Difference between revisions of "Kenwood KA-8100"
| (11 intermediate revisions by 7 users not shown) | |||
| Line 1: | Line 1: | ||
| − | == | + | __NOTOC__ |
| − | [[ | + | == Data == |
| + | {{navigation}} | ||
| + | '''General''' | ||
| + | * Manufacturer: [[Kenwood]] | ||
| + | * Model: KA-8100 | ||
| + | * Type: Integrated amplifier | ||
| + | * Years of manufacture: 1977 - 1979 | ||
| + | * Made in: Japan | ||
| + | * Color: Silver | ||
| + | * Remote control: no | ||
| + | * Power consumption: 600 W max. | ||
| + | * Dimensions: 430 x 149 x 384 mm (WxHxD) | ||
| + | * Weight: 16 kg | ||
| + | * Original price approx.: 1298 DM | ||
| + | |||
| + | |||
| + | '''Connections''' | ||
| + | * Number of inputs: 6 | ||
| + | Phono 1 2,5mV/50kOhm/ 85dB 250mV (rms) max. | ||
| + | ** Phono 2 2,5mV/50kOhm/ 85dB | ||
| + | Tuner 150mV/50kOhm/110dB | ||
| + | Aux 150mV/50kOhm/110dB | ||
| + | Tape A/B 150mV/50kOhm/110dB | ||
| + | |||
| + | * Number of outputs: 3 | ||
| + | ** Tape rec. 150mV/220Ohm | ||
| + | ** Headphones (6.3mm jack) | ||
| + | ** 2 pairs of loudspeakers | ||
| + | |||
| + | ** Pre-Out 1,0V/470Ohm | ||
| + | ** Phono RIAA standard +/- 0,2dB | ||
| + | ** Aux/Tape 7 - 50000 Hz +0dB / -1dB | ||
| + | |||
| + | |||
| + | '''Technical Data''' | ||
| + | * Continuous power (at distortion) | ||
| + | ** 8 Ohm: 75W + 75W | ||
| + | 4 Ohm: 90W + 90W | ||
| + | * Dynamic power | ||
| + | ** 4 Ohm: 330W | ||
| + | * Total harmonic distortion: | ||
| + | ** 0.03% at nominal power into 8 Ohm | ||
| + | ** 0.01% at 1W into 4 Ohm | ||
| + | * Attenuation factor: 50 at 8 Ohm | ||
| + | * Frequency response: 5 - 50000 Hz | ||
| + | * Signal to noise ratio: 115dB | ||
| + | * Stereo channel separation: ? | ||
| + | * Tone control(switchable): | ||
| + | ** Bass: yes (150 or 400 Hz switchable) +/- 7.5dB. | ||
| + | treble: yes (3 or 6 kHz switchable) +/- 7,5dB | ||
| + | Loudness: yes (6 levels) | ||
| + | 50Hz: +3dB/+6dB/+9dB | ||
| + | ** 100Hz: +3dB/+6dB/+9dB | ||
| + | * High Filter: yes - 8kHz/12dB/oct. | ||
| + | * Low Filter: yes - 40Hz/12dB/oct. | ||
| + | * Subsonic Filter: yes - 18Hz/6dB/oct. | ||
| + | * Mute: no, but a gain control switch -10dB/ 0 / +10dB | ||
| + | * Direct/Line-Straight: yes - at the turnover switches of the tone controls | ||
| + | |||
| + | |||
| + | '''Special Features''' | ||
| + | * Pre- and power amplifier can be separated via jumper plugs on the rear panel | ||
| + | * Double power supply, separate for both channels | ||
| + | * Current limiting circuit to protect the power amplifier and the speakers in case of overload and short circuit | ||
| + | * DC-coupled power amplifier | ||
| + | |||
| + | |||
| + | == Notes == | ||
| + | * Other models in the same series: | ||
| + | * [[Kenwood KA-3700]] | ||
| + | * [[Kenwood KA-5700]] | ||
| + | * [[Kenwood KA-6100]] | ||
| + | * [[Kenwood KA-6150]] | ||
| + | * [[Kenwood KA-7100]] | ||
| + | * [[Kenwood KA-7150]] | ||
| + | * [[Kenwood KA-8100]] | ||
| + | * [[Kenwood KA-8150]] | ||
