Difference between revisions of "Yamaha RX-797"
(→Daten) |
Oldfashioned (talk | contribs) m |
||
(5 intermediate revisions by 3 users not shown) | |||
Line 1: | Line 1: | ||
__NOTOC__ | __NOTOC__ | ||
− | == | + | == Data == |
− | {{ | + | {{navigation}} |
− | ''' | + | '''General''' |
− | * | + | * Manufacturer: [[Yamaha ]] |
− | * | + | * Model: RX-797 |
− | * | + | * Year of manufacture: 2006 - 2011/2012 |
− | * | + | * Made in: Made in Malaysia |
− | * | + | * Color: titanium and black |
− | * | + | * Remote control: yes |
− | * | + | * Power consumption: 260 W nominal, max 650 W |
− | * | + | * Dimensions: 435 x 151 x 389mm (W x H x D) |
− | * | + | * Weight: 10,9 kg |
− | * | + | * Original price approx.: 419 € (RRP) |
− | ''' | + | '''Connections''' |
− | * | + | * Number of inputs / outputs: |
− | ** Audio/Video (in-/outputs): 3/1 : | + | ** Audio/Video (in-/outputs): 3/1 : |
− | ** Analog Audio (in-/outputs): 3/1 | + | ** Analog Audio (in-/outputs): 3/1 |
− | ** Composite video ( | + | ** Composite video (in-/outputs): 3/1 |
− | + | Monitor outputs: 1x composite video | |
− | + | Speaker switching: A, B, A+B | |
− | + | Subwoofer output | |
− | + | Phono input | |
− | ''' | + | '''Technical Data''' |
− | '' | + | '''Amplifier''' |
− | * | + | * Minimum output power effective |
− | + | 8 Ohm: 2 x 100W, 0,019% distortion | |
− | + | 6 Ohm: 2 x 120W, 0,030% distortion | |
− | + | Maximum output power [Europe model] | |
− | ** 8 Ohm: 2 x 115W, 0 | + | ** 8 Ohm: 2 x 115W, 0.019% distortion, 1KHz, according to IEC |
− | ** 4 Ohm: 2 x 160W, 0 | + | ** 4 Ohm: 2 x 160W, 0.7% distortion, 1KHz |
− | * | + | * Dynamic power (IHF) |
** 8 Ohm: 2 x 140W | ** 8 Ohm: 2 x 140W | ||
** 6 Ohm: 2 x 170W | ** 6 Ohm: 2 x 170W | ||
** 4 Ohm: 2 x 220W | ** 4 Ohm: 2 x 220W | ||
** 2 Ohm: 2 x 290W | ** 2 Ohm: 2 x 290W | ||
− | * | + | * Total harmonic distortion: 0.012 |
− | * | + | * Attenuation factor: 240 or more (Speakers A) |
− | * | + | * Frequency response: |
− | ** CD, | + | ** CD, etc.: 20Hz - 20,000Hz ± 0.5dB |
− | + | CD Direct AMP on: 10Hz - 100,000Hz ± 1dB | |
− | * | + | * Signal-to-noise ratio: |
− | ** Phono (5mV | + | ** Phono (5mV input shorted): 87dB or more. |
− | ** CD Direct AMP ["CD" | + | ** CD Direct AMP ["CD" input] (200mV input shorted): 110dB or more |
− | ** | + | ** Stereo Channel Separation: CD, etc. (5.1KOhm input shorted, 1/10KHz): 65/50dB or more. |
− | * | + | * Tone control: |
− | ** Bass: ± 10dB, 20Hz, | + | ** Bass: ± 10dB, 20Hz, crossover frequency 350Hz. |
− | + | treble: ± 10dB, 20Khz, crossover frequency 3.5KHz | |
− | * Loudness: | + | * Loudness: attenuation 1KHz: up to -30dB. |
* High Filter: | * High Filter: | ||
− | * Low Filter (Subsonic): | + | * Low Filter (Subsonic): No |
− | * Mute: | + | * Mute: Yes, via remote control |
− | * Direct/Line-Straight: | + | * Direct/Line-Straight: Yes, on unit (Pure Direct & CD Direct AMP) |
''Tuner'' | ''Tuner'' | ||
− | * | + | * Reception: |
− | * | + | * Frequencies: |
− | ** | + | ** FM: |
− | ** | + | ** MW 530 kHz- 1611 kHz |
− | * | + | * Frequency response: 20Hz - 15,000Hz +0.5dB / -2dB |
− | * | + | * Input sensitivity: 1.0 µV (11.2dBf) |
− | * | + | * Distortion factor: 0.2% / 0.3 |
− | * | + | * Signal-to-noise ratio: 76dB (mono), 70dB (stereo) |
− | * | + | * Channel separation: 45dB at 1KHz |
− | * | + | * Selectivity: |
− | * | + | * Co-wave selection: |
− | * | + | * Spurious wave selection: |
− | * | + | * IF attenuation: |
− | * | + | * IF attenuation: |
− | * AM | + | * AM suppression: |
− | * | + | * Output level: |
− | * RDS: | + | * RDS: yes |
− | * | + | * Station memory: yes, 40 |
− | * | + | * If the signal is too bad, the tuner automatically mutes. |
− | ''' | + | '''Special Features''' |
