Difference between revisions of "Restek Tornado"
Black CAT II (talk | contribs) |
(→Daten) |
||
| (2 intermediate revisions by one other user not shown) | |||
| Line 1: | Line 1: | ||
| − | == | + | __NOTOC__ |
| − | {{ | + | == Data == |
| − | ''' | + | {{navigation}} |
| − | + | '''General''' | |
| − | * | + | * Manufacturer: [[Restek]] |
| − | * | + | * Model: Tornado |
| − | * | + | * Year built: about 1980 |
| − | * | + | * Manufactured in: [[Norhessen]] |
| − | * | + | * Color: brown |
| − | * | + | * Type: Analog |
| − | * | + | * Remote control: No |
| − | * | + | * Power consumption: |
| − | * | + | * Dimensions: 400 x 24 x 515 mm |
| − | * | + | * Weight: |
| − | * | + | * New price approx: |
| − | ''' | + | '''Connections''' |
| − | * | + | * Number of inputs: |
| − | ** | + | ** list inputs here (with sensitivity/impedance). |
| − | * | + | * Number of outputs: |
| − | ** | + | ** list the outputs here (with level/impedance). |
| − | ''' | + | '''Technical Data Amplifier''' |
| − | * | + | * type: power amplifier |
| − | * | + | * Continuous power (with distortion factor) |
** 8 Ohm: | ** 8 Ohm: | ||
| − | ** 4 Ohm: 70W | + | ** 4 Ohm: 70W |
| − | * | + | * Dynamic power |
** 8 Ohm: | ** 8 Ohm: | ||
| − | ** 4 Ohm: | + | ** 4 Ohm:110W |
| − | * | + | * Total harmonic distortion: |
| − | * | + | * Attenuation Factor: |
| − | * | + | * Frequency response: 20 - 20,000 Hz |
| − | * | + | * Signal-to-noise ratio: |
| − | * | + | * Stereo channel separation: |
| − | * | + | * Tone control: |
** Bass: | ** Bass: | ||
| − | ** | + | ** Treble: |
* Loudness: | * Loudness: | ||
* High Filter: | * High Filter: | ||
| Line 46: | Line 46: | ||
| − | ''' | + | '''Speaker Specifications''' |
| − | * | + | * Construction: |
* Chassis: | * Chassis: | ||
| − | ** | + | ** cone woofer 170 mm, cone midrange 90 mm, tweeter dome 25 mm. |
| − | * | + | * Power handling (nominal / music b.): 70 / 110 W. |
| − | + | Efficiency: | |
| − | * | + | * Frequency response: 20 - 20,000 Hz. |
| − | * | + | * Transitional ranges: (for LS with multiple drivers) 900, 4,000 Hz. |
| − | * | + | * Impedance: |
| − | ''' | + | '''Special Features''' |
| − | * | + | * active correction of the cone excursion of the woofer by means of a ceramic accelerometer |
| − | * | + | * alignment of the drivers vertically upwards |
| − | * | + | * cone above tweeter to disperse the sound |
| − | * | + | * Corresponds to the [[Restek Laser|Laser]] model. Electronics, drivers and arrangement of drivers on the baffle are identical. It was basically put the lasers on the back and extended the cabinet so that the box reaches the height of a stool. For the radiation of the high frequency a plastic cone was mounted above the dome (negatively curved, hyperbolic?). |
| + | == Comments == | ||
| + | Other models of the same series: | ||
| − | == | + | == Pictures == |
| − | |||
| − | == | + | == Reports == |
| − | == | + | == Links == |
| − | + | <br /> | |
| − | [[ | + | [[Category:Active loudspeaker]] |
Latest revision as of 09:40, 8 April 2020
Data[edit]
General
- Manufacturer: Restek
- Model: Tornado
- Year built: about 1980
- Manufactured in: Norhessen
- Color: brown
- Type: Analog
- Remote control: No
- Power consumption:
- Dimensions: 400 x 24 x 515 mm
- Weight:
- New price approx:
Connections
- Number of inputs:
- list inputs here (with sensitivity/impedance).
- Number of outputs:
- list the outputs here (with level/impedance).
Technical Data Amplifier
- type: power amplifier
- Continuous power (with distortion factor)
- 8 Ohm:
- 4 Ohm: 70W
- Dynamic power
- 8 Ohm:
- 4 Ohm:110W
- Total harmonic distortion:
- Attenuation Factor:
- Frequency response: 20 - 20,000 Hz
- Signal-to-noise ratio:
- Stereo channel separation:
- Tone control:
- Bass:
- Treble:
- Loudness:
- High Filter:
- Low Filter (Subsonic):
- Mute:
- Direct/Line-Straight:
Speaker Specifications
- Construction:
- Chassis:
- cone woofer 170 mm, cone midrange 90 mm, tweeter dome 25 mm.
- Power handling (nominal / music b.): 70 / 110 W.
Efficiency:
- Frequency response: 20 - 20,000 Hz.
- Transitional ranges: (for LS with multiple drivers) 900, 4,000 Hz.
- Impedance:
Special Features
- active correction of the cone excursion of the woofer by means of a ceramic accelerometer
- alignment of the drivers vertically upwards
- cone above tweeter to disperse the sound
- Corresponds to the Laser model. Electronics, drivers and arrangement of drivers on the baffle are identical. It was basically put the lasers on the back and extended the cabinet so that the box reaches the height of a stool. For the radiation of the high frequency a plastic cone was mounted above the dome (negatively curved, hyperbolic?).
Comments[edit]
Other models of the same series:
Pictures[edit]
Reports[edit]
Links[edit]