Difference between revisions of "Sony XL-MC 3"
| (2 intermediate revisions by 2 users not shown) | |||
| Line 1: | Line 1: | ||
| − | + | __NOTOC__ | |
| + | == Data == | ||
| + | {{navigation}} | ||
| + | '''General''' | ||
| + | * Manufacturer: [[Sony]] | ||
| + | * Model: XL-MC 3 | ||
| + | * Years of manufacture: 1980-85 | ||
| + | * Made in: Japan | ||
| + | * Color: Silver | ||
| + | * Weight: 3.0g | ||
| + | * Original price approx.: 265, - DM (UVP) | ||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | + | '''Technical Data''' | |
| − | + | * Principle: Moving Coil | |
| − | + | * Frequency response: 10-50,000 Hz | |
| − | + | * Channel separation: > 30 dB (1 kHz) | |
| − | + | * Channel balance: < 1.0 dB (1 kHz) | |
| − | + | * Crosstalk attenuation: better than 30 dB | |
| − | + | * Output voltage: 0.25 mV (1 kHz, 5 cm/sec, 45 degrees) | |
| − | + | * Terminating resistance: | |
| − | + | * Inductance: 40 Ω (1 kHz). | |
| − | + | * Needle type: NDMC 1E, double elliptical. | |
| + | * Recommended tracking force: 1.5 g (1.2 - 1.8 g). | ||
| + | * Needle compliance: 20*10-6 cm/dyn. | ||
| + | |||
| + | |||
| + | '''Special equipment''' | ||
| + | * here, if available | ||
| + | |||
| + | |||
| + | == Remarks == | ||
| + | Other models in the same series: | ||
| + | * [[Sony XL-MC 1|XL-MC 1]] | ||
| + | * [[Sony XL-MC 2|XL-MC 2]] | ||
| + | * [[Sony XL-MC 3|XL-MC 3]] | ||
| + | * [[Sony XL-MC 10|XL-MC 10]] | ||
| + | |||
| + | == Pictures == | ||
| + | |||
| + | == Reports == | ||
| + | |||
| + | == Links == | ||
| + | |||
| + | [[Category:Pickups]] | ||
Latest revision as of 15:26, 7 December 2010
Data[edit]
General
- Manufacturer: Sony
- Model: XL-MC 3
- Years of manufacture: 1980-85
- Made in: Japan
- Color: Silver
- Weight: 3.0g
- Original price approx.: 265, - DM (UVP)
Technical Data
- Principle: Moving Coil
- Frequency response: 10-50,000 Hz
- Channel separation: > 30 dB (1 kHz)
- Channel balance: < 1.0 dB (1 kHz)
- Crosstalk attenuation: better than 30 dB
- Output voltage: 0.25 mV (1 kHz, 5 cm/sec, 45 degrees)
- Terminating resistance:
- Inductance: 40 Ω (1 kHz).
- Needle type: NDMC 1E, double elliptical.
- Recommended tracking force: 1.5 g (1.2 - 1.8 g).
- Needle compliance: 20*10-6 cm/dyn.
Special equipment
- here, if available
Remarks[edit]
Other models in the same series: