Difference between revisions of "Denon PMA-500 V"
(→Bilder) |
|||
| (14 intermediate revisions by 7 users not shown) | |||
| Line 1: | Line 1: | ||
__NOTOC__ | __NOTOC__ | ||
| − | == | + | == Data == |
| − | {{ | + | {{navigation}} |
| − | ''' | + | '''General''' |
| − | * | + | * Manufacturer: [[Denon]] |
| − | * | + | * Model: PMA 500 V |
| − | * | + | * Type: Integrated amplifier |
| − | * | + | * Years of manufacture: 1986 - 1988 |
| − | * | + | * Made in: Japan |
| − | + | * Colours: Black, Silver | |
| − | * | + | * Remote control: none |
| − | * | + | * Power consumption: 190 W |
| − | * | + | * Dimensions: 434 x 137 x 385 mm (WxHxD) |
| − | * | + | * Weight: 9.7 kg |
| − | * | + | * Original price approx.: 698 DM |
| − | ''' | + | '''Connections''' |
| − | * | + | * Number of inputs: 7 |
** Phono: | ** Phono: | ||
| − | *** MM 2 | + | *** MM 2.5 mV, 47 kOhm |
*** MC 200 µV, 100 Ohm | *** MC 200 µV, 100 Ohm | ||
| − | + | CD, Aux1, Aux2, Tuner, Tape1, Tape2: 150 mV, 30 kOhm | |
| − | * | + | * Number of outputs: 3 |
** Tape1, Tape2: 150 mV | ** Tape1, Tape2: 150 mV | ||
| + | ** Pre-Out | ||
| − | ''' | + | '''Technical Data''' |
| − | * | + | * Continuous power |
| − | ** 8 Ohm: 2x 80 W ( | + | ** 8 Ohm: 2x 80 W (< 0.05%, 10Hz - 20kHz) |
** 4 Ohm: 2x 130 W (1%, 1 kHz, DIN) | ** 4 Ohm: 2x 130 W (1%, 1 kHz, DIN) | ||
| − | * | + | * Total harmonic distortion: |
| − | ** 0 | + | ** 0.007% (20Hz - 20kHz, at -3dB nominal power at 8Ohms). |
| − | ** 0 | + | ** 0.003% 1kHz (at rated output power into 8 ohms). |
| − | * | + | * Attenuation factor: |
| − | * | + | * Power bandwidth: 5 Hz-80 kHz (8 ohms, 0.1% THD). |
| − | * | + | * Frequency response:4 Hz-150 kHz (+0 dB, -3 dB,1 W) |
| − | * | + | * Output impedance: 0.1 ohms (1 kHz) |
| − | * | + | * Signal-to-noise ratio: |
** Phono: | ** Phono: | ||
| − | *** MM: 88 dB ( | + | *** MM: 88 dB (input terminals shorted for 5mV). |
| − | + | MC: 68 dB (input terminals shorted for 500µV) | |
| − | + | CD, Aux, Tuner, Tape: 105 dB (input terminals shorted) | |
| − | * | + | * Stereo channel separation: |
| − | * | + | * Tone control: |
** Bass: %plusmn;10 dB (100 Hz) | ** Bass: %plusmn;10 dB (100 Hz) | ||
| − | + | Treble: %plusmn;10 dB (10 kHz) | |
* Loudness: +7 dB (100 Hz), +6dB (10 kHz) | * Loudness: +7 dB (100 Hz), +6dB (10 kHz) | ||
* Subsonic: 16 kHz, 12 dB/oct | * Subsonic: 16 kHz, 12 dB/oct | ||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | + | '''Special Features''' | |
| − | + | * The AUX inputs can additionally switch a video signal (2x video composite in to 1x video composite out) | |
| + | * Mono switch (not used for bridging but only for checking the loudspeaker phase position) | ||
| + | * 8 speaker outputs (4x A, 4x B, A+B) | ||
| + | * Separate pre and power amplifier | ||
| − | == | + | |
| + | == Remarks == | ||
| + | * Other models of the same series: | ||
| + | * [[Denon PMA-300 V]] | ||
| + | * [[Denon PMA-500 V]] | ||
| + | * [[Denon PMA-700 V]] | ||
| + | * [[Denon PMA-900 V]] | ||
| + | |||
| + | |||
| + | == Pictures == | ||
| + | * Picture: Denon PMA-500 V | ||
| + | http://audio-database.com/DENON-COLUMBIA/amp/pma-500v.JPG | ||
| + | |||
| + | |||
| + | * Picture: Denon PMA-500 V | ||
http://www.avx.hu/forum/uploads/post-32-1248110895.jpg | http://www.avx.hu/forum/uploads/post-32-1248110895.jpg | ||
| − | |||
| − | == | + | |
| + | == Reports == | ||
| + | |||
== Links == | == Links == | ||
| − | [[ | + | |
| + | [[Category:Integrated amplifier]] | ||
Latest revision as of 07:56, 25 September 2020
Data[edit]
General
- Manufacturer: Denon
- Model: PMA 500 V
- Type: Integrated amplifier
- Years of manufacture: 1986 - 1988
- Made in: Japan
- Colours: Black, Silver
- Remote control: none
- Power consumption: 190 W
- Dimensions: 434 x 137 x 385 mm (WxHxD)
- Weight: 9.7 kg
- Original price approx.: 698 DM
Connections
- Number of inputs: 7
- Phono:
- MM 2.5 mV, 47 kOhm
- MC 200 µV, 100 Ohm
- Phono:
CD, Aux1, Aux2, Tuner, Tape1, Tape2: 150 mV, 30 kOhm
- Number of outputs: 3
- Tape1, Tape2: 150 mV
- Pre-Out
Technical Data
- Continuous power
- 8 Ohm: 2x 80 W (< 0.05%, 10Hz - 20kHz)
- 4 Ohm: 2x 130 W (1%, 1 kHz, DIN)
- Total harmonic distortion:
- 0.007% (20Hz - 20kHz, at -3dB nominal power at 8Ohms).
- 0.003% 1kHz (at rated output power into 8 ohms).
- Attenuation factor:
- Power bandwidth: 5 Hz-80 kHz (8 ohms, 0.1% THD).
- Frequency response:4 Hz-150 kHz (+0 dB, -3 dB,1 W)
- Output impedance: 0.1 ohms (1 kHz)
- Signal-to-noise ratio:
- Phono:
- MM: 88 dB (input terminals shorted for 5mV).
- Phono:
MC: 68 dB (input terminals shorted for 500µV) CD, Aux, Tuner, Tape: 105 dB (input terminals shorted)
- Stereo channel separation:
- Tone control:
- Bass: %plusmn;10 dB (100 Hz)
Treble: %plusmn;10 dB (10 kHz)
- Loudness: +7 dB (100 Hz), +6dB (10 kHz)
- Subsonic: 16 kHz, 12 dB/oct
Special Features
- The AUX inputs can additionally switch a video signal (2x video composite in to 1x video composite out)
- Mono switch (not used for bridging but only for checking the loudspeaker phase position)
- 8 speaker outputs (4x A, 4x B, A+B)
- Separate pre and power amplifier
Remarks[edit]
- Other models of the same series:
- Denon PMA-300 V
- Denon PMA-500 V
- Denon PMA-700 V
- Denon PMA-900 V
Pictures[edit]
- Picture: Denon PMA-500 V
- Picture: Denon PMA-500 V
