Difference between revisions of "Technics SA-GX 100"
Stefan Phan (talk | contribs) (Die Seite wurde neu angelegt: „==Technische Daten== *Eingänge für CD, Tapedecks, DVD, Phono usw. *Loundness Taste *Tape Monitor Funktion *Auto-Tuning *Digitales Quarz-Synthesizer-Empfangsteil…“) |
(korrekte Zeichen für Ω (Ohm) eingefügt) |
||
| (One intermediate revision by one other user not shown) | |||
| Line 1: | Line 1: | ||
| − | + | '''Technical Data''' | |
| − | * | + | *Amplifier |
| − | * | + | **Output power: 2 x 40 W (4 Ω). |
| − | * | + | **Total harmonic distortion at 40 Hz ~ 20 kHz: 0.5% (8 Ω). |
| − | * | + | **Power bandwidth at -3 dB: 10 Hz ~ 40 kHz (8 Ω). |
| − | * | + | **Input sensitivity and impedance. |
| − | * | + | ***Phono: 3 mV/47 kW |
| − | * | + | ***CD, VCR 1, TAPE/VCR 2: 200 mV/22 kQ. |
| − | * | + | **Maximum TA input voltage (1 kHz, rms): 150 mV |
| − | * | + | **Noise voltage spacing rated power (8 Ω). |
| − | *50/60 Hz | + | ***Phono: 70 bB (according to IHF, A: 80 dB). |
| + | ***CD, VCR 1, TAPE/VCR 2: 80 bB (according to IHF, A: 90 dB) | ||
| + | Frequency response | ||
| + | ***Phono: RIAA standard curve, ± 0.8 dB (30 Hz ~ 15 kHz) | ||
| + | ***CD, VCR 1, TAPE/VCR 2: 10 Hz ~ 40 kHz (± 3 dB) | ||
| + | **Tone control | ||
| + | Bass control: 50 Hz, + 10 dB ~ - 10 dB | ||
| + | Treble control: 20 kHz, + 10 dB ~ -10 dB | ||
| + | **Audible volume control: 50 Hz, +9 dB | ||
| + | **Output voltage VCR 1 AUDIO OUT, TAPE/VCR 2 REC OUT: 200 mV | ||
| + | **Channel deviation: (250 Hz - 6300 Hz): ±1 dB | ||
| + | Crosstalk attenuation: 55 dB | ||
| + | **Headphone level and impedance: 430 mV/330 Ω. | ||
| + | **Speaker impedance: 4 ~ 16 Ω (A or B) or 8 ~ 16 Ω (A and B). | ||
| + | FM tuner | ||
| + | **Wave band: 87 .50 ~ 1 08.00 MHz | ||
| + | Stereo switching threshold at 46 dB according to IHF: 22 µV/75 W | ||
| + | Total harmonic distortion | ||
| + | ***mono: 0.2% | ||
| + | Stereo: 0.3% | ||
| + | Signal-to-noise ratio | ||
| + | ***Mono: 60 dB (75 dB according to IHF) | ||
| + | Stereo: 58 dB (71 dB according to IHF) | ||
| + | Frequency response: 20 Hz ~ 15 kHz, + 1 dB ~ - 2 dB | ||
| + | **Separation sharpness at interfering transmitter: 65 dB | ||
| + | **capture ratio: 1.0 dB | ||
| + | **Mirror frequency attenuation at 98 MHz: 40 dB | ||
| + | IF attenuation at 98 MHz: 70 dB | ||
| + | **Response attenuation on spurious frequencies at 98 MHz: 70 dB | ||
| + | **MW suppression: 50 dB | ||
| + | **Cross-talk attenuation 1 kHz: 40 dB | ||
| + | **carrier residual | ||
| + | ***19 kHz: -55 dB (-60 dB according to IHF) | ||
| + | ***38 kHz: -50 dB (-55 dB according to IHF) | ||
| + | **Channel deviation (250 Hz ~ 6300 Hz): ± 1.5 dB | ||
| + | limiter insert: 1.2 µV | ||
| + | **Bandwidth | ||
| + | ***ZF amplifier: 180 kHz | ||
| + | ***F-demodulator: 1000 kHz | ||
| + | **Antenna connection: 75 W (unbalanced) | ||
| + | *MW tuner | ||
| + | **Wavebands: | ||
| + | ***522 kHz ~ 1611 kHz (9 kHz steps). | ||
| + | ***530 kHz ~ 1620 kHz (10-kHz steps) | ||
| + | **Input sensitivity (S/R 20 dB): 20 µV, 330 µV/m | ||
| + | **Separation sharpness (at 999 kHz): 55 dB | ||
| + | **Mirror frequency attenuation (at 999 kHz): 40 dB | ||
| + | IF attenuation (at 999 kHz): 55 dB | ||
| + | *General | ||
| + | Power consumption: 265 W | ||
| + | Mains voltage: 220 V alternating current 50 / 60 Hz | ||
| + | Dimensions in mm: W.430 - H.124 - D.300 | ||
| + | Weight: approx. 5.5 kg | ||
| − | == | + | == Remarks == |
| − | + | Other models of the same series: | |
| − | == | + | == Pictures == |
| − | [[ | + | [[File:Technics SA-GX100.jpg]] |
| − | == | + | == Reviews == |
== Links == | == Links == | ||
| − | [[ | + | [[Category:Receiver]] |
__NOTOC__ | __NOTOC__ | ||
Latest revision as of 14:11, 23 February 2014
Technical Data
- Amplifier
- Output power: 2 x 40 W (4 Ω).
