T+A Pulsar PA 1520 R

Brand: T+A

Model: Pulsar PA 1520 R

Technical data

• Preamplifier:
  • Frequency response +/- 0-3 dB: 0.5 Hz - 400 kHz.
  • Foreign/noise voltage spacing:
    • High level: 8 x 104/109 dB
    • Phono MM: 82/86 dB (special version)
    • Phone MC: 78/82 dB (special version)

Subsonic filter fixed (special version) Distortion factor: < 0.001 % Intermodulation: < 0,001 %

• • Kanaltrennung: >90 dB
  • Input sensitivity nominal:
    • High level: 250 mV/20 kOhm
    • MM: 1-5 mV 16 Capacities
    • MC: 60-1,000 µV 16 capacitors
  • Outputs:
    • Headphones 50 Ohm
    • 2 x tape: 250 mV/100 Ohm
    • PRE out Cinch:
      • nominal: 1 V eff.
      • maximum: 9.5 V rms

Impedance: 22 Ohm

• • Decoder interface with fixed level (TASI) available.
• power amplifier:
  • Nominal power:
    • per channel into 8 ohms: 180 watts
    • both channels simultaneously into 4 ohms: 260 watts
  • Pulse power:
    • at 8 ohms: 200 watts
    • at 4 ohms: 300 watts
  • Power bandwidth: 1 Hz-300 kHz

frequency response +/- 0-3 dB: 1 Hz-400 kHz slew rate: 60 V/µs

• • Attenuation factor: > 500
  • Noise floor: > 110 dB

Distortion factor: < 0.002 % **Screening: 80000 µs

• • Screening: 80000 µF
• Mains connection 110 V or 220 / 240 V, 50 Hz 650 VA
• Dimensions (H x W x D): 150 x 440 x 390 mm
• Weight: 18,5 kg

Remarks

Special equipment: Phonomodule replaces one HP input

Other models of the same series:

• PA 1200 R
• PA 1220 R
• PA 1230 R
• PA 1260 R
• PA 1500 R
• PA 1520 R
• PA 1530 R

Pictures

Links

</0,001>