Difference between revisions of "Ortofon VMS 3 E MK II"
(Schreibweise in der Modellbezeichung korrigiert) |
|||
| Line 1: | Line 1: | ||
| + | ==Data== | ||
| + | '''General''' | ||
| + | * Manufacturer: [[Ortofon]] | ||
| + | * Model: VMS 3 E MK II | ||
| + | * Years of manufacture: | ||
| + | * Made in: Denmark | ||
| + | * Color: black | ||
| + | * Weight: 5 g | ||
| + | * Original price approx: | ||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| + | '''Technical data''' | ||
| + | * Principle: Moving Magnet (MM) | ||
| + | * Output voltage: 6 mV / 1.000 Hz | ||
| + | * Channel balance: 2.0 dB / 1kHz | ||
| + | * Crosstalk attenuation: 20 dB / 1kHz | ||
| + | * Frequency range: 20 - 22.000 Hz | ||
| + | * Sensing capability: 50 μm / 315 Hz | ||
| + | * Tracking force: 17 - 23mN (1.7 - 2.3 g) | ||
| + | * Recommended tracking force: 20 mN (2.0 g). | ||
| + | * Needle compliance: lateral 15µm/mN | ||
| + | * Needle type: Elliptical | ||
| + | * Rounding degree of the diamond: 8/18µm | ||
| + | * Mass of the diamond tip: 0.65 mg | ||
| + | * Vertical scan angle: 20 | ||
| + | * Forward resistance: 800 Ohm | ||
| + | * Inductance: 600 mH | ||
| + | * Recommended terminating resistor: 47 kOhm | ||
| + | * Recommended load capacitance per channel: 400 pF | ||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| + | == Remarks == | ||
| + | * Other models in the same series: | ||
| + | ** [[Ortofon VMS 5 E MK II]] | ||
| + | ** [[Ortofon VMS 20 E MK II]] | ||
| − | == | + | == Pictures == |
| − | |||
| − | |||
| − | |||
| − | == | + | == Reports == |
| − | |||
| − | |||
== Links == | == Links == | ||
| Line 46: | Line 45: | ||
| − | [[ | + | [[Category:Pickups]] |
Latest revision as of 10:44, 22 October 2019
Contents
Data
General
- Manufacturer: Ortofon
- Model: VMS 3 E MK II
- Years of manufacture:
- Made in: Denmark
- Color: black
- Weight: 5 g
- Original price approx:
Technical data
- Principle: Moving Magnet (MM)
- Output voltage: 6 mV / 1.000 Hz
- Channel balance: 2.0 dB / 1kHz
- Crosstalk attenuation: 20 dB / 1kHz
- Frequency range: 20 - 22.000 Hz
- Sensing capability: 50 μm / 315 Hz
- Tracking force: 17 - 23mN (1.7 - 2.3 g)
- Recommended tracking force: 20 mN (2.0 g).
- Needle compliance: lateral 15µm/mN
- Needle type: Elliptical
- Rounding degree of the diamond: 8/18µm
- Mass of the diamond tip: 0.65 mg
- Vertical scan angle: 20
- Forward resistance: 800 Ohm
- Inductance: 600 mH
- Recommended terminating resistor: 47 kOhm
- Recommended load capacitance per channel: 400 pF
Remarks
- Other models in the same series: