Difference between revisions of "Rotel RX-803"
(Die Seite wurde neu angelegt: „'''Marke''': Rotel '''Modell''': RX-803 Anzahl der Kanäle: 2 == Technische Daten == *Leistung: 2 x 120 W (DIN) *Übertragungsbereich: 5-50.000 Hz *Klirrfa…“) |
|||
(11 intermediate revisions by the same user not shown) | |||
Line 1: | Line 1: | ||
− | ''' | + | __NOTOC__ |
+ | == Data == | ||
+ | {{navigation}} | ||
+ | '''General''' | ||
+ | * Manufacturer: [[Rotel]] | ||
+ | * Model: RX-803 | ||
+ | * Years of manufacture: 1976 - 1981 | ||
+ | * Made in: Japan | ||
+ | * Color: silver, metal housing with handles | ||
+ | * Remote control: no | ||
+ | * Power consumption: | ||
+ | * Dimensions (WxHxD): 490 x 145 x 430 mm. | ||
+ | * Weight: 16 kg | ||
+ | * Original price approx.: 550 US-$, 1'800 DM | ||
+ | |||
+ | |||
+ | '''Connections''' | ||
+ | * Number of inputs: | ||
+ | ** Phono MM: 2 mV, 50 kOhm | ||
+ | Aux: 150 mV, 50 kOhm, max. 15 V | ||
+ | ** Tape Play 1, 2: 150 mV, 50 kOhm, max. 15 V | ||
+ | Main In: 1.5 V, 50 kOhm | ||
+ | ** Antenna FM (75/300 Ohm), MW (300 Ohm). | ||
+ | * Number of outputs: | ||
+ | ** Tape Rec 1, 2: 350 mV, 3.3 kOhm | ||
+ | ** Tape Rec DIN: 120 mV, 90 kOhm | ||
+ | ** Pre Out: | ||
+ | ** Headphones: | ||
+ | ** 2 pairs of speakers | ||
+ | |||
+ | |||
+ | '''Technical Specifications''' | ||
+ | |||
+ | ''Amplifier'' | ||
+ | * Continuous power (at distortion) | ||
+ | ** 8 Ohm: 2x 80 Watt (20 Hz - 20'000 Hz) | ||
+ | ** 4 Ohm: 2x 120 Watt (1 kHz) | ||
+ | * Dynamic power | ||
+ | ** 8 Ohm: | ||
+ | ** 4 Ohm: | ||
+ | * Frequency response: 5 Hz - 40 kHz, ± 3 dB, 8 Ohm, both channels Rated power. | ||
+ | * Distortion factor: < 0.1 % | ||
+ | * Attenuation factor: 80 at 8 ohms | ||
+ | * Signal-to-noise ratio: | ||
+ | ** Phono MM: 75 dB | ||
+ | ** High level: 90 dB | ||
+ | * Tone control | ||
+ | Bass: ± 10 dB at 100 Hz | ||
+ | Treble: ± 10 dB at 10 kHz | ||
+ | * Loudness: + 10 dB at 100 Hz / + 3 dB at 10 kHz | ||
+ | * High Filter: - 12 dB / octave at 8 kHz | ||
+ | * Low Filter (Subsonic): - 12 dB / octave at 15 Hz | ||
+ | * Muting: 0 dB, - 15 dB | ||
+ | |||
+ | |||
+ | ''Tuner'' | ||
+ | * Reception: FM, MW | ||
+ | * Frequencies: | ||
+ | ** FM: 87 - 108 MHz | ||
+ | MW: 525 - 1'605 kHz | ||
+ | * Frequency response: 30 - 15'000 Hz, ± 0,5 dB | ||
+ | * Input sensitivity: 1.5 µV (IHF) | ||
+ | * Distortion factor: 0.3 % (mono), 0.5 % (stereo) | ||
+ | * Signal-to-noise ratio: | ||
+ | ** Mono: 70 dB | ||
+ | Stereo: 65 dB | ||
+ | * Channel separation: 47 dB | ||
+ | * Selectivity: 75 dB | ||
+ | * Co-wave selection: 1.5 dB | ||
+ | * Spurious wave selection: > 90 dB | ||
+ | * Image frequency attenuation: > 100 dB | ||
+ | * IF attenuation: > 100 dB (at 98 MHz) | ||
