Difference between revisions of "AVM Evolution V3"
Black CAT II (talk | contribs) |
(→Daten) |
||
| (6 intermediate revisions by 4 users not shown) | |||
| Line 1: | Line 1: | ||
| − | == | + | {{Takes work}} |
| − | {{ | + | ==Data== |
| − | ''' | + | {{navigation}} |
| + | '''General''' | ||
| − | * | + | * Manufacturer: [[AVM]] |
| − | * | + | * Model: AVM Evolution V3 |
| − | * | + | * Years of manufacture: |
| − | * | + | * Made in: Germany |
| − | * | + | * Color: Chrome, black |
| − | * | + | * Type: Analog |
| − | * | + | * Remote control: yes |
| − | * | + | * Power consumption: |
| − | * | + | * Dimensions (WxHxD): 43.5 cm x 11.0 cm x 32.0 cm. |
| − | * | + | * Weight: 7 kg - 10 kg (depending on equipment) |
| − | * | + | * New price depending upon execution approx. 18,000 - 22,000 € |
| − | ''' | + | '''Connections''' |
| − | * | + | * Number of inputs: 9, two monitor loops (phono optional, Disc1, Disc2, Tuner, Aux1-Aux4, Tape 1 to Tape2. |
** CD: 125mV | ** CD: 125mV | ||
| − | Phono MM/MC: 1 | + | Phono MM/MC: 1.25mV/0.2mV , 47kOhm-50pF/1kOhm (adjustable) |
| − | + | ** signal-to-noise ratio CD 104dB(A) | |
| − | + | MM or MC only optional: | |
| − | + | ** signal-to-noise ratio MM 86dB(A) | |
| − | + | S/N ratio MC 78dB(A) | |
| − | + | CD 15kOhm | |
| − | + | ** Impedance MM 47kOhm/50pF (capacitance adjustable via connector) | |
| − | + | ** Impedance MC 1kOhm (resistance adjustable via connector) | |
| − | + | Frequency response high level DC - above 2MHz (-3dB) | |
| − | + | ** Frequency response phono 30Hz - over 20kHz (+/-0,2dB) | |
| − | + | ** Rise time at 50Ohm below 0.3µs | |
| + | |||
| + | * Number of outputs: 2 Cinch, 2 XLR | ||
| + | Cinch 50Ohm | ||
| + | XLR >10V 200Ohm | ||
| − | |||
| − | |||
| − | |||
| − | |||
| + | '''Technical Data''' | ||
| − | + | * Frequency response: DC- over 2 MHz (-3dB). | |
| + | * Distortion factor: | ||
| + | * Signal-to-noise ratio: | ||
| + | * Stereo channel separation: | ||
| + | * Tone control: no | ||
| + | * Loudness: no | ||
| + | * High Filter: no | ||
| + | * Low Filter (Subsonic): no | ||
| + | * Mute: yes | ||
| + | * Direct/Line-Straight: | ||
| + | * Balance: yes | ||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| + | '''Special Features''' | ||
| − | + | ==Notes== | |
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | + | '''Other models in the same series:''' | |
| − | + | * AVM Evolution with PS1 (battery power supply) AVM Evolution V3S, | |
| − | |||
| − | + | ==Pictures== | |
| − | |||
| − | |||
| − | + | [[Category:Preamplifier]] | |
Latest revision as of 18:04, 3 October 2020
Data[edit]
General
- Manufacturer: AVM
- Model: AVM Evolution V3
- Years of manufacture:
- Made in: Germany
- Color: Chrome, black
- Type: Analog
- Remote control: yes
- Power consumption:
- Dimensions (WxHxD): 43.5 cm x 11.0 cm x 32.0 cm.
- Weight: 7 kg - 10 kg (depending on equipment)
- New price depending upon execution approx. 18,000 - 22,000 €
Connections
- Number of inputs: 9, two monitor loops (phono optional, Disc1, Disc2, Tuner, Aux1-Aux4, Tape 1 to Tape2.
- CD: 125mV
Phono MM/MC: 1.25mV/0.2mV , 47kOhm-50pF/1kOhm (adjustable)
- signal-to-noise ratio CD 104dB(A)
MM or MC only optional:
- signal-to-noise ratio MM 86dB(A)
S/N ratio MC 78dB(A) CD 15kOhm
- Impedance MM 47kOhm/50pF (capacitance adjustable via connector)
- Impedance MC 1kOhm (resistance adjustable via connector)
Frequency response high level DC - above 2MHz (-3dB)
- Frequency response phono 30Hz - over 20kHz (+/-0,2dB)
- Rise time at 50Ohm below 0.3µs
- Number of outputs: 2 Cinch, 2 XLR
Cinch 50Ohm XLR >10V 200Ohm
Technical Data
- Frequency response: DC- over 2 MHz (-3dB).
- Distortion factor:
- Signal-to-noise ratio:
- Stereo channel separation:
- Tone control: no
- Loudness: no
- High Filter: no
- Low Filter (Subsonic): no
- Mute: yes
- Direct/Line-Straight:
- Balance: yes
Special Features
Notes[edit]
Other models in the same series:
- AVM Evolution with PS1 (battery power supply) AVM Evolution V3S,