Difference between revisions of "Audio Technica AT 100 E"
(Die Seite wurde neu angelegt: „__NOTOC__ == Daten == {{Navigation}} '''Allgemein''' * Hersteller: Audio Technica * Modell: AT 100 E * Baujahre: * Hergestellt in: Japan * Farbe: rot * Gew…“) |
m |
||
| (One intermediate revision by the same user not shown) | |||
| Line 1: | Line 1: | ||
__NOTOC__ | __NOTOC__ | ||
| − | == | + | == Data == |
| − | {{ | + | {{navigation}} |
| − | ''' | + | '''General''' |
| − | * | + | * Manufacturer: [[Audio Technica]] |
| − | * | + | * Model: AT 100 E |
| − | * | + | * Years of manufacture: |
| − | * | + | * Made in: Japan |
| − | * | + | * Color: red |
| − | * | + | * Weight: 6,5 g |
| − | * | + | * Original price: 69,00 € |
| − | ''' | + | '''Technical Data''' |
| − | * | + | * Principle: Moving Magnet (MM) |
| − | * | + | * Output voltage: 4,5 mV / 1 kHz |
| − | * | + | * Channel balance: 1.5 dB / 1 kHz |
| − | * | + | * Frequency range: 20 - 20,000 Hz |
| − | + | * Channel separation: 18 dB / 1 kHz | |
| − | * | + | * Scanning capability: |
| − | * | + | * Tracking force: 10 - 18 mN (1.0 - 1.85 g). |
| − | * | + | * Recommended tracking force: 20 mN (2.0 g) |
| − | * | + | * Needle compliance (static): 35 × 10-6 cm/dyn |
| − | * | + | * Needle compliance (dynamic): 8 × 10-6 cm/dyn / 100 Hz |
| − | * | + | * Needle type: Elliptical |
| − | * | + | * Degree of diamond fillet: |
| − | * | + | * Diamond tip mass: |
| − | * | + | * Vertical scanning angle: 23°. |
| − | * | + | * Forward resistance: |
| − | * | + | * Inductance: 360 mH / 1 kHz |
| − | * | + | * Recommended terminating resistor: 47 kΩ. |
| − | * | + | * Recommended load capacitance per channel: 100-200 pF |
| − | * | ||
| − | == | + | == Remarks == |
| − | + | No longer available! | |
| − | + | Other models in the same series: | |
*[[Audio Technica AT 94 E]] | *[[Audio Technica AT 94 E]] | ||
*[[Audio Technica AT 95 E]] | *[[Audio Technica AT 95 E]] | ||
| − | |||
| − | |||
| − | |||
== Links == | == Links == | ||
| − | * Audio | + | * Audio Creative: [https://www.audio-creativ.de/wordpress/wp-content/uploads/Audio-Technica_Tonabnehmer_2015.pdf Audio Technica pickup 2015], retrieved October 22, 2019 |
| − | * Audio Technica [https://eu.audio-technica.com/AT100E Audio Technica AT100E], | + | * Audio Technica [https://eu.audio-technica.com/AT100E Audio Technica AT100E], retrieved 22 October 2019 |
| − | [[ | + | [[Category:Cartridges]] |
Latest revision as of 12:19, 23 October 2019
Data[edit]
General
- Manufacturer: Audio Technica
- Model: AT 100 E
- Years of manufacture:
- Made in: Japan
- Color: red
- Weight: 6,5 g
- Original price: 69,00 €
Technical Data
- Principle: Moving Magnet (MM)
- Output voltage: 4,5 mV / 1 kHz
- Channel balance: 1.5 dB / 1 kHz
- Frequency range: 20 - 20,000 Hz
- Channel separation: 18 dB / 1 kHz
- Scanning capability:
- Tracking force: 10 - 18 mN (1.0 - 1.85 g).
- Recommended tracking force: 20 mN (2.0 g)
- Needle compliance (static): 35 × 10-6 cm/dyn
- Needle compliance (dynamic): 8 × 10-6 cm/dyn / 100 Hz
- Needle type: Elliptical
- Degree of diamond fillet:
- Diamond tip mass:
- Vertical scanning angle: 23°.
- Forward resistance:
- Inductance: 360 mH / 1 kHz
- Recommended terminating resistor: 47 kΩ.
- Recommended load capacitance per channel: 100-200 pF
Remarks[edit]
No longer available!
Other models in the same series:
Links[edit]
- Audio Creative: Audio Technica pickup 2015, retrieved October 22, 2019
- Audio Technica Audio Technica AT100E, retrieved 22 October 2019