Difference between revisions of "Kenwood KX-5010"
(→Daten) |
|||
| (33 intermediate revisions by 6 users not shown) | |||
| Line 1: | Line 1: | ||
| − | {{ | + | __NOTOC__ |
| − | * | + | == Data == |
| − | * | + | {{navigation}} |
| − | * | + | '''General''' |
| − | * | + | * Manufacturer: [[Kenwood]] |
| − | * | + | * Model: KX-5010 |
| − | + | * Type: Compact Cassette Tape Deck | |
| − | * | + | * Type: Front loader |
| − | * | + | * Years of manufacture: 1989 - 1992 |
| − | * | + | * Made in: Japan |
| − | + | * Color: Black | |
| − | + | * Remote control: optional (RC-X9010) | |
| − | + | * Power supply: 220 V / 50 Hz | |
| − | + | * Power consumption: 25 W | |
| − | + | * Dimensions: 440 x 127 x 321 mm (WxHxD) | |
| − | + | * Mass: 6.4 kg | |
| − | + | * Original price: 798 DM (equivalent to approx. 408 EUR) | |
| − | |||
| − | * | ||
| − | |||
| − | * | ||
| − | * | ||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | * | ||
| − | == | + | |
| − | [[ | + | '''Technical Data''' |
| + | * HF premagnetization: 105 kHz | ||
| + | * Audio heads: 2 (record/playback head made of amorphous alloy, erase head double split ferrite) | ||
| + | * Motors: 3 (1 FG servo rotor for direct drive of tone shaft, 1 DC auxiliary motor each for winding plate and mechanics) | ||
| + | * Variation in synchronism: 0.025 % (effectively rated) / 0.075 % (DIN) | ||
| + | * Tape types: IEC Type I, II, IV | ||
| + | * Frequency response: | ||
| + | ** Type IV: 20 Hz - 21 kHz (+/- 3 dB). | ||
| + | Type II: 20 Hz - 19 kHz (+/- 3 dB) | ||
| + | Type I: 20 Hz - 18 kHz (+/- 3 dB) | ||
| + | * Distortion factor: < 0.8 % (1 kHz) | ||
| + | * Signal-to-noise ratio (Type IV): | ||
| + | ** with Dolby C: 74 dB | ||
| + | ** with Dolby B: 67 dB | ||
| + | without Dolby: 59 dB | ||
| + | * Input sensitivity/impedance: | ||
| + | ** Line RCA/RCA R/L = 77.5 mV / 50 kOhm. | ||
| + | ** Microphone 6.35 mm jack R/L = 0.3 mV / 600 Ohm | ||
| + | * Output level/impedance: | ||
| + | ** Line RCA/RCA R/L = 490 mV / 2 kOhm | ||
| + | ** Headphones 6.35 mm jack = 30 mW / 8 Ohm (level control max.) | ||
| + | * Noise reduction Dolby B, C, dynamic extension HX-Pro | ||
| + | |||
| + | |||
| + | '''Special Features''' | ||
| + | * Super-TLLE constant current pickup amplifier | ||
| + | * Amorphous metal head with extra long lifetime | ||
| + | * 2-motor Logic Transport Control | ||
| + | * Illuminated cassette compartment | ||
| + | * Automatic tape type selection | ||
| + | * Automatic Tape Calibration System ATCS | ||
| + | * Digital real-time counting drive | ||
| + | * Fluorescent display with linear counter | ||
| + | * Single track repeat function | ||
| + | * Index Scan (track search) | ||
| + | * Blank Search (blank search) | ||
| + | Rewind with playback start | ||
| + | * Re-record standby (for re-recording from start point) | ||
| + | * Timer switch for recording/playback | ||
| + | * MPX filter (switchable) | ||
| + | * Headphone output with level control, gold-plated | ||
| + | * Microphone input R/L, gold-plated | ||