- Total harmonic distortion at 40 Hz ~ 20 kHz: 0.5% (8 Ω).
- Power bandwidth at -3 dB: 10 Hz ~ 40 kHz (8 Ω).
- Input sensitivity and impedance.
- Phono: 3 mV/47 kW
- CD, VCR 1, TAPE/VCR 2: 200 mV/22 kQ.
- Maximum TA input voltage (1 kHz, rms): 150 mV
- Noise voltage spacing rated power (8 Ω).
- Phono: 70 bB (according to IHF, A: 80 dB).
- CD, VCR 1, TAPE/VCR 2: 80 bB (according to IHF, A: 90 dB)
Frequency response
- Phono: RIAA standard curve, ± 0.8 dB (30 Hz ~ 15 kHz)
- CD, VCR 1, TAPE/VCR 2: 10 Hz ~ 40 kHz (± 3 dB)
- Tone control
Bass control: 50 Hz, + 10 dB ~ - 10 dB Treble control: 20 kHz, + 10 dB ~ -10 dB
- Audible volume control: 50 Hz, +9 dB
- Output voltage VCR 1 AUDIO OUT, TAPE/VCR 2 REC OUT: 200 mV
- Channel deviation: (250 Hz - 6300 Hz): ±1 dB
Crosstalk attenuation: 55 dB
- Headphone level and impedance: 430 mV/330 Ω.
- Speaker impedance: 4 ~ 16 Ω (A or B) or 8 ~ 16 Ω (A and B).
FM tuner
- Wave band: 87 .50 ~ 1 08.00 MHz
Stereo switching threshold at 46 dB according to IHF: 22 µV/75 W Total harmonic distortion
- mono: 0.2%
Stereo: 0.3% Signal-to-noise ratio
- Mono: 60 dB (75 dB according to IHF)
Stereo: 58 dB (71 dB according to IHF) Frequency response: 20 Hz ~ 15 kHz, + 1 dB ~ - 2 dB
- Separation sharpness at interfering transmitter: 65 dB
- capture ratio: 1.0 dB
- Mirror frequency attenuation at 98 MHz: 40 dB
IF attenuation at 98 MHz: 70 dB
- Response attenuation on spurious frequencies at 98 MHz: 70 dB
- MW suppression: 50 dB
- Cross-talk attenuation 1 kHz: 40 dB
- carrier residual
- 19 kHz: -55 dB (-60 dB according to IHF)
- 38 kHz: -50 dB (-55 dB according to IHF)
- Channel deviation (250 Hz ~ 6300 Hz): ± 1.5 dB
limiter insert: 1.2 µV
- Bandwidth
- ZF amplifier: 180 kHz
- F-demodulator: 1000 kHz
- Antenna connection: 75 W (unbalanced)
- Bandwidth
- MW tuner
- Wavebands:
- 522 kHz ~ 1611 kHz (9 kHz steps).
- 530 kHz ~ 1620 kHz (10-kHz steps)
- Input sensitivity (S/R 20 dB): 20 µV, 330 µV/m
- Separation sharpness (at 999 kHz): 55 dB
- Mirror frequency attenuation (at 999 kHz): 40 dB
- Wavebands:
IF attenuation (at 999 kHz): 55 dB
- General
Power consumption: 265 W Mains voltage: 220 V alternating current 50 / 60 Hz Dimensions in mm: W.430 - H.124 - D.300 Weight: approx. 5.5 kg
Remarks
Other models of the same series:
Pictures
