Difference between revisions of "Kenwood KR-5600"
(→Daten) |
|||
(12 intermediate revisions by 3 users not shown) | |||
Line 1: | Line 1: | ||
__NOTOC__ | __NOTOC__ | ||
− | == | + | == Data == |
− | {{ | + | {{navigation}} |
− | ''' | + | '''General''' |
− | * | + | * Manufacturer: [[Kenwood]] |
− | * | + | * Model: KR-5600 |
− | * | + | * Year of manufacture: 1976 - 1978 |
− | * | + | * Made in: Japan |
− | * | + | * Color: silver, side parts in wood |
− | * | + | * Remote control: no |
− | * | + | * Power consumption: 300 watts |
− | * | + | * Dimensions: 500 x 140 x 334 mm (WxHxD) |
− | * | + | * Weight: 11,2 kg |
− | * | + | * Original price approx.: 360 US-$, 1'600 DM |
− | ''' | + | '''Connections''' |
− | * | + | * Number of inputs: |
** 2x Phono MM (Cinch): 2,5 mV / 50 kOhm | ** 2x Phono MM (Cinch): 2,5 mV / 50 kOhm | ||
− | + | 2x Tape In (Cinch/DIN): 150 mV / 50 kOhm | |
** AUX (Cinch): 150 mV / 80 kOhm | ** AUX (Cinch): 150 mV / 80 kOhm | ||
** Adapter In | ** Adapter In | ||
− | ** | + | ** Antenna FM (75/300 Ohm), AM |
− | * | + | * Number of outputs: |
** 2x Tape Out (Cinch/DIN): 150 mV / 100 Ohm (Cinch); 30 mV / 80 kOhm (DIN) | ** 2x Tape Out (Cinch/DIN): 150 mV / 100 Ohm (Cinch); 30 mV / 80 kOhm (DIN) | ||
** Adapter Out | ** Adapter Out | ||
− | + | FM Quadradial | |
− | ** | + | ** Headphones (6.3 mm jack, front) |
− | ** 2 | + | ** 2 pairs of loudspeakers |
− | ''' | + | '''Technical Specifications''' |
− | '' | + | ''Amplifier'' |
− | * | + | * Continuous power |
− | ** 8 Ohm: 2x 40 | + | ** 8 Ohm: 2x 40 Watt (20-20,000 Hz) |
− | ** | + | ** 8 Ohm: 2x 43 Watt (1 kHz) |
− | * | + | ** 4 Ohm: 2x 48 Watt (1 kHz) |
− | * | + | * Total harmonic distortion: 0.06% (at 1 Watt), 0.5% (at rated power) |
− | * | + | * Intermodulation distortion: 0.5% (60/7,000 Hz, 4:1, at nominal power) |
− | * | + | * Attenuation factor: 40 (8 ohms) |
− | * | + | * Frequency response: |
− | * | + | ** Preamplifier: 20 - 50,000 Hz. |
− | ** | + | ** Power bandwidth: 7 - 35,000 Hz |
− | ** | + | * Signal-to-noise ratio: |
− | * | ||
** Phono MM: 70 dB | ** Phono MM: 70 dB | ||
** AUX, Tape: 90 dB | ** AUX, Tape: 90 dB | ||
− | * | + | * Stereo channel separation: |
− | * | + | * Tone control: |
− | ** Bass: ±8 dB | + | ** Bass: ±8 dB at 100 Hz |
− | + | Treble: ±8 dB at 10 kHz | |
* Loudness: +8/+5 dB (100 Hz/10 kHz) | * Loudness: +8/+5 dB (100 Hz/10 kHz) | ||
− | * High Filter: -10 dB | + | * High Filter: -10 dB at 10 kHz, 6 dB/octave |
− | * Low Filter (Subsonic): | + | * Low Filter (Subsonic): no |
− | * Mute: FM | + | * Mute: FM muting |
− | * Direct/Line-Straight: | + | * Direct/Line-Straight: no |
+ | * Output impedance 4 - 16 Ohm | ||
''Tuner'' | ''Tuner'' | ||
− | * | + | * Reception: FM, MW |
− | * | + | * Frequencies: |
− | ** | + | ** FM: 87.5 - 108 MHz |
− | + | MW: 525 - 1605 kHz | |
− | * | + | * Frequency response: 20 - 15,000 Hz (+0/-1.5 dB, FM) |
− | * | + | * Input sensitivity: |
− | ** | + | ** FM: 1.8 µV (IHF), at 50 dB signal-to-noise ratio 3.0 µV (mono) / 37 µV (stereo). |
− | + | MW: 20 µV | |
− | + | Distortion factor: | |
− | ** | + | ** FM: 0.15% (mono), 0.25% (stereo). |
− | * | + | * Signal-to-noise ratio: |
− | ** | + | ** FM: 75 dB (mono), 70 dB (stereo) |
− | + | MW: 50 dB | |
− | * | + | * Channel separation: |
− | ** | + | ** FM: 40 dB (at 1 kHz), 35 dB (50 - 10,000 Hz). |
− | * | + | * Selectivity: (IHF) |
− | + | FM: 80 dB | |
− | + | MW: 35 dB | |
− | * | + | * Equal wave selection: |
− | ** | + | ** FM: 1.5 dB |
− | * | + | * Spurious wave suppression: |
− | ** | + | ** FM: 85 dB |
− | * | + | * Ambient Frequency Suppression: |
− | ** | + | ** FM: 85 dB |
** MW: 45 dB | ** MW: 45 dB | ||
− | + | IF suppression: | |
− | ** | + | ** FM: 100 dB |
− | * AM | + | * AM suppression: 65 dB |
− | * | + | * Subcarrier suppression: 40 dB |
− | * | + | * Antenna inputs 75 Ohm & 300 Ohm |
− | |||
− | ''' | + | '''Special Features''' |
− | * | + | * Direct-coupled amplifier stages, true complementary output stage, devices such as equalizers can be looped in. |