| + | * Full metal housing | ||
| + | |||
| + | == Notes == | ||
| + | Other models in the same series: | ||
| + | * [[Kenwood KX-1010|KX-1010]] | ||
| + | * [[Kenwood KX-3010|KX-3010]] | ||
| + | * [[Kenwood KX-3510|KX-3510]] | ||
| + | * [[Kenwood KX-5010|KX-5010]] | ||
| + | * [[Kenwood KX-9010|KX-9010]] | ||
| + | |||
| + | Predecessor model: [[Kenwood KX-880 HX|KX-880 HX]] | ||
| + | |||
| + | Successor model: [[Kenwood KX-7030|KX-7030]] | ||
| + | |||
| + | == Pictures == | ||
| + | * Image: Kenwood KX-5010 | ||
| + | [[File:Kx5010.jpg]] | ||
| + | |||
| + | |||
| + | * Excerpt from Kenwood catalog Hifi '89/'90 | ||
| + | [[File:Kenwood_KX-5010_(Hifi_89-90).jpg]] | ||
| + | |||
| + | == Reports == | ||
| + | |||
| + | |||
| + | == Links == | ||
| + | |||
| + | |||
| + | [[Category:Cassette decks]] | ||
Latest revision as of 05:31, 17 February 2021
Data[edit]
General
- Manufacturer: Kenwood
- Model: KX-5010
- Type: Compact Cassette Tape Deck
- Type: Front loader
- Years of manufacture: 1989 - 1992
- Made in: Japan
- Color: Black
- Remote control: optional (RC-X9010)
- Power supply: 220 V / 50 Hz
- Power consumption: 25 W
- Dimensions: 440 x 127 x 321 mm (WxHxD)
- Mass: 6.4 kg
- Original price: 798 DM (equivalent to approx. 408 EUR)
Technical Data
- HF premagnetization: 105 kHz
- Audio heads: 2 (record/playback head made of amorphous alloy, erase head double split ferrite)
- Motors: 3 (1 FG servo rotor for direct drive of tone shaft, 1 DC auxiliary motor each for winding plate and mechanics)
- Variation in synchronism: 0.025 % (effectively rated) / 0.075 % (DIN)
- Tape types: IEC Type I, II, IV
- Frequency response:
- Type IV: 20 Hz - 21 kHz (+/- 3 dB).
Type II: 20 Hz - 19 kHz (+/- 3 dB) Type I: 20 Hz - 18 kHz (+/- 3 dB)
- Distortion factor: < 0.8 % (1 kHz)
- Signal-to-noise ratio (Type IV):
- with Dolby C: 74 dB
- with Dolby B: 67 dB
without Dolby: 59 dB
- Input sensitivity/impedance:
- Line RCA/RCA R/L = 77.5 mV / 50 kOhm.
- Microphone 6.35 mm jack R/L = 0.3 mV / 600 Ohm
- Output level/impedance:
- Line RCA/RCA R/L = 490 mV / 2 kOhm
- Headphones 6.35 mm jack = 30 mW / 8 Ohm (level control max.)
- Noise reduction Dolby B, C, dynamic extension HX-Pro
Special Features
- Super-TLLE constant current pickup amplifier
- Amorphous metal head with extra long lifetime
- 2-motor Logic Transport Control
- Illuminated cassette compartment
- Automatic tape type selection
- Automatic Tape Calibration System ATCS
- Digital real-time counting drive
- Fluorescent display with linear counter
- Single track repeat function
- Index Scan (track search)
- Blank Search (blank search)
Rewind with playback start
- Re-record standby (for re-recording from start point)
- Timer switch for recording/playback
- MPX filter (switchable)
- Headphone output with level control, gold-plated
- Microphone input R/L, gold-plated
- Full metal housing
Notes[edit]
Other models in the same series:
Predecessor model: KX-880 HX
Successor model: KX-7030
Pictures[edit]
- Image: Kenwood KX-5010
- Excerpt from Kenwood catalog Hifi '89/'90
.jpg)