| + | * [[Kenwood KA-9100]] | ||
| + | * [[Kenwood KA-9150]] | ||
| + | * [[Kenwood Model 500]] | ||
| + | * [[Kenwood Model 600]] | ||
| + | * [[Kenwood Model 650]] | ||
| + | |||
| + | |||
| + | == Pictures == | ||
| + | * Image: Kenwood KA-8100 | ||
| + | [[File:Ka8100.jpg]] | ||
| + | |||
| + | |||
| + | * Excerpt from brochure: Kenwood KA-8100 | ||
| + | [[File:Kenwood KA-8100-Prospekt-1978.jpg]] | ||
| + | |||
| + | |||
| + | <gallery> | ||
| + | Bild:Kenwood_KA-8100_1.jpg | ||
| + | Bild:Kenwood_KA-8100_2.jpg | ||
| + | Bild:Kenwood_KA-8100_5.jpg | ||
| + | Bild:Kenwood_KA-8100_6.jpg | ||
| + | </gallery> | ||
| + | |||
| + | |||
| + | == Reports == | ||
| + | |||
| + | |||
| + | == Links == | ||
| + | |||
| + | |||
| + | [[Category:Integrated amplifier]] | ||
Latest revision as of 02:48, 13 January 2021
Data[edit]
General
- Manufacturer: Kenwood
- Model: KA-8100
- Type: Integrated amplifier
- Years of manufacture: 1977 - 1979
- Made in: Japan
- Color: Silver
- Remote control: no
- Power consumption: 600 W max.
- Dimensions: 430 x 149 x 384 mm (WxHxD)
- Weight: 16 kg
- Original price approx.: 1298 DM
Connections
- Number of inputs: 6
Phono 1 2,5mV/50kOhm/ 85dB 250mV (rms) max.
- Phono 2 2,5mV/50kOhm/ 85dB
Tuner 150mV/50kOhm/110dB Aux 150mV/50kOhm/110dB Tape A/B 150mV/50kOhm/110dB
- Number of outputs: 3
- Tape rec. 150mV/220Ohm
- Headphones (6.3mm jack)
- 2 pairs of loudspeakers
- Pre-Out 1,0V/470Ohm
- Phono RIAA standard +/- 0,2dB
- Aux/Tape 7 - 50000 Hz +0dB / -1dB
Technical Data
- Continuous power (at distortion)
- 8 Ohm: 75W + 75W
4 Ohm: 90W + 90W
- Dynamic power
- 4 Ohm: 330W
- Total harmonic distortion:
- 0.03% at nominal power into 8 Ohm
- 0.01% at 1W into 4 Ohm
- Attenuation factor: 50 at 8 Ohm
- Frequency response: 5 - 50000 Hz
- Signal to noise ratio: 115dB
- Stereo channel separation: ?
- Tone control(switchable):
- Bass: yes (150 or 400 Hz switchable) +/- 7.5dB.
treble: yes (3 or 6 kHz switchable) +/- 7,5dB Loudness: yes (6 levels) 50Hz: +3dB/+6dB/+9dB
- 100Hz: +3dB/+6dB/+9dB
- High Filter: yes - 8kHz/12dB/oct.
- Low Filter: yes - 40Hz/12dB/oct.
- Subsonic Filter: yes - 18Hz/6dB/oct.
- Mute: no, but a gain control switch -10dB/ 0 / +10dB
- Direct/Line-Straight: yes - at the turnover switches of the tone controls
Special Features
- Pre- and power amplifier can be separated via jumper plugs on the rear panel
- Double power supply, separate for both channels
- Current limiting circuit to protect the power amplifier and the speakers in case of overload and short circuit
- DC-coupled power amplifier
Notes[edit]
- Other models in the same series:
- Kenwood KA-3700
- Kenwood KA-5700
- Kenwood KA-6100
- Kenwood KA-6150
- Kenwood KA-7100
- Kenwood KA-7150
- Kenwood KA-8100
- Kenwood KA-8150
- Kenwood KA-9100
- Kenwood KA-9150
- Kenwood Model 500
- Kenwood Model 600
- Kenwood Model 650
Pictures[edit]
- Image: Kenwood KA-8100
- Excerpt from brochure: Kenwood KA-8100
- Bild:Kenwood KA-8100 1.jpg
- Bild:Kenwood KA-8100 2.jpg
- Bild:Kenwood KA-8100 5.jpg
- Bild:Kenwood KA-8100 6.jpg