Difference between revisions of "RAUCH DVT 50S"
(→Daten) |
(→Testberichte) |
||
| (3 intermediate revisions by the same user not shown) | |||
| Line 1: | Line 1: | ||
| − | == | + | == Short description == |
| − | + | Professional, very stable studio stereo power amplifier, which can also operate low impedances. | |
''"Rauch's DVT 50S combines unprecedented audio performance and reliability with advanced, cogent and road-proof functions and facilitites, as prescribed by everyday, real-live, pro-audio applications across the world."'' | ''"Rauch's DVT 50S combines unprecedented audio performance and reliability with advanced, cogent and road-proof functions and facilitites, as prescribed by everyday, real-live, pro-audio applications across the world."'' | ||
| − | == | + | == Data == |
| − | ''' | + | '''General''' |
| − | * | + | * Manufacturer:[[RAUCH]] |
| − | * | + | * Model: DVT 50S |
| − | * | + | * Year of manufacture: ca. 1988 |
| − | * | + | * Manufactured in: England |
| − | * | + | * Colour: silver-grey |
| − | * | + | * Dimensions (W/H/D): 483/84/372 mm |
| − | * | + | * Weight: approx. 12kg |
| − | * | + | * New price approx.: CHF 2200.- |
| − | ''' | + | '''Connections''' |
| − | * 2x XLR | + | * 2x XLR high level input |
| − | + | 2x XLR high level output | |
| − | + | 2x loudspeaker output | |
| − | + | 2x XLR speaker output | |
| − | ''' | + | '''Technical Data''' |
| − | * RMS | + | * RMS output power 20Hz - 20kHz: |
| − | * min. 140W | + | * min. 140W at 8 Ohm |
| − | * min. 205W | + | * min. 205W at 4 Ohm |
| − | * min. 430W | + | * min. 430W at 8 Ohm mono operation |
| − | * | + | * Frequency range (at -0.1dB): 25 Hz - 25kHz |
| − | * | + | * input sensitivity: 865mV for nominal power at 4 Ohm |
| − | * | + | * Input impedance: 25kOhm |
* Common Mode Rejection: min. -50dB, typ. -80dB | * Common Mode Rejection: min. -50dB, typ. -80dB | ||
| − | * | + | * Distortion factor (T.H.D.): min. 0.09%, typ. 0.008% |
| − | + | Noise (S.N.R 22Hz - 22kHz): min. -99dB, typ. -112dB | |
| − | * | + | * Rise time (at 4Ohm): min. 0.5uS, typ. 0.35uS |
| − | + | slew rate: min. 100V/uS, typ. 150V/uS | |
| − | * | + | * Output current (noise at full load and 4ohm): min. 6.6A, typ. 3.3A |
| − | * | + | * Output current (live and connected P.A.): min. 19.8A, typ. 9.9A |
| − | ''' | + | '''Special Features''' |
| − | * | + | * Features balanced inputs. |
| − | * | + | * Can be used in bridge circuit as a mono power amplifier. |
| − | * | + | * Features extensive protection circuits (DC, RF, overload, short circuit). |
| − | * | + | * Integrated is a "limiting indicator", which warns of actual clipping. |
| − | == | + | == Remarks == |
| − | + | Other models of the same series: | |
| − | + | There was a whole series of this series, which are equipped without fan. Starting with 50W nominal power (1" high), the second smallest model - the DVT 50S - with 100W nominal power (2" high), and the bigger brother with 250W nominal power (3" high). | |
| − | + | In addition, there was a series with fans, which had higher power for the same size. The flagship was a power amplifier with 500W nominal power at 8 ohms, which easily delivered 1000W at 4 ohms. In mono mode this power wonder delivered more than 4000W at 4 ohms! However, power amps with fans are not suitable for home use because of the noise. | |
| − | == | + | == Pictures == |
| − | [[ | + | [[Picture:Rauch DVT 50S prospect.jpg]] |
| − | [[ | + | [[Picture:Rauch DVT 50S front.jpg]] |
| − | [[ | + | [[Image:Rauch DVT 50S top.jpg]] |
| − | [[ | + | [[Image:Rauch DVT 50S side.jpg]] |
| − | [[ | + | [[Image:Rauch DVT 50S back.jpg]] |
| − | == | + | == Reviews == |
