Difference between revisions of "Dual CS 1249"
| Line 1: | Line 1: | ||
__NOTOC__ | __NOTOC__ | ||
| − | == | + | == Data == |
| − | {{ | + | {{navigation}} |
| − | ''' | + | '''General''' |
| − | * | + | * Manufacturer: [[Dual]] |
| − | * | + | * Model: CS 1249 |
| − | * | + | * Type: Record changer |
| − | * | + | * Years of manufacture: 1975 - 1978 |
| − | * | + | * Made in: Germany |
| − | * | + | * Color: Black, Walnut, White |
| − | * | + | * Power consumption: 10 Watt |
| − | * | + | * Dimensions: 420 x 148 x 365 mm (WxHxD) |
| − | * | + | * Weight: 7.6 kg |
| − | * | + | * Original price approx.: 698 DM |
| − | ''' | + | '''Connections''' |
| − | * | + | * Outputs: 1 DIN 5pol. convertible also Cinch + ground |
| − | ''' | + | '''Technical Data Drive''' |
| − | * | + | * Drive: 8pin AC synchronous motor (Dual SM-840) |
| − | * | + | * Speed: 33 1/3 & 45 rpm |
| − | * | + | * Synchronous speed fluctuation: +/- 0,055 % (measured) |
| − | * | + | * Rumble noise ratio: unweighted: -45 dB, weighted: -67 dB (measured) |
| − | * | + | * Turntable: Non-magnetic,dynamically balanced,305 mm, 1,3 kg |
| − | * | + | * Rotational mass : 2,1kG incl. sub platter |
| − | * | + | * Operating mode: Belt |
* Pitch: ±6% | * Pitch: ±6% | ||
| − | ''' | + | '''Technical data tonearm''' |
| − | * | + | * Cardanic mounted straight aluminium tube tonearm |
| − | * | + | * Effective length: 222mm |
| − | + | Centre distance (platter bearing to tonearm pivot axis): 203mm | |
| − | * | + | * Offset angle: 25,33 degrees |
| − | * | + | * Tangential tracking error angle: 0.16 degrees/cm |
| − | * | + | * Overhang: 16mm |
| − | * | + | * Overhang range: ~ 5mm |
| − | * | + | * Effective mass: ~12 gr. incl. TC |
| − | * | + | * Bearing friction: max. 0.07mN vert./0.16mN hor. |
| − | * | + | * Pickup ex works: Shure DM 103 ME |
| − | * 1. vert. | + | * 1. vert. Eigenresonance with it: ~ 6Hz |
| − | * | + | * Pickup is exchangeable: yes, with subheadshell e.g. TK24 |
| − | ''' | + | '''Special Features''' |
| − | * | + | * Height-adjustable tone arm for changer operation |
| − | * | + | * External stroboscopic lamp |
| − | * | + | * Automatic continuous playback |
| − | * Subchassis | + | * Subchassis suspension |
| − | * | + | * Counter oscillator in the counterweight of the tonearm |
| − | * | + | * Adjustable pick-up and lift-off points of the tonearm |
| − | * | + | * Manual operation with touchdown aid |
| − | * | + | * Adjustable lift height |
| − | == | + | == Remarks == |
| − | + | The 1249 has the same "Flywheel" belt drive with a sub-disc (ALU) attached to the axle and a turntable resting on it as the older 601 single player. | |
| − | + | However, it has a weaker platter bearing due to the interchangeable axle. | |
| − | + | Also, the zinc die-cast of the 601 has given way to the aluminium die-cast of the 1249. | |
| − | + | The tonearm of the 1249 has been reworked compared to the 601 and has a very low bearing friction and a counter-oscillator in the counterweight, which allows a high scanning capability and safe scanning even of cartridges that actually require a tonearm with a lower effective mass for optimal operation. | |
| − | * | + | * Like all pre-ULM arms ('''U'''ltra '''L'''ow '''M'''ass) from Dual, the arm of the 1249 belongs to the lighter medium weight arms with an effective mass of ~ 12gr. including subheadshell (TK). |
| − | * | + | * The motor is an 8-pole AC synchronous motor without servo electronics (SM840). |
| − | + | The speed fine adjustment is done mechanically by spreading a slotted drive roller and is very sensitive. | |
| − | * | + | * Drive and tone arm are qualitatively superior to current Dual models (CS-455,505-4). |
| − | * | + | * The factory-installed pickup was chosen with consideration of the change function and is clearly below the capabilities of the device. |
