Difference between revisions of "IQ System One"

(Daten)
(Daten: fehlendes Leerzeichen hinzugefügt)
 
(14 intermediate revisions by 10 users not shown)
Line 1: Line 1:
 
__NOTOC__
 
__NOTOC__
== Daten ==
+
== Data ==
{{Navigation}}
+
{{navigation}}
'''Allgemein'''
+
'''General'''
* Hersteller: [[IQ|I.Q.]]
+
* Manufacturer: [[IQ|I.Q.]]
* Modell: System One MK I / MK II
+
* Model: System One MK I / MK II
* Farbe: diverse Hölzer nach Wunsch
+
* Color: various woods as desired
* Abmessungen: BxHxT
+
* Dimensions: WxHxD
** Subwoofertürme: 330 x 1230 x 350 mm
+
** Subwoofer towers: 330 x 1230 x 350 mm
** Satelliten: 230 x 1000 x 280 mm
+
** Satellites: 230 x 1000 x 280 mm
* Gewicht:  
+
* Weight:  
** Subwoofertürme: 61 kg
+
** Subwoofer towers: 61 kg
** Satelliten: 33 kg / ? kg
+
** Satellites: 33 kg / 21 kg
* Neupreis ca.: 10.000 Euro
+
* Original price approx:  
* Nomenklatur: Die Zusammenstellung aus Subwoofer und Satelliten bezeichnete der Hersteller jeweils mit System.X, also System.One für das große, System.Two für das mittelgroße und System.Three für das kleine System. Die Subwoofer wurden dabei jeweils mit .1 bezeichnet, die Satelliten mit .2, also System.One.1 für die großen Subwoofer und bspw. System.Three.2 für die kleinsten Satelliten.
+
** Satellites System.One.2: 3500,- Euro / pair
* Die MK-I-Version wurde von Herrn Karl-Heinz Fink entwickelt, für die MK-II-Version zeichnet Herr Manfred Diestertich verantwortlich, heute bei Audiophysic.
+
** Subwoofer System.One.1: 6500,- Euro / pair
 +
** adaptive control with MKII (to prevent the voice coils from hitting the largest strokes): 2000,- Euro / pair
  
'''Technische Daten'''
+
 
* Bauart: Sub/Sat-System, geschlossen
+
'''Technical Data'''
* Chassis
+
* Type of construction: Sub/Sat-System, closed
** Subwoofertürme "System.One.1" (MK I und MK II unterscheiden sich durch die Verstärkerelektronik)
+
* chassis
*** 3 x 260 mm Konus Polypropylen (VIFA)  
+
** Subwoofer towers "System.One.1" (MK I and MK II differ in amplifier electronics and bass control).
** Satelliten "System.One.2" MK I
+
*** 3 x 260 mm cone polypropylene (Vifa P25WO-31-06 for MKI and P25WO-33-08 for MKII)  
*** 2 x 180 mm Konus Polypropylen
+
** Satellites "System.One.2" MK I
*** 1 x 25 mm Kalotte Titan (Vifa)
+
*** 2 x 170 mm cone polypropylene (Vifa)
** Satelliten "System.One.2" MK II
+
*** 1 x 25 mm dome tweeter titanium (Vifa)
*** 2 x 180 mm Konus Chitin Sandwich (GIA)
+
Power handling satellites (nominal/music power): - / 160 Watt
*** 1 x 25 mm Kalotte Weichaluminium, anodisiert (SEAS)
+
** Satellites "System.One.2" MK II
* Belastbarkeit Satelliten (Nenn-/Musikb.): 90 / 140 Watt
+
*** 1 x 180 mm cone chitin sandwich midrange driver (GIA 170-02/4)
* Wirkungsgrad: 89dB (Satelliten MK II)
+
*** 1 x 180 mm cone chitin sandwich bass driver (GIA 180-03/4, double magnet, long excursion)
* Leistung: 400 Watt (Subwoofer)
+
*** 1 x 25 mm dome tweeter soft aluminium, anodised (SEAS 25 TAFC/D modified f. I.Q)
* Frequenzgang
+
* Power handling satellites (nominal/music): 90 / 140 Watt
 +
* Efficiency: 89dB (Satellites MK II).
 +
* Power:
 +
** 400 Watt Subwoofer MK II
 +
350 Watt Subwoofer MK I
 +
* Frequency response
 
** Subwoofer: 18 Hz (-3dB) - 90 Hz
 
** Subwoofer: 18 Hz (-3dB) - 90 Hz
** Satelliten: 50 Hz - 20.000 Hz
+
** Satellites: 50 Hz - 20,000 Hz
 +
* Maximum sound pressure: 108 dB (1m)
 +
 
