Difference between revisions of "Grundig GCCM320"
| (One intermediate revision by one other user not shown) | |||
| Line 1: | Line 1: | ||
| − | '''[[Grundig]] GCCM 320 | + | '''[[Grundig]] GCCM 320 mono microphone''' |
| − | * | + | * Transducer principle: electret condenser microphone (2 separate transducer systems) |
| − | * | + | * Polar pattern: Switchable omnidirectional - cardioid |
| − | * | + | * Acoustic mode of operation: Omnidirectional: pressure transducer; Cardioid: pressure gradient transducer. |
| − | * | + | * Field of application: speech and music; also in acoustically undeveloped rooms. When used in pairs also suitable for stereo. |
| − | * | + | * Frequency response according to nominal curve: +/- 3 dB |
| − | * | + | * Frequency response range: 40 - 20,000 Hz |
| − | * | + | * Cancellation: > 15 dB |
| − | * | + | * Field-to-noise transfer factor at 1 kHz: >= 0.7 mV/µbar |
| − | * | + | * Impedance: 850 Ohm (omnidirectional); 1000 Ohm (cardioid) |
| − | * | + | * Supply voltage: 4.5 V ... 20 V |
| − | * | + | * Current consumption: <= 150 µA |
| − | * | + | * Connection to a tape recorder or cassette deck via 5-pin DIN connector with center pin |
| − | + | Using the adapter cable 278a, two GCCM 320 can be connected for stereo recording. The extension cable 391 is used to extend the microphone cables. | |
| + | |||
| + | [[Category: Microphones]] | ||
| + | |||
| + | |||
| + | |||
| + | |||
| + | [[Image:Grundig_GCCM_320.jpg]] | ||
Latest revision as of 08:33, 28 December 2009
Grundig GCCM 320 mono microphone
- Transducer principle: electret condenser microphone (2 separate transducer systems)
- Polar pattern: Switchable omnidirectional - cardioid
- Acoustic mode of operation: Omnidirectional: pressure transducer; Cardioid: pressure gradient transducer.
- Field of application: speech and music; also in acoustically undeveloped rooms. When used in pairs also suitable for stereo.
- Frequency response according to nominal curve: +/- 3 dB
- Frequency response range: 40 - 20,000 Hz
- Cancellation: > 15 dB
- Field-to-noise transfer factor at 1 kHz: >= 0.7 mV/µbar
- Impedance: 850 Ohm (omnidirectional); 1000 Ohm (cardioid)
- Supply voltage: 4.5 V ... 20 V
- Current consumption: <= 150 µA
- Connection to a tape recorder or cassette deck via 5-pin DIN connector with center pin
Using the adapter cable 278a, two GCCM 320 can be connected for stereo recording. The extension cable 391 is used to extend the microphone cables.
