Difference between revisions of "Sony XL-MC 2"
| (One intermediate revision by one other user not shown) | |||
| Line 1: | Line 1: | ||
| − | + | == General == | |
| − | + | Manufacturer: [[Sony]] | |
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | + | Model: XL-MC 2 | |
| − | + | Years of manufacture: 1980-85 | |
| − | + | ||
| − | + | Made in: Japan | |
| − | + | ||
| − | + | Colour: Silver | |
| − | + | ||
| − | + | Weight: 3.0g | |
| − | + | ||
| − | + | Original price approx.: 230 USD | |
| − | + | ||
| + | |||
| + | == Technical data == | ||
| + | |||
| + | Principle: Moving Coil | ||
| + | |||
| + | Frequency response: 10-45,000 Hz | ||
| + | |||
| + | Channel separation: > 30 dB (1 kHz) | ||
| + | |||
| + | Channel balance: < 1.5 dB (1 kHz) | ||
| + | |||
| + | Crosstalk attenuation: better than 30 db | ||
| + | |||
| + | Output voltage: 0.2 mV (1 kHz, 5 cm/sec, 45 degrees) | ||
| + | |||
| + | Induction: 40 Ω (1 kHz) | ||
| + | |||
| + | Needle type: NDMC 1E, elliptical | ||
| + | |||
| + | Recommended tracking force: 1.5 g (1.2 - 1.8 g) | ||
| + | |||
| + | Needle compliance: 20*10-6 cm/dyn | ||
| + | |||
| + | [[Category:Turntables]] | ||
Latest revision as of 10:33, 9 November 2010
General[edit]
Manufacturer: Sony
Model: XL-MC 2
Years of manufacture: 1980-85
Made in: Japan
Colour: Silver
Weight: 3.0g
Original price approx.: 230 USD
Technical data[edit]
Principle: Moving Coil
Frequency response: 10-45,000 Hz
Channel separation: > 30 dB (1 kHz)
Channel balance: < 1.5 dB (1 kHz)
Crosstalk attenuation: better than 30 db
Output voltage: 0.2 mV (1 kHz, 5 cm/sec, 45 degrees)
Induction: 40 Ω (1 kHz)
Needle type: NDMC 1E, elliptical
Recommended tracking force: 1.5 g (1.2 - 1.8 g)
Needle compliance: 20*10-6 cm/dyn