single ended MC und MM Phonoverstärker. Die Vorstufe ist ebenfalls single ended. Die Endstufen sind Gegentaktverstärker. Das Gerät hat brückbare Klangregelungen, der Vor- und der End-Verstärker sind auftrennbar.
+
__NOTOC__
 +
== Data ==
 +
{{navigation}}
 +
'''General'''
 +
* Manufacturer: Cambridge Systems Technology
 +
* Model: V 102
 +
* Year of manufacture: 1995 - 1998
 +
* Made in: UK
 +
* Colour: black
 +
* Type: (Digital/Analogue) analogue
 +
* Remote control: no
 +
* Power consumption: min. 25 VA / max. 250 VA
 +
* Dimensions: (WxHxD) 445x74x318 mm.
 +
* Weight: 8.0 kg
 +
* Original price approx.: 1.980.- DM
  
−
Die Betriebsspannungen der Vorstufen hängen an der Plus-Spannung der Endstufen. Die Plus- und Minus-Spannungen liegen folglich 0,5 Volt auseinander, was Probleme bei der Stabilität der Endstufen bereiten kann.
+
 
 +
'''Connections'''
 +
* Number of inputs:
 +
** Phono MM 3.750 mV at 47.0 kΩ and 85.0 pF.
 +
** Phono MC 0.250 mV at 0.1 kΩ and 3.3 nF
 +
** Tuner 185.0 mV at 20.0 kΩ
 +
CD 185.0 mV at 20.0 kΩ 
 +
Video 185.0 mV at 20.0 kΩ
 +
Tape1 185.0 mV at 20.0 kΩ
 +
Tape2 185.0 mV at 20.0 kΩ
 +
Main In 0.7 Volt 100 Ω
 +
 
 +
* Number of Outputs:
 +
** Video
 +
** Tape1
 +
** Tape2
 +
** Pre Out 0.7 Volt at 1 kΩ, 100 Ω
 +
** Speaker1 Direct or Switched 4 -16 Ω
 +
Speaker2 Direct or Switched 4 -16 Ω
 +
Headphone 300Ω suitable for headphones with 8 - 2000 Ohm
 +
 
 +
'''Technical Data'''
 +
* Continuous power (at distortion).
 +
** 8 Ohm: 45 + 45 Watt at 8 Ω (nominal power) &gt;= 60 Watt 20-20.000 Hz < 0,5% TDH+N 
 +
** 4 Ohm:                                    >=105</0,5%> Watt < 0,5% TDH+N 
 +
** 4 Ohm:                                    >
 +
** 2 Ohm: &gt;=135 Watt   
 +
* Dynamic power
 +
** 8 Ohm:
 +
** 4 Ohm:
 +
** 2 ohms: &gt;= 180 watts   
 +
* Total harmonic distortion: &lt;= 0.05 %
 +
* Attenuation Factor:
 +
* Frequency Response:
 +
** Phono MC: &lt;=± 1.0 db, 20 - 20,000 Hz.
 +
** Phono MM: &lt;=± 0.5 db, 20 - 20,000 Hz
 +
** Tuner, CD, Video, Tape1+2 <=± 0,5 db, 20 - 20.000 Hz 
 +
* Signalrauschabstand:
 +
** Phono MC                    >= - 72 db at 0,1 kΩ
 +
Phono MM &gt;= - 78 db at 0.1 kΩ
 +
** Tuner, CD, Video, Tape 1 + 2 &gt;= - 95 db at 0.1 kΩ 
 +
* Stereo channel separation:
 +
** 1 KHz &gt;= - 60 db
 +
10 KHz &gt;= - 42 db
 +
** 15 KHz &gt;= - 36 db
 +
* Tone control:
 +
** Bass: ± 6.0 db at 20 Hz
 +
treble: ± 6.0 db at 20 KHz
 +
* Loudness: no
 +
* High Filter: no
 +
* Low Filter (Subsonic): no
 +
* Mute: no
 +
* Direct/Line-Straight: no
 +
 
 +
 
 +
'''Special Features'''
 +
* Record Out Selector
 +
 
 +
== Remarks ==
 +
Model V 102L contains a different circuit concept and the phono preamplifier is missing.
 +
* Dt. model was lowered after defaults of the company Puellmanns in the level of the Phonovorstufe around 6 db.
 +
 