+ | * AM suppression: 60 dB | ||
+ | |||
+ | |||
+ | '''Special Features''' | ||
+ | * Tape dubbing | ||
+ | * Muting | ||
+ | |||
+ | |||
+ | == Remarks == | ||
+ | * Other models in the same series: | ||
+ | ** [[Rotel RX-303]] | ||
+ | ** [[Rotel RX-403]] | ||
+ | ** [[Rotel RX-503]] | ||
+ | ** [[Rotel RX-603]] | ||
+ | ** [[Rotel RX-803]] | ||
+ | ** [[Rotel RX-1203]] | ||
+ | ** [[Rotel RX-1603]] | ||
+ | |||
+ | |||
+ | == Pictures == | ||
+ | * Image: Rotel RX-803 | ||
+ | [[File:Rotel RX-803-1.jpg]] | ||
− | |||
− | + | * Extract from brochure: Rotel RX-803 | |
+ | [[File:Rotel RX-803-Prospekt-1.jpg]] | ||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | == | + | == Reports == |
− | |||
− | |||
− | |||
− | |||
== Links == | == Links == | ||
− | [[ | + | |
− | + | [[Category:Receiver]] |
Latest revision as of 07:35, 7 December 2019
Data[edit]
General
- Manufacturer: Rotel
- Model: RX-803
- Years of manufacture: 1976 - 1981
- Made in: Japan
- Color: silver, metal housing with handles
- Remote control: no
- Power consumption:
- Dimensions (WxHxD): 490 x 145 x 430 mm.
- Weight: 16 kg
- Original price approx.: 550 US-$, 1'800 DM
Connections
- Number of inputs:
- Phono MM: 2 mV, 50 kOhm
Aux: 150 mV, 50 kOhm, max. 15 V
- Tape Play 1, 2: 150 mV, 50 kOhm, max. 15 V
Main In: 1.5 V, 50 kOhm
- Antenna FM (75/300 Ohm), MW (300 Ohm).
- Number of outputs:
- Tape Rec 1, 2: 350 mV, 3.3 kOhm
- Tape Rec DIN: 120 mV, 90 kOhm
- Pre Out:
- Headphones:
- 2 pairs of speakers
Technical Specifications
Amplifier
- Continuous power (at distortion)
- 8 Ohm: 2x 80 Watt (20 Hz - 20'000 Hz)
- 4 Ohm: 2x 120 Watt (1 kHz)
- Dynamic power
- 8 Ohm:
- 4 Ohm:
- Frequency response: 5 Hz - 40 kHz, ± 3 dB, 8 Ohm, both channels Rated power.
- Distortion factor: < 0.1 %
- Attenuation factor: 80 at 8 ohms
- Signal-to-noise ratio:
- Phono MM: 75 dB
- High level: 90 dB
- Tone control
Bass: ± 10 dB at 100 Hz Treble: ± 10 dB at 10 kHz
- Loudness: + 10 dB at 100 Hz / + 3 dB at 10 kHz
- High Filter: - 12 dB / octave at 8 kHz
- Low Filter (Subsonic): - 12 dB / octave at 15 Hz
- Muting: 0 dB, - 15 dB
Tuner
- Reception: FM, MW
- Frequencies:
- FM: 87 - 108 MHz
MW: 525 - 1'605 kHz
- Frequency response: 30 - 15'000 Hz, ± 0,5 dB
- Input sensitivity: 1.5 µV (IHF)
- Distortion factor: 0.3 % (mono), 0.5 % (stereo)
- Signal-to-noise ratio:
- Mono: 70 dB
Stereo: 65 dB
- Channel separation: 47 dB
- Selectivity: 75 dB
- Co-wave selection: 1.5 dB
- Spurious wave selection: > 90 dB
- Image frequency attenuation: > 100 dB
- IF attenuation: > 100 dB (at 98 MHz)
- AM suppression: 60 dB
Special Features
- Tape dubbing
- Muting
Remarks[edit]
- Other models in the same series:
Pictures[edit]
- Image: Rotel RX-803
- Extract from brochure: Rotel RX-803