− | * | + | * Separate phono preamplifier with DLNOA-IC |
− | * | + | * FM input stage with dual-gate MOS-FET |
− | * | + | * Frequency linear variable capacitor |
− | * | + | * Wideband FM demodulator, linear FM scale with 200 kHz division |
− | * Signal | + | * Signal meter (field strength) and tuning meter (VHF channel center) |
− | * Zf | + | * Zf amplifier with ceramic filters |
− | + | * Switchable de-emphasis for broadcast Dolby adapter, connection for Dolby adapter | |
− | * | ||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | == | + | == Remarks == |
+ | * Other models in the same series: | ||
+ | ** [[Kenwood KR-2600]] | ||
+ | ** [[Kenwood KR-3600]] | ||
+ | ** [[Kenwood KR-4600]] | ||
+ | ** [[Kenwood KR-5600]] | ||
+ | ** [[Kenwood KR-6600]] | ||
+ | ** [[Kenwood KR-7600]] | ||
+ | ** [[Kenwood KR-9600]] | ||
+ | |||
+ | |||
+ | == Pictures == | ||
+ | * Image: Kenwood KR-5600 Front | ||
+ | [[File:Kenwood KR-5600-3.jpg]] | ||
+ | |||
+ | |||
+ | * Picture: Kenwood KR-5600 rear | ||
+ | [[File:Kenwood KR-5600-2.jpg]] | ||
+ | |||
+ | |||
+ | == Reports == | ||
− | |||
== Links == | == Links == | ||
− | [[ | + | [[Category:Receiver]] |
Latest revision as of 05:46, 29 April 2019
Data[edit]
General
- Manufacturer: Kenwood
- Model: KR-5600
- Year of manufacture: 1976 - 1978
- Made in: Japan
- Color: silver, side parts in wood
- Remote control: no
- Power consumption: 300 watts
- Dimensions: 500 x 140 x 334 mm (WxHxD)
- Weight: 11,2 kg
- Original price approx.: 360 US-$, 1'600 DM
Connections
- Number of inputs:
- 2x Phono MM (Cinch): 2,5 mV / 50 kOhm
2x Tape In (Cinch/DIN): 150 mV / 50 kOhm
- AUX (Cinch): 150 mV / 80 kOhm
- Adapter In
- Antenna FM (75/300 Ohm), AM
- Number of outputs:
- 2x Tape Out (Cinch/DIN): 150 mV / 100 Ohm (Cinch); 30 mV / 80 kOhm (DIN)
- Adapter Out
FM Quadradial
- Headphones (6.3 mm jack, front)
- 2 pairs of loudspeakers
Technical Specifications
Amplifier
- Continuous power
- 8 Ohm: 2x 40 Watt (20-20,000 Hz)
- 8 Ohm: 2x 43 Watt (1 kHz)
- 4 Ohm: 2x 48 Watt (1 kHz)
- Total harmonic distortion: 0.06% (at 1 Watt), 0.5% (at rated power)
- Intermodulation distortion: 0.5% (60/7,000 Hz, 4:1, at nominal power)
- Attenuation factor: 40 (8 ohms)
- Frequency response:
- Preamplifier: 20 - 50,000 Hz.
- Power bandwidth: 7 - 35,000 Hz
- Signal-to-noise ratio:
- Phono MM: 70 dB
- AUX, Tape: 90 dB
- Stereo channel separation:
- Tone control:
- Bass: ±8 dB at 100 Hz
Treble: ±8 dB at 10 kHz
- Loudness: +8/+5 dB (100 Hz/10 kHz)
- High Filter: -10 dB at 10 kHz, 6 dB/octave
- Low Filter (Subsonic): no
- Mute: FM muting
- Direct/Line-Straight: no
- Output impedance 4 - 16 Ohm
Tuner
- Reception: FM, MW
- Frequencies:
- FM: 87.5 - 108 MHz
MW: 525 - 1605 kHz
- Frequency response: 20 - 15,000 Hz (+0/-1.5 dB, FM)
- Input sensitivity:
- FM: 1.8 µV (IHF), at 50 dB signal-to-noise ratio 3.0 µV (mono) / 37 µV (stereo).
MW: 20 µV Distortion factor:
- FM: 0.15% (mono), 0.25% (stereo).
- Signal-to-noise ratio:
- FM: 75 dB (mono), 70 dB (stereo)
MW: 50 dB
- Channel separation:
- FM: 40 dB (at 1 kHz), 35 dB (50 - 10,000 Hz).
- Selectivity: (IHF)
FM: 80 dB MW: 35 dB
- Equal wave selection:
- FM: 1.5 dB
- Spurious wave suppression:
- FM: 85 dB
- Ambient Frequency Suppression:
- FM: 85 dB
- MW: 45 dB
IF suppression:
- FM: 100 dB
- AM suppression: 65 dB
- Subcarrier suppression: 40 dB
- Antenna inputs 75 Ohm & 300 Ohm
Special Features
- Direct-coupled amplifier stages, true complementary output stage, devices such as equalizers can be looped in.
- Separate phono preamplifier with DLNOA-IC
- FM input stage with dual-gate MOS-FET
- Frequency linear variable capacitor
- Wideband FM demodulator, linear FM scale with 200 kHz division
- Signal meter (field strength) and tuning meter (VHF channel center)
- Zf amplifier with ceramic filters
- Switchable de-emphasis for broadcast Dolby adapter, connection for Dolby adapter
Remarks[edit]
- Other models in the same series:
Pictures[edit]
- Image: Kenwood KR-5600 Front
- Picture: Kenwood KR-5600 rear