Difference between revisions of "Kenwood KA-2600"
Frank Brando (talk | contribs) (→Bemerkungen) |
Frank Brando (talk | contribs) (→Bemerkungen) |
||
(One intermediate revision by the same user not shown) | |||
Line 1: | Line 1: | ||
__NOTOC__ | __NOTOC__ | ||
− | == | + | == Data == |
− | {{ | + | {{navigation}} |
− | ''' | + | '''General''' |
− | * | + | * Manufacturer: [[Kenwood]] |
− | * | + | * Model: KA-2600 |
− | * | + | * Years of manufacture: 1968 - 1971 |
− | * | + | * Made in: Japan |
− | * | + | * Color: Silver, wood side panels |
− | * | + | * Type: Amplifier |
− | * | + | * Power consumption: 110 W at full output, 15 W without signal |
− | * | + | * Dimensions (WxHxD): 408 x 134 x 280 mm |
− | * | + | * Weight: 7,5 Kg |
− | * | + | * Original price approx.: 37500 Yen (Japan, 1969), 600 DM |
− | ''' | + | '''Connections''' |
− | * | + | * Inputs: |
− | ** | + | ** Input sensitivity: |
− | ** Phono 1 MM: 2 mV, 50 kOhm, max. 180 mV | + | ** Phono 1 MM: 2 mV, 50 kOhm, max. 180 mV. |
** Phono 2 MM: 2 mV, 50 kOhm, max. 180 mV | ** Phono 2 MM: 2 mV, 50 kOhm, max. 180 mV | ||
− | ** | + | ** Microphone: 2 mV, 100 kOhm |
** Tuner: 200mV, 50 kOhm | ** Tuner: 200mV, 50 kOhm | ||
− | + | AUX: 200mV, 50 kOhm | |
** Tape Play: 200mV, 50 kOhm | ** Tape Play: 200mV, 50 kOhm | ||
*** Tape DIN: | *** Tape DIN: | ||
** Main In: 100 mV, 100 kOhm | ** Main In: 100 mV, 100 kOhm | ||
− | * | + | * Outputs: |
** Tape Rec: 200 mV | ** Tape Rec: 200 mV | ||
*** DIN: 40 mV | *** DIN: 40 mV | ||
*** Dubbing: 200 mV | *** Dubbing: 200 mV | ||
** Pre-Out: | ** Pre-Out: | ||
− | ** | + | ** Headphones: |
− | ** | + | ** Connectors for 2 pairs of speakers |
− | ''' | + | '''Technical Data''' |
− | * | + | * Continuous power (at THD) |
− | ** 8 Ohm: 2x24 W (RMS, 20Hz...20Khz, 0 | + | ** 8 Ohm: 2x24 W (RMS, 20Hz...20Khz, 0.05% THD), 2x 18W (8 Ohm, 1Khz) |
** 4 Ohm: 2x33 W | ** 4 Ohm: 2x33 W | ||
− | * | + | * Dynamic power |
** 8 Ohm: 55 W IHF | ** 8 Ohm: 55 W IHF | ||
** 4 Ohm: 70 W IHF | ** 4 Ohm: 70 W IHF | ||
− | * | + | * Total harmonic distortion: 0.5% THD at rated power from 20 - 20000 Hz |
− | * | + | * Attenuation factor: 56 at 8 Ohm |
− | * | + | * Frequency response: 15 - 70,000 Hz, ± 1 dB |
− | * | + | * Power bandwidth: 15 - 70,000 Hz, - 3 dB |
− | * | + | * Signal-to-noise ratio: |
** Phono: 65 dB | ** Phono: 65 dB | ||
− | ** | + | ** Microphone: 65 dB |
** Tuner: 80 dB | ** Tuner: 80 dB | ||
** AUX: 80 dB | ** AUX: 80 dB | ||
** Tape Play: 80 dB | ** Tape Play: 80 dB | ||
− | * | + | * Tone control |
− | + | Bass: ± 10 dB at 100 Hz | |
− | + | Treble: ± 10 dB at 10 Khz | |
− | * Loudness: + 10 dB | + | * Loudness: + 10 dB at 100 Hz, + 5 dB at 10 kHz |
− | * High Filter: 6dB/ | + | * High Filter: 6dB/oct. at 8kHz |
− | * Low Filter: 6dB/ | + | * Low Filter: 6dB/oct. at 80Hz |
− | + | Muting: 0 dB, - 20 dB | |
− | ''' | + | '''Special Features''' |
− | * | + | * Pre- and power amplifier separable |
− | * Mono / Stereo | + | * Mono / Stereo switch |
− | * Mono | + | * Mono center channel output |
− | * Tape | + | * Tape dubbing 6.3mm jack connector on front panel |
− | == | + | == Remarks == |
− | * | + | * Other models in the same series: |
** Kenwood KA-2600: | ** Kenwood KA-2600: | ||
*** [[Kenwood KA-2600|KA-2600]] | *** [[Kenwood KA-2600|KA-2600]] | ||
Line 77: | Line 77: | ||
− | * | + | * Predecessor model: |
+ | ** Predecessor model | ||
+ | |||
+ | * Successor model: | ||
+ | ** Trio KA-3002; Based on current sources, probably manufactured exclusively under Trio (for the Japanese possibly US market?): | ||