− | * Multi | + | * Multi room function: zone 2 output, 2x IR in, 1x IR out, 1x 12V trigger out, subwoofer out, |
− | * CD | + | * CD Direct amplifier (CD Direct AMP switch) |
− | * Pure | + | * Bridging of the tone controls (Pure Direct switch) |
+ | * Separable pre- and power amplifier | ||
− | + | Accessories: Remote Control, Multiroom Remote Control, User Manual, AM/FM Antennas | |
− | == | + | == Remarks == |
− | + | A music output power of 2X 254Watts/4Ohms was measured by "Stereo" magazine. The measurement was made in impedance control position 8 Ohm, although a load of 4 Ohm was applied and thus explains the high measured value. | |
− | + | Other models in the same series: | |
* [[Yamaha RX-397|RX-397]] | * [[Yamaha RX-397|RX-397]] | ||
* [[Yamaha RX-497|RX-497]] | * [[Yamaha RX-497|RX-497]] | ||
* [[Yamaha RX-797|RX-797]] | * [[Yamaha RX-797|RX-797]] | ||
− | + | Previous model: | |
− | == | + | == Pictures == |
− | == | + | == Reports == |
== Links == | == Links == | ||
− | [[ | + | [[Category:Receiver]] |
Latest revision as of 08:23, 24 September 2017
Data[edit]
General
- Manufacturer: Yamaha
- Model: RX-797
- Year of manufacture: 2006 - 2011/2012
- Made in: Made in Malaysia
- Color: titanium and black
- Remote control: yes
- Power consumption: 260 W nominal, max 650 W
- Dimensions: 435 x 151 x 389mm (W x H x D)
- Weight: 10,9 kg
- Original price approx.: 419 € (RRP)
Connections
- Number of inputs / outputs:
- Audio/Video (in-/outputs): 3/1 :
- Analog Audio (in-/outputs): 3/1
- Composite video (in-/outputs): 3/1
Monitor outputs: 1x composite video Speaker switching: A, B, A+B Subwoofer output Phono input
Technical Data
Amplifier
- Minimum output power effective
8 Ohm: 2 x 100W, 0,019% distortion 6 Ohm: 2 x 120W, 0,030% distortion Maximum output power [Europe model]
- 8 Ohm: 2 x 115W, 0.019% distortion, 1KHz, according to IEC
- 4 Ohm: 2 x 160W, 0.7% distortion, 1KHz
- Dynamic power (IHF)
- 8 Ohm: 2 x 140W
- 6 Ohm: 2 x 170W
- 4 Ohm: 2 x 220W
- 2 Ohm: 2 x 290W
- Total harmonic distortion: 0.012
- Attenuation factor: 240 or more (Speakers A)
- Frequency response:
- CD, etc.: 20Hz - 20,000Hz ± 0.5dB
CD Direct AMP on: 10Hz - 100,000Hz ± 1dB
- Signal-to-noise ratio:
- Phono (5mV input shorted): 87dB or more.
- CD Direct AMP ["CD" input] (200mV input shorted): 110dB or more
- Stereo Channel Separation: CD, etc. (5.1KOhm input shorted, 1/10KHz): 65/50dB or more.
- Tone control:
- Bass: ± 10dB, 20Hz, crossover frequency 350Hz.
treble: ± 10dB, 20Khz, crossover frequency 3.5KHz
- Loudness: attenuation 1KHz: up to -30dB.
- High Filter:
- Low Filter (Subsonic): No
- Mute: Yes, via remote control
- Direct/Line-Straight: Yes, on unit (Pure Direct & CD Direct AMP)
Tuner
- Reception:
- Frequencies:
- FM:
- MW 530 kHz- 1611 kHz
- Frequency response: 20Hz - 15,000Hz +0.5dB / -2dB
- Input sensitivity: 1.0 µV (11.2dBf)
- Distortion factor: 0.2% / 0.3
- Signal-to-noise ratio: 76dB (mono), 70dB (stereo)
- Channel separation: 45dB at 1KHz
- Selectivity:
- Co-wave selection:
- Spurious wave selection:
- IF attenuation:
- IF attenuation:
- AM suppression:
- Output level:
- RDS: yes
- Station memory: yes, 40
- If the signal is too bad, the tuner automatically mutes.
Special Features
- Multi room function: zone 2 output, 2x IR in, 1x IR out, 1x 12V trigger out, subwoofer out,
- CD Direct amplifier (CD Direct AMP switch)
- Bridging of the tone controls (Pure Direct switch)
- Separable pre- and power amplifier
Accessories: Remote Control, Multiroom Remote Control, User Manual, AM/FM Antennas
Remarks[edit]
A music output power of 2X 254Watts/4Ohms was measured by "Stereo" magazine. The measurement was made in impedance control position 8 Ohm, although a load of 4 Ohm was applied and thus explains the high measured value.
Other models in the same series:
Previous model: