Difference between revisions of "Kenwood KX-5060 S"
(→Bemerkungen) |
(→Daten) |
||
| (One intermediate revision by the same user not shown) | |||
| Line 1: | Line 1: | ||
__NOTOC__ | __NOTOC__ | ||
| − | == | + | == Data == |
| − | {{ | + | {{navigation}} |
| − | ''' | + | '''General''' |
| − | * | + | * Manufacturer: [[Kenwood]] |
| − | * | + | * Model: KX-5060 S (with Dolby S) |
| − | * | + | * Type: CC-cassette tape deck |
| − | * | + | * Years of manufacture: 1994 - 1996 |
| − | * | + | * Made in: Japan |
| − | * | + | * Color: Black |
| − | * | + | * Power supply: 220 V / 50 Hz |
| − | * | + | * Power consumption: 25 W / 8.3 W (standby, according to Stereoplay 10/95, p.68) |
| − | * | + | * Dimensions: 440 x 127 x 276 mm (WxHxD) |
| − | * | + | * Weight: 4,4 kg |
| − | * | + | * Original price: 599 DM (equivalent to approx. 306 EUR) |
| − | ''' | + | '''Technical Data''' |
| − | * | + | * HF premagnetization: 105 kHz |
| − | ** Line (Cinch) | + | * 2 tone heads (A/W Hartpermally, erase head double gap ferrite) |
| − | * | + | * 3 motors (electronically controlled DC rotors) |
| − | ** Line ( | + | * Synchronous fluctuations: 0.06% (WRMS) / +/-0.16% (DIN) / 0.095 % (2-sigma-weighted, Ang. according to Stereoplay 10/95, p.68). |
| − | ** | + | * Band types: IEC Type I (Fe), IEC Type II (Cr), IEC Type IV (Me). |
| + | * Frequency response: | ||
| + | ** Type I: 20 Hz - 18 kHz +/-3dB | ||
| + | Type II: 20 Hz - 18 kHz +/-3dB | ||
| + | Type IV: 20 Hz - 19 kHz +/-3dB | ||
| + | * Distortion factor: < 1.7 % (315 Hz) | ||
| + | * Signal-to-noise ratio (Type IV): | ||
| + | ** with Dolby S: 80 dB | ||
| + | ** with Dolby C: 74 dB | ||
| + | ** with Dolby B: 67 dB | ||
| + | ** without Dolby: 58 dB | ||
| + | * Input sensitivity/impedance: | ||
| + | ** Line (RCA/Cinch) = 100 mV / 47 kOhm | ||
| + | * Output level/impedance: | ||
| + | ** Line (RCA/RCA) = 775 mV / 1 kOhm. | ||
| + | ** Headphones (6.35 mm jack) = 0.9 mW / 32 Ohm | ||
| − | ''' | + | '''Special Features''' |
| − | * | + | * Full logic control |
| − | * | + | * Tape calibration with 400Hz and 10kHz test tones (automatic calibration ATCS) |
| − | * | + | * 3 storable calibration settings |
| − | * | + | * Noise reduction with Dolby B, C and S, dynamic extension HX-Pro. |
| − | * | + | * Multiplex filter (MPX) |
| − | * | + | * Timer recording and playback |
| − | * | + | * Display can be switched off |
| − | * | + | * Linear time counter - display switchable to counter-only display |
| − | * | + | * Motor-driven cassette compartment |
| − | * | + | * Automatic tape tensioner |
| − | + | * "CD Peak Search" - Function (CDPS) | |
| − | + | * Repeat playback | |
| − | + | * A-B sequence repeat | |
| − | + | * Automatic track play "Index Scan" * Remote control via Kenwood system bus | |
| − | + | * Remote control via Kenwood system bus | |
| − | |||
| − | * | ||
| − | * | ||
| − | * | ||
| − | * | ||
| − | * | ||
| − | |||
| − | + | == Remarks == | |
| − | + | Other models of the same series: | |
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | == | ||
| − | |||
* [[Kenwood KX-3060|KX-3060]] | * [[Kenwood KX-3060|KX-3060]] | ||
| Line 76: | Line 63: | ||
* [[Kenwood KX-7060 S|KX-7060 S]] | * [[Kenwood KX-7060 S|KX-7060 S]] | ||
