Difference between revisions of "Pioneer A-757 MK II"
| (21 intermediate revisions by 8 users not shown) | |||
| Line 1: | Line 1: | ||
| − | + | __NOTOC__ | |
| + | == Short description == | ||
| + | External differences from the A-757: smaller knobs replaced by cylindrical versions resembling the large knobs. Golden dot ''only'' on the volume pot. Inside: still horizontal circuit boards, but already no honeycomb housing around the volume pot at the back right of the unit. No copper bottom anymore! | ||
| + | == Data == | ||
| + | {{navigation}} | ||
| + | '''General''' | ||
| + | * Manufacturer: [[Pioneer]] | ||
| + | * Model: A-757 MK II | ||
| + | * Type: Integrated amplifier | ||
| + | * Years of manufacture: 1990 - 1991 | ||
| + | * Made in: Japan | ||
| + | * Color: Black | ||
| + | * Remote control: No | ||
| + | * Power consumption: 820 W (max) | ||
| + | * Dimensions: 420 x 435 x 162 mm (WxDxH) | ||
| + | * Weight: 19,5 kg | ||
| + | * Original price approx.: 1'000 DM | ||
| − | |||
| − | |||
| + | '''Connections''' | ||
| + | * Number of inputs: 8 | ||
| + | ** DAT /TAPE 1, TAPE 2, ADAPTER1/ TAPE3, ADAPTER 2, CD (gold plated), TUNER, LINE, PHONO (gold plated) | ||
| + | * Number of outputs: 2 | ||
| + | ** TAPE 1/CD-R/MD, TAPE 2 MONITOR | ||
| − | |||
| − | + | '''Specifications''' | |
| − | + | * Continuous power (at distortion) | |
| − | + | ** 8 Ohm: 2x 95 W / 0,003% | |
| − | + | ** 4 Ohm: 2x 140 W | |
| − | + | 2 Ohm: 2x 200 W | |
| − | + | * Dynamic power | |
| − | + | ** 8 Ohm: 2x 150 W | |
| − | + | ** 4 Ohm: 2x 200 W | |
| − | + | ** 2 Ohm: 2x 300 W | |
| − | + | * Total harmonic distortion: 0.003% (20Hz - 20 kHz, 95W, 8 Ohm) | |
| − | - | + | * Frequency response: 1 Hz - 150 kHz 0 dB- 3 dB |
| − | + | * Signal-to-noise ratio: 108 dB | |
| − | |||
| − | |||
| − | 2 | + | '''Special Features''' |
| − | + | * Recording selector switch | |
| − | + | * Speaker pairs and headphones are switched via relays | |
| − | + | * Metal front panel | |
| − | + | * Direct - switch to bypass the tone control stage | |
| − | " Non- Switching" | + | * Phono - input with choice of MM/MM subsonic filter/MC/MC subsonic filter |
| − | + | * switchable phono preamplifier | |
| − | + | * Separable pre- and power amplifier | |
| + | * connections for 2 speaker pairs A+B | ||
| + | * shortened signal paths for the cleanest sound imaginable | ||
| + | * spatially separated stages: Reduced interference | ||
| + | * resonance-damping design: honeycomb-reinforced frame, heat sink and dampers to eliminate microphonic effects | ||
| + | * powerful, low-impedance power supply: 2 power transformers and finned solid cast enclosure ensure high capacitance | ||
| + | * good resonance damping and clean magnetic shielding | ||
| + | * "Non-Switching" Type III: elimination of switching distortion and improved stability at low impedances | ||
| + | * phono equalizer (can be switched off) with high gain; suitable for MM and MC systems | ||
| + | |||
| + | |||
| + | == Remarks == | ||
| + | * Previous model: | ||
| + | * [[Pioneer A-757]] | ||
| + | |||
| + | |||
| + | * Successor model: | ||
| + | * [[Pioneer A-777]] | ||
| + | |||
| + | |||
| + | * Other models in the same series: | ||
| + | *[[Pioneer A-227]] | ||
| + | *[[Pioneer A-337]] | ||
| + | *[[Pioneer A-447]] | ||
| + | *[[Pioneer A-656 MK II]] | ||
| + | *[[Pioneer A-757 MK II]] | ||
| + | *[[Pioneer A-858]] | ||
| + | |||
| + | |||
| + | == Pictures == | ||
| + | *[[Picture: Pioneer A-757 MK II | ||
| + | [[File:Pioneer A-757 Mark II.jpg]] | ||
| + | |||
| + | |||
| + | == Reviews == | ||
| + | |||
| + | == Links == | ||
| + | |||
| + | |||
| + | [[Category:Integrated amplifier]] | ||
Latest revision as of 23:49, 7 April 2021
Short description[edit]
External differences from the A-757: smaller knobs replaced by cylindrical versions resembling the large knobs. Golden dot only on the volume pot. Inside: still horizontal circuit boards, but already no honeycomb housing around the volume pot at the back right of the unit. No copper bottom anymore!
Data[edit]
General
- Manufacturer: Pioneer
- Model: A-757 MK II
- Type: Integrated amplifier
- Years of manufacture: 1990 - 1991
- Made in: Japan
- Color: Black
- Remote control: No
- Power consumption: 820 W (max)
- Dimensions: 420 x 435 x 162 mm (WxDxH)
- Weight: 19,5 kg
- Original price approx.: 1'000 DM
Connections
- Number of inputs: 8
- DAT /TAPE 1, TAPE 2, ADAPTER1/ TAPE3, ADAPTER 2, CD (gold plated), TUNER, LINE, PHONO (gold plated)
- Number of outputs: 2
- TAPE 1/CD-R/MD, TAPE 2 MONITOR
Specifications
- Continuous power (at distortion)
- 8 Ohm: 2x 95 W / 0,003%
- 4 Ohm: 2x 140 W
2 Ohm: 2x 200 W
- Dynamic power
- 8 Ohm: 2x 150 W
- 4 Ohm: 2x 200 W
- 2 Ohm: 2x 300 W
- Total harmonic distortion: 0.003% (20Hz - 20 kHz, 95W, 8 Ohm)
- Frequency response: 1 Hz - 150 kHz 0 dB- 3 dB
- Signal-to-noise ratio: 108 dB
Special Features
- Recording selector switch
- Speaker pairs and headphones are switched via relays
- Metal front panel
- Direct - switch to bypass the tone control stage
- Phono - input with choice of MM/MM subsonic filter/MC/MC subsonic filter
- switchable phono preamplifier
- Separable pre- and power amplifier
- connections for 2 speaker pairs A+B
- shortened signal paths for the cleanest sound imaginable
- spatially separated stages: Reduced interference
- resonance-damping design: honeycomb-reinforced frame, heat sink and dampers to eliminate microphonic effects
- powerful, low-impedance power supply: 2 power transformers and finned solid cast enclosure ensure high capacitance
- good resonance damping and clean magnetic shielding
- "Non-Switching" Type III: elimination of switching distortion and improved stability at low impedances
- phono equalizer (can be switched off) with high gain; suitable for MM and MC systems
Remarks[edit]
- Previous model:
- Pioneer A-757
- Successor model:
- Pioneer A-777
- Other models in the same series:
- Pioneer A-227
- Pioneer A-337
- Pioneer A-447
- Pioneer A-656 MK II
- Pioneer A-757 MK II
- Pioneer A-858
Pictures[edit]
- [[Picture: Pioneer A-757 MK II