 +
* Crossover: 90 Hz / 2800 Hz (18dB)
  
* Übergangsbereiche: 90 Hz / 2800 Hz (18dB)
+
* Impedance:  
 +
** Satellites MK I: 6 Ohm (measured: AUDIO).
 +
** Satellites MK II: 3 Ohm / 2.7 kHz (measured: HIFI VISION)
  
* Impedanz:
 
** Satelliten MK I: 6 Ohm (gemessen: AUDIO)
 
** Satelliten MK II: 3 Ohm / 2,7 kHz (gemessen: HIFI VISION)
 
  
 +
'''Special features'''
 +
* active bass control via dual voice coils and black box at MKII (developed by Swoboda)
 +
* active bass control via acceleration sensor in bottom bass driver at MKI (licensed by ART)
  
'''Besondere Ausstattungen'''
+
'''Trivia'''
* aktive Bassregelung über Doppelschwingspulen und Blackbox
+
* XLR input jack at satellites from MKI was intended for later regulation of satellites, but never used.
 +
Nomenclature: The manufacturer designated the combination of subwoofer and satellites with System.X, i.e. System.One for the large system, System.Two for the medium-sized system and System.Three for the small system. The subwoofers were designated with .1, the satellites with .2, i.e. System.One.1 for the large subwoofers and System.Three.2 for the smallest satellites.
 +
The MK-I version was developed by Mr. Karl-Heinz Fink, the MK-II version was developed by Mr. Manfred Diestertich, now with Audiophysic.
 +
The crossover modules of the two versions differ in their practicality in that the modules of the MK I version could be switched off. Thus it was possible to listen in the evening without subwoofer via the satellites in the full range. This is not possible with the MK II. Here you have to reconnect.
 +
In the MK II version of the subwoofer electronics there is a jumper that overrides the built-in filter. This means that the woofers of the System.One, -.Two and -.Three versions can be operated universally as subwoofers with an external woofer crossover or via an AV receiver.
  
== Bemerkungen ==
+
== Notes ==
Weitere Modelle der gleichen Serie:
+
Other models in the same series:
 
* [[IQ System One|System One]]
 
* [[IQ System One|System One]]
 
* [[IQ System Two|System Two]]
 
* [[IQ System Two|System Two]]
 
* [[IQ System Three|System Three]]
 
* [[IQ System Three|System Three]]
  
== Bilder ==
+
== Pictures ==
http://img391.imageshack.us/img391/3567/systemonemkiiaf9.jpg
+
http://img40.imageshack.us/img40/5985/systemoneseite1mittel.jpg
  
* Zu sehen die System.One MKII Version von Manfred Diestertich mit den SEAS-Hochtönern, den neueren Endstufen und den Chitin-Treibern.
+
* You can see the System.One MKII version by Manfred Diestertich with the SEAS tweeters, the newer power amps and the Chitin drivers.
  
http://img504.imageshack.us/img504/1623/sandwichbs2.jpg
+
http://img507.imageshack.us/img507/6536/systemonetwo.jpg
  
* Zu sehen der Sandwich-Aufbau der Gehäusewände der Satelliten System.One.2
+
* Here the combination of System.One MKII satellites and the System.Two subwoofers
  
== Berichte ==
+
== Reviews ==
  
* Testergebnis des I.Q System.One MKII (mit Chitinmembran-Satelliten) in der HIFI-VISION:
+
* Test result of the I.Q System.One MKII (with chitin membrane satellites) in HIFI-VISION:
** "Keine Frage, ihre Über-Alles-Qualitäten stempeln I.Qs Energie-Konzert-Zentrale zur Referenz im wahrsten Sinne des Wortes: Eben zum Bewertungsmaßstab für die Beurteilung von Lautsprechern"
+
** "No question, their over-all qualities stamp I.Q's energy concert center as the reference in the truest sense of the word: precisely, the evaluation standard for judging loudspeakers."
  
 
http://img529.imageshack.us/img529/2056/testprofilqa5.jpg
 
http://img529.imageshack.us/img529/2056/testprofilqa5.jpg
  
* Testergebnis des I.Q System.One MKI (mit Polyprop-Satelliten) in der AUDIO:  
+
* Test result of the I.Q System.One MKI (with polyprop satellites) in AUDIO:  
** 91 Punkte, Referenzklasse
+
91 points, reference class 5 ears
  
