Difference between revisions of "Teac A-X 800 DC"
m (hat „Teac A-X 800“ nach „Teac A-X 800 DC“ verschoben) |
|||
| (15 intermediate revisions by 3 users not shown) | |||
| Line 1: | Line 1: | ||
| − | ''' | + | __NOTOC__ |
| + | == Data == | ||
| + | '''''Teac Stereo Integrated Amplifier A-X 800 DC''''' | ||
| + | {{navigation}} | ||
| + | '''General:''' | ||
| + | * Brand: [[Teac]] | ||
| + | * Model: A-X 800 DC | ||
| + | * Power consumption: 425 watts (Manual) 390W | ||
| + | * Dimensions (WxHxD): 435 x 152 x 325 mm | ||
| + | *Weight (net): 9.0 kg (19.871 Ibs) | ||
| + | |||
| + | |||
| + | '''Technical data:''' | ||
| − | + | Output Power: | |
| + | 75 watts per channel minimum RMS, both channels driven into 8 ohms | ||
| + | from 40 Hz to 20 kHz with no more than 0.05% total harmonic distortion. | ||
| − | + | Input Sensitivity/Impedance: | |
| − | + | PHONO | |
| − | + | MM: 2.5 mV/47 kohms | |
| − | + | MC: 250 pV/100 ohms | |
| − | + | CD/VCR, TAPE1/DAT, TAPE2, TUNER: 150 mV/30 kohms | |
| − | + | MIC: 0.6 mV/47 kohms | |
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | + | Frequency Response: | |
| − | + | CD/VCR, TAPE1/DAT, TAPE2, TUNER: 5 Hz-40 kHz | |
| + | -3 dB (Line In to SP Out) | ||
| + | PHONO: 20 Hz-20 kHz +/-0.5 dB (RIAA) | ||
| − | == | + | Total Harmonic Distortion: |
| − | [[ | + | 0.05% |
| − | == | + | |
| + | Damping Factor: | ||
| + | 30 (1W, 50 Hz) | ||
| + | |||
| + | Output Level/Impedance: | ||
| + | TAPE1/DAT, TAPE2: 142 mV/1 kohm | ||
| + | |||
| + | Signal-to-Noise Ratio (IHF A Network): | ||
| + | CD/VCR, TAPE1/DAT, TAPE2, TUNER: 96 dB | ||
| + | PHONO | ||
| + | MM: 80 dB | ||
| + | MC: 60 dB | ||
| + | |||
| + | Tone Control: | ||
| + | Bass: +/-10 dB at 100 Hz | ||
| + | Mid: +/-6 dB at 1 kHz | ||
| + | Treble: +/-10 dB at 10 kHz | ||
| + | |||
| + | Loudness Control: | ||
| + | -15/-24/-17 dB at 100 Hz/1 kHz/10 kHz | ||
| + | |||
| + | Filter: | ||
| + | High Filter -3 dB at 10 kHz | ||
| + | Low Filter -3 dB at 100 Hz | ||
| + | |||
| + | Muting: | ||
| + | -20 dB | ||
| + | |||
| + | == Pictures == | ||
| + | [[File:Teac A-X 800.jpg]] | ||
| + | [[File:Teac_A_X800DC.jpg|Beschreibung]] | ||
| + | |||
| + | == Reviews == | ||
== Links == | == Links == | ||
| − | [[ | + | [[Category:Integrated amplifier]] |
| − | |||
Latest revision as of 15:23, 9 March 2025
Data
Teac Stereo Integrated Amplifier A-X 800 DC
General:
- Brand: Teac
- Model: A-X 800 DC
- Power consumption: 425 watts (Manual) 390W
- Dimensions (WxHxD): 435 x 152 x 325 mm
- Weight (net): 9.0 kg (19.871 Ibs)
Technical data:
Output Power: 75 watts per channel minimum RMS, both channels driven into 8 ohms from 40 Hz to 20 kHz with no more than 0.05% total harmonic distortion.
Input Sensitivity/Impedance: PHONO MM: 2.5 mV/47 kohms MC: 250 pV/100 ohms CD/VCR, TAPE1/DAT, TAPE2, TUNER: 150 mV/30 kohms MIC: 0.6 mV/47 kohms
Frequency Response: CD/VCR, TAPE1/DAT, TAPE2, TUNER: 5 Hz-40 kHz -3 dB (Line In to SP Out) PHONO: 20 Hz-20 kHz +/-0.5 dB (RIAA)
Total Harmonic Distortion: 0.05%
Damping Factor: 30 (1W, 50 Hz)
Output Level/Impedance: TAPE1/DAT, TAPE2: 142 mV/1 kohm
Signal-to-Noise Ratio (IHF A Network): CD/VCR, TAPE1/DAT, TAPE2, TUNER: 96 dB PHONO MM: 80 dB MC: 60 dB
Tone Control: Bass: +/-10 dB at 100 Hz Mid: +/-6 dB at 1 kHz Treble: +/-10 dB at 10 kHz
Loudness Control: -15/-24/-17 dB at 100 Hz/1 kHz/10 kHz
Filter: High Filter -3 dB at 10 kHz Low Filter -3 dB at 100 Hz
Muting: -20 dB
Pictures
