Difference between revisions of "Scan-Dyna A-25"
| (3 intermediate revisions by the same user not shown) | |||
| Line 1: | Line 1: | ||
__NOTOC__ | __NOTOC__ | ||
| − | == | + | == Data == |
| − | {{ | + | {{navigation}} |
| − | ''' | + | '''General''' |
| − | * | + | * Manufacturer: [[Scan-Dyna]] |
| − | * | + | * Model: A-25 |
| − | * | + | * Type: Loudspeaker |
| − | * | + | * Years of manufacture: 1968 - 1974 |
| − | * | + | * Made in: Denmark |
| − | * | + | * Colour: Walnut |
| − | * | + | * Dimensions: 290 x 500 x 250 mm (WxHxD) |
| − | * | + | * Weight: 9 kg |
| − | * | + | * Original price approx.: 345 DM |
| − | ''' | + | '''Technical data:''' |
| − | * | + | * Construction: 2-way aperiodic (half-open, "Acoustic Resistor" / "Resistive Port/Vent" like [[Dynaudio Variovent]]) |
| − | * | + | * drivers: |
| − | ** | + | ** woofer: 250 mm cone, SEAS H-336 (according to surround) / type 25TV-EM (according to label), 4 Ohm. |
| − | ** | + | ** midrange driver: |
| − | ** | + | ** tweeter: 40 mm dome, SEAS H-087, 6 Ohm (measured: 4.8 Ohm). |
| − | + | Power handling (nominal/music): 35 W / 90 W | |
| − | + | efficiency: 88 dB / W / m | |
| − | * | + | * Frequency response: 32 - 20'000 Hz |
| − | * | + | * Crossover: 1'500 Hz |
| − | * | + | * Impedance: 4 Ohm |
| − | ''' | + | '''Special Features''' |
| − | * | + | * Aperiodic damping system |
| − | * | + | * Removable front |
| − | * | + | * Height adjustment of 5 positions for listening room adaptation with the following features: |
| − | ** 1) | + | ** 1) Low boost |
| − | ** 2) | + | ** 2) Linear frequency response |
| − | ** 3) | + | ** 3) Weak damping - Described as normal (probably means typical listening room) |
| − | ** 4) | + | ** 4) Slightly stronger damping for "hard" rooms |
| − | + | 5) Strong damping | |
| − | == | + | == Remarks == |
| − | * | + | * Other models in the same series: |
* Receiver: | * Receiver: | ||
* [[Scan-Dyna 2000]] | * [[Scan-Dyna 2000]] | ||
| Line 47: | Line 47: | ||
| − | * | + | * [[Record Player]] |
* [[Scan-Dyna 1400]] | * [[Scan-Dyna 1400]] | ||
* [[Scan-Dyna 1700]] | * [[Scan-Dyna 1700]] | ||
| − | * | + | * Speakers: |
* [[Scan-Dyna A-10]] | * [[Scan-Dyna A-10]] | ||
* [[Scan-Dyna A-20]] | * [[Scan-Dyna A-20]] | ||
| Line 61: | Line 61: | ||
| − | * | + | * [[Headphones: |
* [[Scan-Dyna K-72x]] | * [[Scan-Dyna K-72x]] | ||
| − | == | + | == Pictures == |
| − | * | + | * Picture: Scan-Dyna 3000, A-25 |
| − | [[ | + | [[File:Scan-Dyna 3000-A-25-1973.jpg]] |
| − | * | + | * Excerpt from brochure: Scan-Dyna A-10, A-20, A-25, A-30 |
| + | [[File:Scan-Dyna A-10-20-25-30-Prospekt-1973.jpg]] | ||
| + | |||
| + | |||
| + | * Picture / Scheme: Scan-Dyna A-25 | ||
<gallery> | <gallery> | ||
A25.jpg | A25.jpg | ||
| Line 77: | Line 81: | ||
| − | == | + | == Reports == |
| − | + | Aperiodic: Manufacturer's Comment (from article by J. Gordon Holt, Dec. 1, 1969; about the first A25 version) | |
| − | + | The aperiodic design is not a bass-reflex approach, since there is no acoustic output through the port. The characteristics of the "plug" in the port are quite critical, necessitating individual adjustment of each system. This added acoustical impedance damps the woofer, improving its response to transient signals. Examination of the woofer cone motion shows that, with this aperiodic design (on which patents are pending), the cone follows the input signal all the way down to DC with far greater precision than is the case with either bass-reflex or acoustic-suspension designs. Dynaco | |