 
== Links ==
 
== Links ==
* Für Serviceanfragen: mailto:info@IQSystemOne.de
+
* For service requests: info@IQSystemOne.de
[[Kategorie:Lautsprecher]]
+
[[Category:Loudspeaker]]

Latest revision as of 10:43, 29 July 2018

Data[edit]

General

  • Manufacturer: I.Q.
  • Model: System One MK I / MK II
  • Color: various woods as desired
  • Dimensions: WxHxD
    • Subwoofer towers: 330 x 1230 x 350 mm
    • Satellites: 230 x 1000 x 280 mm
  • Weight:
    • Subwoofer towers: 61 kg
    • Satellites: 33 kg / 21 kg
  • Original price approx:
    • Satellites System.One.2: 3500,- Euro / pair
    • Subwoofer System.One.1: 6500,- Euro / pair
    • adaptive control with MKII (to prevent the voice coils from hitting the largest strokes): 2000,- Euro / pair


Technical Data

  • Type of construction: Sub/Sat-System, closed
  • chassis
    • Subwoofer towers "System.One.1" (MK I and MK II differ in amplifier electronics and bass control).
      • 3 x 260 mm cone polypropylene (Vifa P25WO-31-06 for MKI and P25WO-33-08 for MKII)
    • Satellites "System.One.2" MK I
      • 2 x 170 mm cone polypropylene (Vifa)
      • 1 x 25 mm dome tweeter titanium (Vifa)

Power handling satellites (nominal/music power): - / 160 Watt

    • Satellites "System.One.2" MK II
      • 1 x 180 mm cone chitin sandwich midrange driver (GIA 170-02/4)
      • 1 x 180 mm cone chitin sandwich bass driver (GIA 180-03/4, double magnet, long excursion)
      • 1 x 25 mm dome tweeter soft aluminium, anodised (SEAS 25 TAFC/D modified f. I.Q)
  • Power handling satellites (nominal/music): 90 / 140 Watt
  • Efficiency: 89dB (Satellites MK II).
  • Power:
    • 400 Watt Subwoofer MK II

350 Watt Subwoofer MK I

  • Frequency response
    • Subwoofer: 18 Hz (-3dB) - 90 Hz
    • Satellites: 50 Hz - 20,000 Hz
  • Maximum sound pressure: 108 dB (1m)
  • Crossover: 90 Hz / 2800 Hz (18dB)
  • Impedance:
    • Satellites MK I: 6 Ohm (measured: AUDIO).
    • Satellites MK II: 3 Ohm / 2.7 kHz (measured: HIFI VISION)


Special features

  • active bass control via dual voice coils and black box at MKII (developed by Swoboda)
  • active bass control via acceleration sensor in bottom bass driver at MKI (licensed by ART)

Trivia

  • XLR input jack at satellites from MKI was intended for later regulation of satellites, but never used.

Nomenclature: The manufacturer designated the combination of subwoofer and satellites with System.X, i.e. System.One for the large system, System.Two for the medium-sized system and System.Three for the small system. The subwoofers were designated with .1, the satellites with .2, i.e. System.One.1 for the large subwoofers and System.Three.2 for the smallest satellites. The MK-I version was developed by Mr. Karl-Heinz Fink, the MK-II version was developed by Mr. Manfred Diestertich, now with Audiophysic. The crossover modules of the two versions differ in their practicality in that the modules of the MK I version could be switched off. Thus it was possible to listen in the evening without subwoofer via the satellites in the full range. This is not possible with the MK II. Here you have to reconnect. In the MK II version of the subwoofer electronics there is a jumper that overrides the built-in filter. This means that the woofers of the System.One, -.Two and -.Three versions can be operated universally as subwoofers with an external woofer crossover or via an AV receiver.

Notes[edit]

Other models in the same series:

Pictures[edit]

systemoneseite1mittel.jpg

  • You can see the System.One MKII version by Manfred Diestertich with the SEAS tweeters, the newer power amps and the Chitin drivers.

systemonetwo.jpg

  • Here the combination of System.One MKII satellites and the System.Two subwoofers

Reviews[edit]

  • Test result of the I.Q System.One MKII (with chitin membrane satellites) in HIFI-VISION:
    • "No question, their over-all qualities stamp I.Q's energy concert center as the reference in the truest sense of the word: precisely, the evaluation standard for judging loudspeakers."

testprofilqa5.jpg

  • Test result of the I.Q System.One MKI (with polyprop satellites) in AUDIO:

91 points, reference class 5 ears

Links[edit]

  • For service requests: info@IQSystemOne.de