Difference between revisions of "Elac ESG-796 H 24"
(→Daten) |
|||
| (One intermediate revision by the same user not shown) | |||
| Line 1: | Line 1: | ||
__NOTOC__ | __NOTOC__ | ||
| − | == | + | == Data == |
| − | {{ | + | {{navigation}} |
| − | ''' | + | '''General''' |
| − | * | + | * Manufacturer: [[Elac]] |
| − | * | + | * Model: ESG 796 H 24 |
| − | * | + | * Year of manufacture: ca. 1990 |
| − | * | + | * Manufactured in: West Germany |
| − | * | + | * Colour: |
| − | * | + | * Weight: 6.5 g |
| − | * | + | * Original price approx.: 280 DM |
| − | ''' | + | '''Technical Data''' |
| − | * | + | * Frequency response: 10 - 25,000 Hz |
| − | * | + | * Channel separation: > 28 dB at 1 KHz |
| − | * | + | * Channel balance: < 1 dB |
| − | * | + | * Crosstalk attenuation: |
| − | * | + | * Output voltage: 1.4 mV/cm/s |
| − | * | + | * Terminating resistor: 47 KOhm |
| − | * | + | * Induction: |
| − | * | + | * Needle type: Van den Hul II 5/75 µm. |
| − | * | + | * Recommended contact force: 12.5 - 17.5 mN |
| − | * | + | * Needle compliance: 24 µm/mN static |
| − | ''' | + | '''Special equipment''' |
| − | * | + | * here, if available |
| + | == Remarks == | ||
| + | Other models of the same series: | ||
| − | == | + | == Pictures == |
| − | |||
| − | == | + | == Reports == |
| − | |||
| − | |||
== Links == | == Links == | ||
| − | [[ | + | [[Category:Pickups]] |
Latest revision as of 14:35, 1 May 2010
Data[edit]
General
- Manufacturer: Elac
- Model: ESG 796 H 24
- Year of manufacture: ca. 1990
- Manufactured in: West Germany
- Colour:
- Weight: 6.5 g
- Original price approx.: 280 DM
Technical Data
- Frequency response: 10 - 25,000 Hz
- Channel separation: > 28 dB at 1 KHz
- Channel balance: < 1 dB
- Crosstalk attenuation:
- Output voltage: 1.4 mV/cm/s
- Terminating resistor: 47 KOhm
- Induction:
- Needle type: Van den Hul II 5/75 µm.
- Recommended contact force: 12.5 - 17.5 mN
- Needle compliance: 24 µm/mN static
Special equipment
- here, if available
Remarks[edit]
Other models of the same series: