Difference between revisions of "Kenwood KR-V 6030"
(3 intermediate revisions by 2 users not shown) | |||
Line 1: | Line 1: | ||
− | == | + | __NOTOC__ |
− | {{ | + | == Data == |
− | ''' | + | {{navigation}} |
− | * | + | '''General''' |
− | ** IEC: | + | * Manufacturer: [[Kenwood]] |
− | ** DIN: 1 | + | * Model: KR-V 6030 |
− | + | * Type: A/V receiver | |
− | * | + | * Years of manufacture: 1991 - 1992 |
− | * | + | * Made in: Japan |
− | ** Phono (MM): 78 dB | + | * Color: Black |
− | ** CD, Tape, Video: 100 dB | + | * Remote control: yes |
− | * | + | * Power consumption: 230 W (IEC) |
− | ** Phono (MM): 2 | + | * Mains output (Switched mains outputs): 1 x 1'200 W max. |
+ | * Dimensions: 440 x 147 mm x 395 mm | ||
+ | * Weight: 7,2 kg | ||
+ | * Original price approx.: 798 DM | ||
+ | |||
+ | |||
+ | '''Connections''' | ||
+ | * Number of inputs: 6 | ||
+ | ** CD | ||
+ | Phono MM/MC | ||
+ | ** Tuner | ||
+ | ** Tape 1 | ||
+ | ** Tape 2 | ||
+ | ** Aux | ||
+ | |||
+ | * Outputs: | ||
+ | ** Speaker A | ||
+ | ** Speaker B | ||
+ | ** Headphones | ||
+ | ** Rec out | ||
+ | |||
+ | |||
+ | '''Technical data''' | ||
+ | |||
+ | '''Audio part''' | ||
+ | *Continuous output power: | ||
+ | ** IEC: from 63 Hz to 12,500 Hz, 0.7% THD at 8 ohms: 110 W + 110 W. | ||
+ | ** DIN: 1,000 Hz at 8 ohms: 120 W + 120 W, 1,000 Hz at 4 ohms: 100 W + 100 W | ||
+ | Total harmonic distortion (1 kHz, 8 ohms): 0.03% at 50 W | ||
+ | * Frequency response (CD): 10 Hz to 50 kHz (+0 dB, -3 dB) | ||
+ | * Interference voltage distance (IHF-A): | ||
+ | ** Phono (MM): 78 dB at 5 mV input. | ||
+ | ** CD, Tape, Video: 100 dB at 200 mV input | ||
+ | * Input sensitivity / impedance: | ||
+ | ** Phono (MM): 2.5 mV / 47 kOhm | ||
** CD, Tape, Video: 200 mV / 47 kOhm | ** CD, Tape, Video: 200 mV / 47 kOhm | ||
− | * | + | * Tone control: |
− | ** Bass: +/- 10 dB | + | ** Bass: +/- 10 dB at 100 Hz |
− | + | Treble: +/- 10 dB at 10 kHz | |
− | ''' | + | '''Video Section''' |
− | * Video | + | * Video inputs/outputs: 1 Vp-p, 75 Ohm unbalanced |
− | ''' | + | '''VHF receiver section''' |
− | * | + | * Reception range: 87.5 MHz - 108.0 MHz |
− | * | + | * Antenna impedance: 75 Ohm unbalanced |
− | * | + | * Input sensitivity (DIN): |
− | ** Mono: 1 | + | ** Mono: 1.1 µV |
− | + | Stereo: 40 µV | |
− | * | + | * Total harmonic distortion at 1000 Hz: |
− | ** Mono: 0 | + | ** Mono: 0.3% |
− | + | Stereo: 0.4% | |
− | * | + | * Signal-to-noise ratio (DIN rated at 1 kHz, 65.2 dBf input): |
** Mono: 68 dB | ** Mono: 68 dB | ||
− | + | Stereo: 61 dB | |
− | * | + | * Separation (DIN, +/- 300 kHz): 65 dB |
− | * | + | * Stereo separation (DIN at 1 kHz): 40 dB |
− | * | + | * Subcarrier suppression (DIN): |
** 19 kHz: 50 dB | ** 19 kHz: 50 dB | ||
− | + | 38 kHz: 60 dB | |
− | * | + | * Frequency response: 30 Hz - 15 kHz (+0.5 dB, -2.0 dB) |
+ | |||
+ | |||
+ | '''MW receiver section''' | ||
+ | * Reception range: 531 kHz - 1,602 kHz | ||
+ | * Receive sensitivity: 12 µV / (400 µV/m) | ||
+ | * Total harmonic distortion: 0,5% | ||
+ | * Interference voltage ratio: 50 dB | ||
+ | * selectivity: 23 dB | ||
+ | |||
+ | |||
+ | [[File:Kenwood KR-V 6030-Prospekt-1991.jpg]] | ||
+ | |||
+ | |||
+ | == Comments == | ||
+ | * Other models in the same series: | ||
+ | * [[Kenwood KR-A 4020]] | ||
+ | * [[Kenwood KR-A 5020]] | ||
+ | * [[Kenwood KR-V 6030]] | ||
+ | * [[Kenwood KR-V 7030]] | ||
+ | * [[Kenwood KR-V 8030]] | ||
+ | * [[Kenwood KR-V 9030]] | ||
+ | |||
+ | |||
+ | == Pictures == | ||
+ | * Extract from brochure: Kenwood KR-V 6030 | ||
+ | [[File:Kenwood_KR-V6030_(Hifi_91).jpg]] | ||
+ | |||
+ | |||
+ | == Reports == | ||
− | + | == Links == | |
− | |||
− | |||
− | |||
− | |||
− | |||
− | + | [[Category:A/V Receivers]] | |
− | |||
− | |||
− | |||
− | |||
− | [[ |
Latest revision as of 07:56, 21 March 2021
Data[edit]
General
- Manufacturer: Kenwood
- Model: KR-V 6030
- Type: A/V receiver
- Years of manufacture: 1991 - 1992
- Made in: Japan
- Color: Black
- Remote control: yes
- Power consumption: 230 W (IEC)
- Mains output (Switched mains outputs): 1 x 1'200 W max.
- Dimensions: 440 x 147 mm x 395 mm
- Weight: 7,2 kg
- Original price approx.: 798 DM
Connections
- Number of inputs: 6
- CD
Phono MM/MC
- Tuner
- Tape 1
- Tape 2
- Aux
- Outputs:
- Speaker A
- Speaker B
- Headphones
- Rec out
Technical data
Audio part
- Continuous output power:
- IEC: from 63 Hz to 12,500 Hz, 0.7% THD at 8 ohms: 110 W + 110 W.
- DIN: 1,000 Hz at 8 ohms: 120 W + 120 W, 1,000 Hz at 4 ohms: 100 W + 100 W
Total harmonic distortion (1 kHz, 8 ohms): 0.03% at 50 W
- Frequency response (CD): 10 Hz to 50 kHz (+0 dB, -3 dB)
- Interference voltage distance (IHF-A):
- Phono (MM): 78 dB at 5 mV input.
- CD, Tape, Video: 100 dB at 200 mV input
- Input sensitivity / impedance:
- Phono (MM): 2.5 mV / 47 kOhm
- CD, Tape, Video: 200 mV / 47 kOhm
- Tone control:
- Bass: +/- 10 dB at 100 Hz
Treble: +/- 10 dB at 10 kHz
Video Section
- Video inputs/outputs: 1 Vp-p, 75 Ohm unbalanced
VHF receiver section
- Reception range: 87.5 MHz - 108.0 MHz
- Antenna impedance: 75 Ohm unbalanced
- Input sensitivity (DIN):
- Mono: 1.1 µV
Stereo: 40 µV
- Total harmonic distortion at 1000 Hz:
- Mono: 0.3%
Stereo: 0.4%
- Signal-to-noise ratio (DIN rated at 1 kHz, 65.2 dBf input):
- Mono: 68 dB
Stereo: 61 dB
- Separation (DIN, +/- 300 kHz): 65 dB
- Stereo separation (DIN at 1 kHz): 40 dB
- Subcarrier suppression (DIN):
- 19 kHz: 50 dB
38 kHz: 60 dB
- Frequency response: 30 Hz - 15 kHz (+0.5 dB, -2.0 dB)
MW receiver section
- Reception range: 531 kHz - 1,602 kHz
- Receive sensitivity: 12 µV / (400 µV/m)
- Total harmonic distortion: 0,5%
- Interference voltage ratio: 50 dB
- selectivity: 23 dB
Comments[edit]
- Other models in the same series:
- Kenwood KR-A 4020
- Kenwood KR-A 5020
- Kenwood KR-V 6030
- Kenwood KR-V 7030
- Kenwood KR-V 8030
- Kenwood KR-V 9030
Pictures[edit]
- Extract from brochure: Kenwood KR-V 6030