Difference between revisions of "Audio Technica AT 120 E/T"

(Bemerkungen)
 
(2 intermediate revisions by one other user not shown)
Line 1: Line 1:
== Daten ==
+
== Data ==
{{Navigation}}
+
{{navigation}}
'''Allgemein'''
+
'''General'''
  
 +
* 1/2 inch pickup system
 +
* Highly effective "para-toroidal" design
 +
* Center shielding ensures magnetic separation of stereo channels.
 +
* Double fillet stylus and aluminum alloy needle carrier
 +
* Needle cut: Biradial naked
 +
* Frequency response 15 Hz - 25 kHz
 +
* Channel deviation at 1 kHz < 1 dB
 +
* Support weight 1.5 g
 +
* Load resistance 47 kiloohm
 +
* Needle ground elliptical
 +
* Weight 6.5 g
 +
* Output voltage 5 mV
 +
* Compliance 20.00 mm/µN
 +
* Attention: Keep input capacitance preamp + cable capacitance below 200 pF, otherwise strong overboost in the upper frequency range !
  
Das AT 120 E Tonabnehmer System verfügt über einen biradialen Nadelschliff, der Diamant sitzt auf einem polierten
+
== Remarks ==
Aluminium Nadelträger. Die Montage des Tonabnehmer Systems ist relativ einfach. Wegen der seitlich offenen
+
The AT 120 E pickup system has a biradial needle cut, the diamond sits on a polished aluminum needle carrier. The mounting of the pickup system is relatively simple. Because of the open side mounting holes, it can be mounted on any tonearm, no matter how exotic or antique.
Montagelöcher kann es auf jedem noch so exotischen oder antiken Tonarm montiert werden.
+
Mounted on a medium-weight tonearm, the AT 120 E stands out for its great tonal cleanliness. It achieves a remarkable low bass and the result in the treble leaves nothing to be desired. In the mid-range it is noticeable that nothing is conspicuous. The absolutely precise reproduction of natural instruments and voices, which are very often critical with other pickups, earns applause from many listeners. There is never any boredom, because the AT 120 E goes to work very dynamically and does not level even demanding music.  
Auf einen mittelschweren Tonarm montiert, fällt das AT120E Tonbnehmer System durch seine große tonale Sauberkeit
+
All in all, the AT 120 E is a very well-balanced cartridge for listeners who perhaps don't want to enjoy technology but music.
auf. Es erreicht einen beachtlichen Tiefgang und das Ergebnis in den Höhen lässt nichts zu Wünschen übrig. Im Mittelbereich
 
fällt auf, dass nichts auffällig ist. Die absolut präzise Wiedergabe von Naturinstrumenten und Stimmen, die sehr oft bei
 
anderen Tonabnehmern kritisch sind, verdient bei vielen Hörern Beifall. Es kommt nie Langeweile auf, weil das AT 120 E  
 
sehr dynamisch ans Werk geht und auch anspruchsvolle Musik nicht einebnet.  
 
Insgesamt ist das AT120E ein sehr ausgewogenes Tonabnehmer System für Hörer, die vielleicht nicht die Technik,
 
sondern Musik geniesen möchten.
 
  
Fazit
+
Conclusion
Das Audio Technica AT 120 E System ist ein durch und durch modernes System welches für alle mittelschwere Tonarme geignet
+
The Audio Technica AT 120 E is a thoroughly modern system that is suitable for all medium-weight tonearms. It is especially pleasing because of its incorruptible reproduction of any style of music.
ist. Es gefällt vor allem durch seine unbestechliche wiedergabe jeder Musikrichtung.
 
  
* 1/2 Zoll Tonabnehmersystem
+
== Pictures ==
* Hochwirksames "Para-Toroidal" Design
+
[[Picture:AT120.jpg]]
* Mittelabschirmung stellt die magnetische Trennung der Stereo-Kanäle sicher.
+
[[Image:AT120_1.jpg]]
* Abtastdiamant mit doppelter Verrundung und Nadelträger aus Aluminiumlegierung
 
* Nadelschliff: Biradial nackt
 
* Übertragungsbereich 15 Hz - 25 kHz
 
* Kanalabweichung bei 1 kHz < 1 dB
 
* Auflagegewicht 1,5 g
 
* Lastwiederstand 47 Kiloohm
 
* Nadelschliff elliptisch
 
* Gewicht 6,5 g
 
* Ausgangsspannung 5 mV
 
* Compliance 20,00 mm/µN
 
* Achtung: Eingangskapazität Preamp + Kabelkapazität unter 200 pF halten, sonst starke Überhöhung im oberen Frequenzbereich !
 
  
== Bemerkungen ==
+
== Reports ==
 
 
== Bilder ==
 
[[Bild:AT110.jpg]]
 
[[Bild:AT110_1.jpg]]
 
 
 
== Berichte ==
 
  
 
== Links ==
 
== Links ==
Line 46: Line 36:
  
 
    
 
    
[[Kategorie:Tonabnehmer]]
+
[[Category:Pickups]]

Latest revision as of 02:46, 18 November 2013

Data[edit]

General

  • 1/2 inch pickup system
  • Highly effective "para-toroidal" design
  • Center shielding ensures magnetic separation of stereo channels.
  • Double fillet stylus and aluminum alloy needle carrier
  • Needle cut: Biradial naked
  • Frequency response 15 Hz - 25 kHz
  • Channel deviation at 1 kHz < 1 dB
  • Support weight 1.5 g
  • Load resistance 47 kiloohm
  • Needle ground elliptical
  • Weight 6.5 g
  • Output voltage 5 mV
  • Compliance 20.00 mm/µN
  • Attention: Keep input capacitance preamp + cable capacitance below 200 pF, otherwise strong overboost in the upper frequency range !

Remarks[edit]

The AT 120 E pickup system has a biradial needle cut, the diamond sits on a polished aluminum needle carrier. The mounting of the pickup system is relatively simple. Because of the open side mounting holes, it can be mounted on any tonearm, no matter how exotic or antique. Mounted on a medium-weight tonearm, the AT 120 E stands out for its great tonal cleanliness. It achieves a remarkable low bass and the result in the treble leaves nothing to be desired. In the mid-range it is noticeable that nothing is conspicuous. The absolutely precise reproduction of natural instruments and voices, which are very often critical with other pickups, earns applause from many listeners. There is never any boredom, because the AT 120 E goes to work very dynamically and does not level even demanding music. All in all, the AT 120 E is a very well-balanced cartridge for listeners who perhaps don't want to enjoy technology but music.

Conclusion The Audio Technica AT 120 E is a thoroughly modern system that is suitable for all medium-weight tonearms. It is especially pleasing because of its incorruptible reproduction of any style of music.

Pictures[edit]

Picture:AT120.jpg AT120 1.jpg

Reports[edit]

Links[edit]