| + | * This unit has provided its service to me for over 20 years in a flawless manner. The purchase of it was a real stroke of luck. A good friend with his own recording studio was working part time in a professional music store. This ended the general agency for "Rauch" in Switzerland and liquidated all devices (The Rauch devices were much too good and too noble for professional use). He recommended the Rauch to me because he had had the best experience with them in the studio. Since then I am the proud owner of a DVT 50S and enjoy it every day. The sound can easily compete with any "high-end" power amplifier in the same price range. Especially the power reserves and the high damping factor are convincing. These power amps are so carefully and well manufactured that they are destined for eternity. | ||
| + | March 2010 / T. H. / Switzerland | ||
== Links == | == Links == | ||
| − | [[ | + | [[Category:Example category 1]] |
| − | [[ | + | [[Category:Draft]] |
__NOTOC__ | __NOTOC__ | ||
Latest revision as of 15:14, 29 March 2010
Short description[edit]
Professional, very stable studio stereo power amplifier, which can also operate low impedances. "Rauch's DVT 50S combines unprecedented audio performance and reliability with advanced, cogent and road-proof functions and facilitites, as prescribed by everyday, real-live, pro-audio applications across the world."
Data[edit]
General
- Manufacturer:RAUCH
- Model: DVT 50S
- Year of manufacture: ca. 1988
- Manufactured in: England
- Colour: silver-grey
- Dimensions (W/H/D): 483/84/372 mm
- Weight: approx. 12kg
- New price approx.: CHF 2200.-
Connections
- 2x XLR high level input
2x XLR high level output 2x loudspeaker output 2x XLR speaker output
Technical Data
- RMS output power 20Hz - 20kHz:
- min. 140W at 8 Ohm
- min. 205W at 4 Ohm
- min. 430W at 8 Ohm mono operation
- Frequency range (at -0.1dB): 25 Hz - 25kHz
- input sensitivity: 865mV for nominal power at 4 Ohm
- Input impedance: 25kOhm
- Common Mode Rejection: min. -50dB, typ. -80dB
- Distortion factor (T.H.D.): min. 0.09%, typ. 0.008%
Noise (S.N.R 22Hz - 22kHz): min. -99dB, typ. -112dB
- Rise time (at 4Ohm): min. 0.5uS, typ. 0.35uS
slew rate: min. 100V/uS, typ. 150V/uS
- Output current (noise at full load and 4ohm): min. 6.6A, typ. 3.3A
- Output current (live and connected P.A.): min. 19.8A, typ. 9.9A
Special Features
- Features balanced inputs.
- Can be used in bridge circuit as a mono power amplifier.
- Features extensive protection circuits (DC, RF, overload, short circuit).
- Integrated is a "limiting indicator", which warns of actual clipping.
Remarks[edit]
Other models of the same series: There was a whole series of this series, which are equipped without fan. Starting with 50W nominal power (1" high), the second smallest model - the DVT 50S - with 100W nominal power (2" high), and the bigger brother with 250W nominal power (3" high).
In addition, there was a series with fans, which had higher power for the same size. The flagship was a power amplifier with 500W nominal power at 8 ohms, which easily delivered 1000W at 4 ohms. In mono mode this power wonder delivered more than 4000W at 4 ohms! However, power amps with fans are not suitable for home use because of the noise.
Pictures[edit]
Picture:Rauch DVT 50S prospect.jpg
Picture:Rauch DVT 50S front.jpg
Reviews[edit]
- This unit has provided its service to me for over 20 years in a flawless manner. The purchase of it was a real stroke of luck. A good friend with his own recording studio was working part time in a professional music store. This ended the general agency for "Rauch" in Switzerland and liquidated all devices (The Rauch devices were much too good and too noble for professional use). He recommended the Rauch to me because he had had the best experience with them in the studio. Since then I am the proud owner of a DVT 50S and enjoy it every day. The sound can easily compete with any "high-end" power amplifier in the same price range. Especially the power reserves and the high damping factor are convincing. These power amps are so carefully and well manufactured that they are destined for eternity.
March 2010 / T. H. / Switzerland