Difference between revisions of "Sansui AU-D 33"
| (19 intermediate revisions by 6 users not shown) | |||
| Line 1: | Line 1: | ||
| − | Sansui- | + | __NOTOC__ |
| + | == Data == | ||
| + | {{navigation}} | ||
| + | '''General''' | ||
| + | * Manufacturer: [[Sansui]] | ||
| + | * Model: AU-D 33 | ||
| + | * Type: Integrated amplifier | ||
| + | * Years of manufacture: 1981 - 1984 | ||
| + | * Color: Black or silver | ||
| + | * Remote control: | ||
| + | * Power consumption: 210 watts | ||
| + | * Dimensions: 430 x 112 x 334 mm (WxHxD) | ||
| + | * Weight: 7.3 kg | ||
| + | * Original price approx.: 800 DM | ||
| − | |||
| − | + | '''Connections''' | |
| + | * Number of inputs: 5 (Cinch) | ||
| + | Phono | ||
| + | ** Tuner | ||
| + | Aux | ||
| + | 2x Tape | ||
| + | * Number of outputs: 2 | ||
| + | ** Headphones (6,3mm jack) | ||
| + | ** (2 x loudspeaker) | ||
| + | |||
| + | |||
| + | '''Technical data''' | ||
| + | * Sine power: 2 x 50 watts at 8 ohms | ||
| + | * Total harmonic distortion: 0.004% at RMS rated power | ||
| + | * cross distortion factor: 0,006% | ||
| + | * Power bandwidth: 0-300,000 Hz ±0dB, -3dB | ||
| + | * Attenuation factor: 40 | ||
| + | * Input sensitivity | ||
| + | ** Phono MC: 250 uV / 100 Ohm | ||
| + | ** Phone MM: 2.5 mV / 47 kOhm | ||
| + | ** Tuner, AUX, Tape: 200 mV / 47 kOhm | ||
| + | ** Tape Rec.: 200 mV / 47 kOhm | ||
| + | * Output (level/impedance): | ||
| + | * Frequency response: 0-300,000 Hz ±0dB, -3dB. | ||
| + | * Tone control: | ||
| + | ** Bass: ± 10 dB / 50 Hz | ||
| + | Treble: ± 10 dB / 10 kHz | ||
| + | ** Selective tone control: | ||
| + | * Loudness: +8 dB / 100 Hz, +5dB / 10 kHz. | ||
| + | * Subsonic: | ||
| + | * Direct/Line-Straight: yes | ||
| + | * Ripple spacing (shorted): | ||
| + | * Stereo channel separation: 90 dB, Phono-MM 72 dB. | ||
| + | * Signal-to-noise ratio: | ||
| + | ** Phono-MC: 65 dB | ||
| + | ** Phono-MM: 84 dB | ||
| + | ** Rest: 105 dB | ||
| + | |||
| + | |||
| + | '''Special Features''' | ||
| + | * 2 switched outlets for further devices on the rear panel | ||
| + | |||
| + | |||
| + | == Remarks == | ||
| + | * Sansui mid-range model of the early 1980s (1981-84). Provides two times 50 watts of output power into 8 ohms. Few distortions thanks to Sansui's Super Feedforward system. Input source selectable by push-switch, LEDs indicate active input source. In the UK often sold as a set with [[KEF Coda III]] speakers. | ||
| + | AU-D33 was one of the best amplifiers from Sansui and from the market in that period. | ||
| + | |||
| + | |||
| + | * Other models in the same series: | ||
| + | * [[Sansui AU-D 22]] | ||
| + | * [[Sansui AU-D 33]] | ||
| + | |||
| + | |||
| + | * Corresponding tuner: | ||
| + | * [[Sansui TU-S 33]] | ||
| + | |||
| + | |||
| + | == Pictures == | ||
| + | * Extract from brochure: Sansui AU-D 22, AU-D 33, TU-S 33 | ||
| + | [[File:Sansui AU-D-22-33-TU-S-33-Prospekt-1.jpg]] | ||
| + | |||
| + | |||
| + | == Reports == | ||
| + | * Stereoplay 04/1982: "Top class IV", best integrated amplifier in the time at Stereoplay "Top class I". | ||
| + | |||
| + | |||
| + | == Links == | ||
| + | |||
| + | |||
| + | [[Category:Integrated amplifier]] | ||
Latest revision as of 00:31, 10 July 2019
Data[edit]
General
- Manufacturer: Sansui
- Model: AU-D 33
- Type: Integrated amplifier
- Years of manufacture: 1981 - 1984
- Color: Black or silver
- Remote control:
- Power consumption: 210 watts
- Dimensions: 430 x 112 x 334 mm (WxHxD)
- Weight: 7.3 kg
- Original price approx.: 800 DM
Connections
- Number of inputs: 5 (Cinch)
Phono
- Tuner
Aux 2x Tape
- Number of outputs: 2
- Headphones (6,3mm jack)
- (2 x loudspeaker)
Technical data
- Sine power: 2 x 50 watts at 8 ohms
- Total harmonic distortion: 0.004% at RMS rated power
- cross distortion factor: 0,006%
- Power bandwidth: 0-300,000 Hz ±0dB, -3dB
- Attenuation factor: 40
- Input sensitivity
- Phono MC: 250 uV / 100 Ohm
- Phone MM: 2.5 mV / 47 kOhm
- Tuner, AUX, Tape: 200 mV / 47 kOhm
- Tape Rec.: 200 mV / 47 kOhm
- Output (level/impedance):
- Frequency response: 0-300,000 Hz ±0dB, -3dB.
- Tone control:
- Bass: ± 10 dB / 50 Hz
Treble: ± 10 dB / 10 kHz
- Selective tone control:
- Loudness: +8 dB / 100 Hz, +5dB / 10 kHz.
- Subsonic:
- Direct/Line-Straight: yes
- Ripple spacing (shorted):
- Stereo channel separation: 90 dB, Phono-MM 72 dB.
- Signal-to-noise ratio:
- Phono-MC: 65 dB
- Phono-MM: 84 dB
- Rest: 105 dB
Special Features
- 2 switched outlets for further devices on the rear panel
Remarks[edit]
- Sansui mid-range model of the early 1980s (1981-84). Provides two times 50 watts of output power into 8 ohms. Few distortions thanks to Sansui's Super Feedforward system. Input source selectable by push-switch, LEDs indicate active input source. In the UK often sold as a set with KEF Coda III speakers.
AU-D33 was one of the best amplifiers from Sansui and from the market in that period.
- Other models in the same series:
- Sansui AU-D 22
- Sansui AU-D 33
- Corresponding tuner:
- Sansui TU-S 33
Pictures[edit]
- Extract from brochure: Sansui AU-D 22, AU-D 33, TU-S 33
Reports[edit]
- Stereoplay 04/1982: "Top class IV", best integrated amplifier in the time at Stereoplay "Top class I".