Difference between revisions of "Yamaha MC-9"
m |
Analoghatwas (talk | contribs) (→Bemerkungen: Lt Yamaha-Katalog 1984.) |
||
| (15 intermediate revisions by 7 users not shown) | |||
| Line 1: | Line 1: | ||
__NOTOC__ | __NOTOC__ | ||
| − | == | + | == Data == |
| − | {{ | + | {{navigation}} |
| − | ''' | + | '''General''' |
| − | * | + | * Manufacturer: [[Yamaha]] |
| − | * | + | * Model: MC-9 |
| − | * | + | * Years of manufacture: 1980 - 1997 |
| − | * | + | * Manufactured in: |
| − | * | + | * Color: black |
| − | * | + | * Weight: 5.3 g |
| − | * | + | * Original price approx.: 200 DM |
| − | ''' | + | '''Technical Data''' |
| − | * | + | * Transducer principle: cross matrix, moving coils (MC = Moving Coil) |
| − | * | + | * Needle carrier: aluminium tubes, conical to the tip |
| − | * | + | * Needle type: 0.1 x 0.2 mm rectangular solid diamond needle with elliptical tip (8 x 20 µm) |
| − | * | + | * Suspension: Single point suspension |
| − | * | + | * Damper: equalization damper for V-H compliance adjustment |
| − | * | + | * Housing: monoblock connectors potted in high-density special plastic |
| − | * | + | * Frequency response: 10 - 20'000 Hz, cut-off frequency 50 kHz |
| − | * | + | * Channel separation: > 28 dB |
| − | * | + | * Channel balance: < 1 dB |
| − | * | + | * Crosstalk attenuation: |
| + | * Output voltage: 0.3 mV (at 1 kHz, 5 cm/s, 45° peak). | ||
| + | * Terminating resistor: 30 Ohm effective resistance | ||
| + | * Induction: | ||
| + | * Recommended tracking force: 1.5 ± 0.3 g (At 20 - 25 °C. Adjust to 1.8 g if room temperature is less than 20 °C). | ||
| + | * Vertical tracking angle: 20 ± 2°. | ||
| + | * Needle compliance: dynamic: 11 x 10-6 cm/dyme (horizontal), 9 x 10-6 cm/dyme (vertical) and static: 21 x 10-6 cm/dyme (both at 100 Hz, 25 °C). | ||
| + | System connections: | ||
| + | ** white signal line: L+ | ||
| + | ** blue signal line: L- | ||
| + | ** red signal line: R+ | ||
| + | ** green signal line: R- | ||
| − | + | == Remarks == | |
| − | * | + | * The output voltage of the MC-9 is only 0.3 mV, i.e. about 1 tenth of the voltage generated by a magnetic system (MM = Moving Magnet). If the amplifier does not have a built-in MC preamplifier (MC phono input), one must use an intermediate amplifier (so-called matching transformer) - also called phono preamplifier, turntable preamplifier, phono equalizer preamplifier - for MC systems. |
| − | |||
| − | |||
| − | == | + | * Other models in the same series: |
| + | * [[Yamaha MC-1s]] | ||
| + | * [[Yamaha MC-1x]] | ||
| + | * [[Yamaha MC-3]] | ||
| + | * [[Yamaha MC-5]] | ||
| + | * [[Yamaha MC-7]] | ||
| + | * [[Yamaha MC-9]] | ||
| + | * [[Yamaha MC-11]] | ||
| + | |||
| + | == Pictures == | ||
| + | * Image: Yamaha MC-9 | ||
| + | [[File:YAMAHA MC 9.jpg]] | ||
| + | |||
| + | |||
| + | == Reports == | ||
| − | |||
== Links == | == Links == | ||
| − | [[ | + | |
| + | [[Category:Pickups]] | ||
Latest revision as of 10:45, 2 August 2020
Data[edit]
General
- Manufacturer: Yamaha
- Model: MC-9
- Years of manufacture: 1980 - 1997
- Manufactured in:
- Color: black
- Weight: 5.3 g
- Original price approx.: 200 DM
Technical Data
- Transducer principle: cross matrix, moving coils (MC = Moving Coil)
- Needle carrier: aluminium tubes, conical to the tip
- Needle type: 0.1 x 0.2 mm rectangular solid diamond needle with elliptical tip (8 x 20 µm)
- Suspension: Single point suspension
- Damper: equalization damper for V-H compliance adjustment
- Housing: monoblock connectors potted in high-density special plastic
- Frequency response: 10 - 20'000 Hz, cut-off frequency 50 kHz
- Channel separation: > 28 dB
- Channel balance: < 1 dB
- Crosstalk attenuation:
- Output voltage: 0.3 mV (at 1 kHz, 5 cm/s, 45° peak).
- Terminating resistor: 30 Ohm effective resistance
- Induction:
- Recommended tracking force: 1.5 ± 0.3 g (At 20 - 25 °C. Adjust to 1.8 g if room temperature is less than 20 °C).
- Vertical tracking angle: 20 ± 2°.
- Needle compliance: dynamic: 11 x 10-6 cm/dyme (horizontal), 9 x 10-6 cm/dyme (vertical) and static: 21 x 10-6 cm/dyme (both at 100 Hz, 25 °C).
System connections:
- white signal line: L+
- blue signal line: L-
- red signal line: R+
- green signal line: R-
Remarks[edit]
- The output voltage of the MC-9 is only 0.3 mV, i.e. about 1 tenth of the voltage generated by a magnetic system (MM = Moving Magnet). If the amplifier does not have a built-in MC preamplifier (MC phono input), one must use an intermediate amplifier (so-called matching transformer) - also called phono preamplifier, turntable preamplifier, phono equalizer preamplifier - for MC systems.
- Other models in the same series:
- Yamaha MC-1s
- Yamaha MC-1x
- Yamaha MC-3
- Yamaha MC-5
- Yamaha MC-7
- Yamaha MC-9
- Yamaha MC-11
Pictures[edit]
- Image: Yamaha MC-9