| − | * | + | * When used as a single player, it is essential to install a higher quality cartridge. |
| − | * | + | * Even MCs are no problem as long as they are not explicitly designed for heavy arms. |
| − | * | + | * A few years ago still a bargain, he now achieves quite handsome prices in the second-hand market. |
| − | == | + | == Pictures == |
| − | * | + | * Picture: Dual CS 1249 |
| − | [[ | + | [[File:Dual CS 1249.jpg]] |
| − | * | + | * Excerpt from brochure: Dual CS 1249 |
| − | [[ | + | [[File:Dual CS-1249-Prospekt-1.jpg]] |
| − | == | + | == Reports == |
| Line 86: | Line 86: | ||
| − | [[ | + | [[Category:Plate changer]] |
Latest revision as of 09:34, 11 May 2021
Data[edit]
General
- Manufacturer: Dual
- Model: CS 1249
- Type: Record changer
- Years of manufacture: 1975 - 1978
- Made in: Germany
- Color: Black, Walnut, White
- Power consumption: 10 Watt
- Dimensions: 420 x 148 x 365 mm (WxHxD)
- Weight: 7.6 kg
- Original price approx.: 698 DM
Connections
- Outputs: 1 DIN 5pol. convertible also Cinch + ground
Technical Data Drive
- Drive: 8pin AC synchronous motor (Dual SM-840)
- Speed: 33 1/3 & 45 rpm
- Synchronous speed fluctuation: +/- 0,055 % (measured)
- Rumble noise ratio: unweighted: -45 dB, weighted: -67 dB (measured)
- Turntable: Non-magnetic,dynamically balanced,305 mm, 1,3 kg
- Rotational mass : 2,1kG incl. sub platter
- Operating mode: Belt
- Pitch: ±6%
Technical data tonearm
- Cardanic mounted straight aluminium tube tonearm
- Effective length: 222mm
Centre distance (platter bearing to tonearm pivot axis): 203mm
- Offset angle: 25,33 degrees
- Tangential tracking error angle: 0.16 degrees/cm
- Overhang: 16mm
- Overhang range: ~ 5mm
- Effective mass: ~12 gr. incl. TC
- Bearing friction: max. 0.07mN vert./0.16mN hor.
- Pickup ex works: Shure DM 103 ME
- 1. vert. Eigenresonance with it: ~ 6Hz
- Pickup is exchangeable: yes, with subheadshell e.g. TK24
Special Features
- Height-adjustable tone arm for changer operation
- External stroboscopic lamp
- Automatic continuous playback
- Subchassis suspension
- Counter oscillator in the counterweight of the tonearm
- Adjustable pick-up and lift-off points of the tonearm
- Manual operation with touchdown aid
- Adjustable lift height
Remarks[edit]
The 1249 has the same "Flywheel" belt drive with a sub-disc (ALU) attached to the axle and a turntable resting on it as the older 601 single player. However, it has a weaker platter bearing due to the interchangeable axle. Also, the zinc die-cast of the 601 has given way to the aluminium die-cast of the 1249. The tonearm of the 1249 has been reworked compared to the 601 and has a very low bearing friction and a counter-oscillator in the counterweight, which allows a high scanning capability and safe scanning even of cartridges that actually require a tonearm with a lower effective mass for optimal operation.
- Like all pre-ULM arms (Ultra Low Mass) from Dual, the arm of the 1249 belongs to the lighter medium weight arms with an effective mass of ~ 12gr. including subheadshell (TK).
- The motor is an 8-pole AC synchronous motor without servo electronics (SM840).
The speed fine adjustment is done mechanically by spreading a slotted drive roller and is very sensitive.
- Drive and tone arm are qualitatively superior to current Dual models (CS-455,505-4).
- The factory-installed pickup was chosen with consideration of the change function and is clearly below the capabilities of the device.
- When used as a single player, it is essential to install a higher quality cartridge.
- Even MCs are no problem as long as they are not explicitly designed for heavy arms.
- A few years ago still a bargain, he now achieves quite handsome prices in the second-hand market.
Pictures[edit]
- Picture: Dual CS 1249
- Excerpt from brochure: Dual CS 1249