| − | The aperiodic design is not a bass-reflex approach, since there is no acoustic output through the port. The characteristics of the "plug" in the port are quite critical, necessitating individual adjustment of each system. This added acoustical impedance damps the woofer, improving its response to transient signals. Examination of the woofer cone motion shows that, with this aperiodic design (on which patents are pending), the cone follows the input signal all the way down to DC with far greater precision than is the case with either bass-reflex or acoustic-suspension designs. | + | |
| − | * | + | |
| + | * Dynaudio called this design [[Dynaudio Variovent]] and at Scan-Speak it was "Flow Resistance Vent". | ||
| Line 90: | Line 95: | ||
| − | [[ | + | [[Category:Loudspeaker]] |
Latest revision as of 10:53, 4 January 2021
Data[edit]
General
- Manufacturer: Scan-Dyna
- Model: A-25
- Type: Loudspeaker
- Years of manufacture: 1968 - 1974
- Made in: Denmark
- Colour: Walnut
- Dimensions: 290 x 500 x 250 mm (WxHxD)
- Weight: 9 kg
- Original price approx.: 345 DM
Technical data:
- Construction: 2-way aperiodic (half-open, "Acoustic Resistor" / "Resistive Port/Vent" like Dynaudio Variovent)
- drivers:
- woofer: 250 mm cone, SEAS H-336 (according to surround) / type 25TV-EM (according to label), 4 Ohm.
- midrange driver:
- tweeter: 40 mm dome, SEAS H-087, 6 Ohm (measured: 4.8 Ohm).
Power handling (nominal/music): 35 W / 90 W efficiency: 88 dB / W / m
- Frequency response: 32 - 20'000 Hz
- Crossover: 1'500 Hz
- Impedance: 4 Ohm
Special Features
- Aperiodic damping system
- Removable front
- Height adjustment of 5 positions for listening room adaptation with the following features:
- 1) Low boost
- 2) Linear frequency response
- 3) Weak damping - Described as normal (probably means typical listening room)
- 4) Slightly stronger damping for "hard" rooms
5) Strong damping
Remarks[edit]
- Other models in the same series:
- Receiver:
- Scan-Dyna 2000
- Scan-Dyna 2400
- Scan-Dyna 3000
- Scan-Dyna 4000
- Speakers:
- Scan-Dyna A-10
- Scan-Dyna A-20
- Scan-Dyna A-25
- Scan-Dyna A-25 II
- Scan-Dyna A-30
- Scan-Dyna A-30 II
- [[Headphones:
- Scan-Dyna K-72x
Pictures[edit]
- Picture: Scan-Dyna 3000, A-25
- Excerpt from brochure: Scan-Dyna A-10, A-20, A-25, A-30
- Picture / Scheme: Scan-Dyna A-25
Reports[edit]
Aperiodic: Manufacturer's Comment (from article by J. Gordon Holt, Dec. 1, 1969; about the first A25 version) The aperiodic design is not a bass-reflex approach, since there is no acoustic output through the port. The characteristics of the "plug" in the port are quite critical, necessitating individual adjustment of each system. This added acoustical impedance damps the woofer, improving its response to transient signals. Examination of the woofer cone motion shows that, with this aperiodic design (on which patents are pending), the cone follows the input signal all the way down to DC with far greater precision than is the case with either bass-reflex or acoustic-suspension designs. Dynaco
- Dynaudio called this design Dynaudio Variovent and at Scan-Speak it was "Flow Resistance Vent".