| − | + | Previous model: [[Kenwood KX-5050|KX-5050]] (without Dolby S) | |
| − | + | Successor model: [[Kenwood KX-5080 S|KX-5080 S]] | |
| − | == | + | == Pictures == |
| − | * | + | * Excerpt from Kenwood brochure Hifi '95 |
| − | [[ | + | [[File:Kenwood_KX-5060S_(Hifi_95).jpg]] |
| − | == | + | == Reports == |
| − | * Stereoplay 10/1995: | + | * Stereoplay 10/1995: Top class III, price-performance: very good. "Comfortably equipped Dolby S- recorder with good sound characteristics" (p.68). |
| − | + | Stereo 3/1995: Very good, 2 stars. "No rear band control, but Dolby S - high quality drive with smooth sound." | |
== Links == | == Links == | ||
| − | * | + | * Prospectus in the Kenwood archives: [https://www.kenwood.de/WebFiles/File/de/download/archive/kx5060.pdf] |
| − | [[ | + | [[Category:Cassette Decks]] |
| − | [[ | + | [[Category:Dolby-S]] |
Latest revision as of 11:14, 16 February 2021
Data[edit]
General
- Manufacturer: Kenwood
- Model: KX-5060 S (with Dolby S)
- Type: CC-cassette tape deck
- Years of manufacture: 1994 - 1996
- Made in: Japan
- Color: Black
- Power supply: 220 V / 50 Hz
- Power consumption: 25 W / 8.3 W (standby, according to Stereoplay 10/95, p.68)
- Dimensions: 440 x 127 x 276 mm (WxHxD)
- Weight: 4,4 kg
- Original price: 599 DM (equivalent to approx. 306 EUR)
Technical Data
- HF premagnetization: 105 kHz
- 2 tone heads (A/W Hartpermally, erase head double gap ferrite)
- 3 motors (electronically controlled DC rotors)
- Synchronous fluctuations: 0.06% (WRMS) / +/-0.16% (DIN) / 0.095 % (2-sigma-weighted, Ang. according to Stereoplay 10/95, p.68).
- Band types: IEC Type I (Fe), IEC Type II (Cr), IEC Type IV (Me).
- Frequency response:
- Type I: 20 Hz - 18 kHz +/-3dB
Type II: 20 Hz - 18 kHz +/-3dB Type IV: 20 Hz - 19 kHz +/-3dB
- Distortion factor: < 1.7 % (315 Hz)
- Signal-to-noise ratio (Type IV):
- with Dolby S: 80 dB
- with Dolby C: 74 dB
- with Dolby B: 67 dB
- without Dolby: 58 dB
- Input sensitivity/impedance:
- Line (RCA/Cinch) = 100 mV / 47 kOhm
- Output level/impedance:
- Line (RCA/RCA) = 775 mV / 1 kOhm.
- Headphones (6.35 mm jack) = 0.9 mW / 32 Ohm
Special Features
- Full logic control
- Tape calibration with 400Hz and 10kHz test tones (automatic calibration ATCS)
- 3 storable calibration settings
- Noise reduction with Dolby B, C and S, dynamic extension HX-Pro.
- Multiplex filter (MPX)
- Timer recording and playback
- Display can be switched off
- Linear time counter - display switchable to counter-only display
- Motor-driven cassette compartment
- Automatic tape tensioner
- "CD Peak Search" - Function (CDPS)
- Repeat playback
- A-B sequence repeat
- Automatic track play "Index Scan" * Remote control via Kenwood system bus
- Remote control via Kenwood system bus
Remarks[edit]
Other models of the same series:
Previous model: KX-5050 (without Dolby S)
Successor model: KX-5080 S
Pictures[edit]
- Excerpt from Kenwood brochure Hifi '95
.jpg)
Reports[edit]
- Stereoplay 10/1995: Top class III, price-performance: very good. "Comfortably equipped Dolby S- recorder with good sound characteristics" (p.68).
Stereo 3/1995: Very good, 2 stars. "No rear band control, but Dolby S - high quality drive with smooth sound."
Links[edit]
- Prospectus in the Kenwood archives: [1]