+ | *** [[Kenwood KA-3002|KA-3002]] | ||
+ | ** Kenwood KA-4002 (New Designline): | ||
+ | *** [[Kenwood KA-4002|KA-4002]] | ||
+ | |||
+ | |||
+ | * Corresponding tuners: | ||
** Kenwood KT-5000 | ** Kenwood KT-5000 | ||
*** [[Kenwood KT-5000|KT-5000]] | *** [[Kenwood KT-5000|KT-5000]] | ||
Line 84: | Line 94: | ||
− | * Kenwood | + | * [[Kenwood recommended: |
− | ** | + | ** Kenwood KF-8011 denoiser |
*** [[Kenwood KF-8011|KF-8011]] | *** [[Kenwood KF-8011|KF-8011]] | ||
− | ** | + | ** Kenwood KC-6060 oscilloscope |
*** [[Kenwood KC-6060|KC-6060]] | *** [[Kenwood KC-6060|KC-6060]] | ||
− | ** | + | ** Kenwood KC-6060 A oscilloscope (successor model available from 1971 onwards) |
*** [[Kenwood KC-6060 A|KC-6060 A]] | *** [[Kenwood KC-6060 A|KC-6060 A]] | ||
− | * | + | * The units were sold outside Japan under the "brand name" Kenwood. In Japan and partly in other markets the company name Trio was used. Renaming to Kenwood Corporation did not occur until 1986 (source Wikipedia). |
− | == | + | == Pictures == |
− | * | + | * Picture: Kenwood KA-2600 |
− | [[ | + | [[File:KA-2600-1.jpg]] |
− | * | + | * Picture: Kenwood Combi KA-2600 / KT-5000 |
− | [[ | + | [[File:KA-2600-KT-5000-1.jpg]] |
− | == | + | == Reports == |
== Links == | == Links == | ||
− | * | + | * External link: Audio Heritage, Japan website: [http://audio-heritage.jp/TRIO-KENWOOD/amp/ka-2600.html] |
− | [[ | + | [[Category:Integrated amplifier]] |
Latest revision as of 04:53, 22 December 2020
Data[edit]
General
- Manufacturer: Kenwood
- Model: KA-2600
- Years of manufacture: 1968 - 1971
- Made in: Japan
- Color: Silver, wood side panels
- Type: Amplifier
- Power consumption: 110 W at full output, 15 W without signal
- Dimensions (WxHxD): 408 x 134 x 280 mm
- Weight: 7,5 Kg
- Original price approx.: 37500 Yen (Japan, 1969), 600 DM
Connections
- Inputs:
- Input sensitivity:
- Phono 1 MM: 2 mV, 50 kOhm, max. 180 mV.
- Phono 2 MM: 2 mV, 50 kOhm, max. 180 mV
- Microphone: 2 mV, 100 kOhm
- Tuner: 200mV, 50 kOhm
AUX: 200mV, 50 kOhm
- Tape Play: 200mV, 50 kOhm
- Tape DIN:
- Main In: 100 mV, 100 kOhm
- Tape Play: 200mV, 50 kOhm
- Outputs:
- Tape Rec: 200 mV
- DIN: 40 mV
- Dubbing: 200 mV
- Pre-Out:
- Headphones:
- Connectors for 2 pairs of speakers
- Tape Rec: 200 mV
Technical Data
- Continuous power (at THD)
- 8 Ohm: 2x24 W (RMS, 20Hz...20Khz, 0.05% THD), 2x 18W (8 Ohm, 1Khz)
- 4 Ohm: 2x33 W
- Dynamic power
- 8 Ohm: 55 W IHF
- 4 Ohm: 70 W IHF
- Total harmonic distortion: 0.5% THD at rated power from 20 - 20000 Hz
- Attenuation factor: 56 at 8 Ohm
- Frequency response: 15 - 70,000 Hz, ± 1 dB
- Power bandwidth: 15 - 70,000 Hz, - 3 dB
- Signal-to-noise ratio:
- Phono: 65 dB
- Microphone: 65 dB
- Tuner: 80 dB
- AUX: 80 dB
- Tape Play: 80 dB
- Tone control
Bass: ± 10 dB at 100 Hz Treble: ± 10 dB at 10 Khz
- Loudness: + 10 dB at 100 Hz, + 5 dB at 10 kHz
- High Filter: 6dB/oct. at 8kHz
- Low Filter: 6dB/oct. at 80Hz
Muting: 0 dB, - 20 dB
Special Features
- Pre- and power amplifier separable
- Mono / Stereo switch
- Mono center channel output
- Tape dubbing 6.3mm jack connector on front panel
Remarks[edit]
- Other models in the same series:
- Predecessor model:
- Predecessor model
- Successor model:
- [[Kenwood recommended:
- The units were sold outside Japan under the "brand name" Kenwood. In Japan and partly in other markets the company name Trio was used. Renaming to Kenwood Corporation did not occur until 1986 (source Wikipedia).
Pictures[edit]
- Picture: Kenwood KA-2600
- Picture: Kenwood Combi KA-2600 / KT-5000
Reports[edit]
Links[edit]
- External link: Audio Heritage, Japan website: [1]