 +
== Pictures ==
 +
The V102L (the "L" stands for "line") lacks tone controls, switchable speaker input, phono inputs. The preamp has been lowered by the preamp gain factor 6db. The cable bridges at the preamplifier, power amplifier output and input are omitted. This is now solved in the device with wire bridges. The outer appearance is very similar to the "amplifier" (but the V102L cannot be remote controlled). The speaker terminals do not accept bananas. The V102L is the last unit distributed by CAMTECH and was only on the market for a few months.
 +
 
 +
== Reviews ==
 +
 
 +
== Links ==
 +
 
 +
[[Category:Integrated amplifier]]</=±></0,5%>

Latest revision as of 04:26, 7 October 2009

Data[edit]

General

  • Manufacturer: Cambridge Systems Technology
  • Model: V 102
  • Year of manufacture: 1995 - 1998
  • Made in: UK
  • Colour: black
  • Type: (Digital/Analogue) analogue
  • Remote control: no
  • Power consumption: min. 25 VA / max. 250 VA
  • Dimensions: (WxHxD) 445x74x318 mm.
  • Weight: 8.0 kg
  • Original price approx.: 1.980.- DM


Connections

  • Number of inputs:
    • Phono MM 3.750 mV at 47.0 kΩ and 85.0 pF.
    • Phono MC 0.250 mV at 0.1 kΩ and 3.3 nF
    • Tuner 185.0 mV at 20.0 kΩ

CD 185.0 mV at 20.0 kΩ Video 185.0 mV at 20.0 kΩ Tape1 185.0 mV at 20.0 kΩ Tape2 185.0 mV at 20.0 kΩ Main In 0.7 Volt 100 Ω

  • Number of Outputs:
    • Video
    • Tape1
    • Tape2
    • Pre Out 0.7 Volt at 1 kΩ, 100 Ω
    • Speaker1 Direct or Switched 4 -16 Ω

Speaker2 Direct or Switched 4 -16 Ω Headphone 300Ω suitable for headphones with 8 - 2000 Ohm

Technical Data

  • Continuous power (at distortion).
    • 8 Ohm: 45 + 45 Watt at 8 Ω (nominal power) >= 60 Watt 20-20.000 Hz < 0,5% TDH+N
    • 4 Ohm: >=105</0,5%> Watt < 0,5% TDH+N
    • 4 Ohm: >
    • 2 Ohm: >=135 Watt
  • Dynamic power
    • 8 Ohm:
    • 4 Ohm:
    • 2 ohms: >= 180 watts
  • Total harmonic distortion: <= 0.05 %
  • Attenuation Factor:
  • Frequency Response:
    • Phono MC: <=± 1.0 db, 20 - 20,000 Hz.
    • Phono MM: <=± 0.5 db, 20 - 20,000 Hz
    • Tuner, CD, Video, Tape1+2 <=± 0,5 db, 20 - 20.000 Hz
  • Signalrauschabstand:
    • Phono MC >= - 72 db at 0,1 kΩ

Phono MM >= - 78 db at 0.1 kΩ

    • Tuner, CD, Video, Tape 1 + 2 >= - 95 db at 0.1 kΩ
  • Stereo channel separation:
    • 1 KHz >= - 60 db

10 KHz >= - 42 db

    • 15 KHz >= - 36 db
  • Tone control:
    • Bass: ± 6.0 db at 20 Hz

treble: ± 6.0 db at 20 KHz

  • Loudness: no
  • High Filter: no
  • Low Filter (Subsonic): no
  • Mute: no
  • Direct/Line-Straight: no


Special Features

  • Record Out Selector

Remarks[edit]

Model V 102L contains a different circuit concept and the phono preamplifier is missing.

  • Dt. model was lowered after defaults of the company Puellmanns in the level of the Phonovorstufe around 6 db.

Pictures[edit]

The V102L (the "L" stands for "line") lacks tone controls, switchable speaker input, phono inputs. The preamp has been lowered by the preamp gain factor 6db. The cable bridges at the preamplifier, power amplifier output and input are omitted. This is now solved in the device with wire bridges. The outer appearance is very similar to the "amplifier" (but the V102L cannot be remote controlled). The speaker terminals do not accept bananas. The V102L is the last unit distributed by CAMTECH and was only on the market for a few months.

Reviews[edit]

Links[edit]

</=±></0,5%>

Retrieved from "https://hifi-wiki.com/index.php?title=Camtech_V102&oldid=47418"