Difference between revisions of "Wangine WFA-220"
(→Daten) |
Eylenspiegel (talk | contribs) m |
||
| (4 intermediate revisions by 4 users not shown) | |||
| Line 1: | Line 1: | ||
| + | {{needs work}} | ||
__NOTOC__ | __NOTOC__ | ||
| − | == | + | == Data == |
| − | {{ | + | {{navigation}} |
| − | ''' | + | '''General''' |
| − | * | + | * Manufacturer: [[Wangine]] |
| − | * | + | * Model: WFA 220 |
| − | * | + | * Color: Silver |
| − | * | + | * Type: Stereo |
| − | * | + | * Power consumption: max 1000 watts |
| − | * | + | * Dimensions: 422 x 320 x 155 mm (WxHxD) |
| − | * | + | * Weight: 17,8 Kg |
| − | ''' | + | '''Technical data''' |
| − | * | + | * Continuous power |
** 8 Ohm: 2x 250 Watt | ** 8 Ohm: 2x 250 Watt | ||
| − | + | 4 Ohm: 2x 350 Watt | |
| − | * | + | * dynamic power |
** 8 Ohm: 2x 350 Watt | ** 8 Ohm: 2x 350 Watt | ||
** 4 Ohm: 2x 500 Watt | ** 4 Ohm: 2x 500 Watt | ||
| − | * | + | * Distortion factor: < 0.015% |
| − | * | + | * Attenuation factor: 200 |
| − | + | S/N Ratio: 110 DB | |
| − | * | + | *Frequency range: 5-200000 Hz |
| − | * | + | *Bandwidth: 20-25000 Hz |
| − | * | + | *Input impedance: 50 K-Ohm |
| − | * | + | *Input sensitivity: 1.2V. |
| − | ''' | + | '''Semiconductor''' |
| − | *Fet | + | *Fet 4 |
| − | *IC | + | *IC 10 |
| − | * | + | *Transistors 79 |
| − | * | + | *LEDs 138 |
| − | * | + | *bridge rectifier 3 |
| − | * | + | *Diodes 39 |
| + | |||
| + | |||
| + | == Remarks == | ||
| + | |||
| + | The above performance data are original data according to data sheet. | ||
| + | I have made my own measurements with 1000 Hz sine input signal: | ||
| + | |||
| + | * 350 W at 8 Ohm / channel | ||
| + | 480 W into 4 Ohm / channel | ||
| + | |||
| + | The measurements were made with a bifilar and pure resistive 1000 W load resistor up to the clipping limit. The power ratings are valid permanently (as long as there is current). They do not change significantly at other frequencies. | ||
| + | |||
| + | This power amp is obviously capable of far more load as well, as it turned out for me. '''For years the WFA-220 runs with me at 2.66 ohms and that also with relatively long and very high levels and that without any problem!!!'' That is already very remarkable with this model. | ||
| + | |||
| + | |||
| + | == Pictures == | ||
| + | |||
| + | == Reports == | ||
| + | |||
| + | == Links == | ||
| + | |||
| + | * Wangine WFA 220 stereo power amp, Klaus Pohlig [http://www.klaus-pohlig.de/audiohistory/poweramp/wangine-wfa-220/wangine-wfa-220.htm] | ||
| + | * Power Amplifier Tips [http://old-fidelity.de/thread-2903.html] | ||
| + | |||
| + | [[Category:Power Amplifiers]] | ||
Latest revision as of 05:51, 18 October 2015
Data[edit]
General
- Manufacturer: Wangine
- Model: WFA 220
- Color: Silver
- Type: Stereo
- Power consumption: max 1000 watts
- Dimensions: 422 x 320 x 155 mm (WxHxD)
- Weight: 17,8 Kg
Technical data
- Continuous power
- 8 Ohm: 2x 250 Watt
4 Ohm: 2x 350 Watt
- dynamic power
- 8 Ohm: 2x 350 Watt
- 4 Ohm: 2x 500 Watt
- Distortion factor: < 0.015%
- Attenuation factor: 200
S/N Ratio: 110 DB
- Frequency range: 5-200000 Hz
- Bandwidth: 20-25000 Hz
- Input impedance: 50 K-Ohm
- Input sensitivity: 1.2V.
Semiconductor
- Fet 4
- IC 10
- Transistors 79
- LEDs 138
- bridge rectifier 3
- Diodes 39
Remarks[edit]
The above performance data are original data according to data sheet. I have made my own measurements with 1000 Hz sine input signal:
- 350 W at 8 Ohm / channel
480 W into 4 Ohm / channel
The measurements were made with a bifilar and pure resistive 1000 W load resistor up to the clipping limit. The power ratings are valid permanently (as long as there is current). They do not change significantly at other frequencies.
This power amp is obviously capable of far more load as well, as it turned out for me. 'For years the WFA-220 runs with me at 2.66 ohms and that also with relatively long and very high levels and that without any problem!!! That is already very remarkable with this model.