Difference between revisions of "ADC XLM Mk. II"
| (8 intermediate revisions by the same user not shown) | |||
| Line 1: | Line 1: | ||
__NOTOC__ | __NOTOC__ | ||
| − | == | + | == Data == |
| − | {{ | + | {{navigation}} |
| − | ''' | + | '''General''' |
| − | * | + | * Manufacturer: [[ADC]] |
| − | * | + | * Model: XLM Mk. II |
| − | * | + | * Type: Pickup |
| − | * | + | * Years of manufacture: 1975 - 1978 |
| − | * | + | * Made in: USA |
| − | * | + | * Color: system body gold, needle carrier black |
| − | * | + | * Weight: 5,75 g |
| − | * | + | * Original price approx.: 198 DM |
| − | ''' | + | '''Technical Data''' |
| − | * | + | * Principle: Induced Magnet (Moving Iron, connection as MM) |
| − | * | + | * Frequency response: 15 - 24,000 Hz (±1.5 dB) |
| − | * | + | * Channel separation: 28 dB |
| − | * | + | * Channel balance: |
| − | * | + | * Crosstalk attenuation: |
| − | * | + | * Output voltage: 0.9 mV / cm / s |
| − | * | + | * Terminating resistor: 625 Ohm |
| − | * | + | * Induction: 350mHy |
| − | * | + | * Needle type: elliptical (0.008 mm x 0.018 mm) |
| − | * | + | * Recommended contact force: 0.75 - 1.5 p |
| − | * | + | * Needle compliance: 50µm |
| − | == | + | == Remarks == |
| − | * | + | * Other models in the same series: |
| − | * | + | * Pickups: |
| + | * [[ADC P30]] | ||
| + | * [[ADC P32]] | ||
| + | * [[ADC P36]] | ||
* [[ADC QLM 30 Mk. II]] | * [[ADC QLM 30 Mk. II]] | ||
* [[ADC QLM 32 Mk. II]] | * [[ADC QLM 32 Mk. II]] | ||
| − | |||
* [[ADC QLM 36 Mk. II]] | * [[ADC QLM 36 Mk. II]] | ||
* [[ADC VLM Mk. II]] | * [[ADC VLM Mk. II]] | ||
* [[ADC XLM Mk. II]] | * [[ADC XLM Mk. II]] | ||
| + | * [[ADC Super XLM Mk. II]] | ||
| − | * | + | * [[Tonearms: |
* [[ADC LMF 1]] | * [[ADC LMF 1]] | ||
* [[ADC LMF 2]] | * [[ADC LMF 2]] | ||
| − | == | + | == Pictures == |
| − | * | + | * Extract from brochure: P, QLM II, VLM II, XLM II pickups |
| − | [[ | + | [[File:ADC P-QLM-VLM-XLM II-Prospekt-1977.jpg]] |
| − | == | + | == Reports == |
| + | * Report in "FonoForum" 6 / 1975 | ||
| Line 54: | Line 58: | ||
| − | [[ | + | [[Category:Pickups]] |
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
Latest revision as of 08:12, 5 April 2020
Data[edit]
General
- Manufacturer: ADC
- Model: XLM Mk. II
- Type: Pickup
- Years of manufacture: 1975 - 1978
- Made in: USA
- Color: system body gold, needle carrier black
- Weight: 5,75 g
- Original price approx.: 198 DM
Technical Data
- Principle: Induced Magnet (Moving Iron, connection as MM)
- Frequency response: 15 - 24,000 Hz (±1.5 dB)
- Channel separation: 28 dB
- Channel balance:
- Crosstalk attenuation:
- Output voltage: 0.9 mV / cm / s
- Terminating resistor: 625 Ohm
- Induction: 350mHy
- Needle type: elliptical (0.008 mm x 0.018 mm)
- Recommended contact force: 0.75 - 1.5 p
- Needle compliance: 50µm
Remarks[edit]
- Other models in the same series:
- Pickups:
- ADC P30
- ADC P32
- ADC P36
- ADC QLM 30 Mk. II
- ADC QLM 32 Mk. II
- ADC QLM 36 Mk. II
- ADC VLM Mk. II
- ADC XLM Mk. II
- ADC Super XLM Mk. II
Pictures[edit]
- Extract from brochure: P, QLM II, VLM II, XLM II pickups
Reports[edit]
- Report in "FonoForum" 6 / 1975