Difference between revisions of "Sansui 441"
(One intermediate revision by the same user not shown) | |||
Line 1: | Line 1: | ||
__NOTOC__ | __NOTOC__ | ||
− | == | + | == Data == |
− | {{ | + | {{navigation}} |
− | ''' | + | '''General''' |
− | * | + | * Manufacturer: [[Sansui]] |
− | * | + | * Model: 441 |
− | * | + | * Year of manufacture: 1974 - 1976 |
− | * | + | * Made in: Japan |
− | * | + | * Color: Silver, housing wood |
− | * | + | * Remote control: - |
− | * | + | * Power consumption: 90 W max. |
− | * | + | * Dimensions: 424 x 135 x 285 mm |
− | * | + | * Weight: 7.7 kg |
− | * | + | * Original price approx.: 748 DM |
− | ''' | + | '''Connections''' |
− | * | + | * Number of inputs: |
− | ** Phono MM: 2 | + | ** Phono MM: 2.5 mV / 50 kOhm, 90 mV max. |
** AUX: 150 mV / 50 kOhm | ** AUX: 150 mV / 50 kOhm | ||
** Tape Play: 150 mV / 50 kOhm | ** Tape Play: 150 mV / 50 kOhm | ||
− | + | Tape Play DIN: 150 mV / 50 kOhm | |
− | + | Antenna MW | |
− | + | Antenna VHF 300 Ohm Balanced | |
− | ** | + | ** Antenna FM 75 Ohm Unbalanced |
− | * | + | * Number of outputs: |
** Tape Rec: 150 mV | ** Tape Rec: 150 mV | ||
− | + | Tape Rec DIN: 30 mV | |
− | ** | + | ** Headphones (6.3 mm jack, front) |
− | ** 2 | + | ** 2 pairs of loudspeakers |
− | ''' | + | '''Technical Data''' |
− | '' | + | ''Amplifier'' |
− | * | + | * Continuous power |
− | ** 8 Ohm: 2 x | + | ** 8 Ohm: 2 x 11 W (20 Hz - 20 kHz), 2x 12 W (1 kHz) |
** 4 Ohm: | ** 4 Ohm: | ||
− | * | + | * Dynamic power |
− | ** 8 Ohm: | + | ** 8 Ohm: 38 W |
− | ** 4 Ohm: | + | ** 4 Ohm: 44 W |
− | * | + | * Total harmonic distortion: 0.8 |
− | * | + | * Attenuation factor: 20 at 8 Ohm |
− | * | + | * Frequency response: 25 Hz - 30 kHz |
− | * | + | * Signal-to-noise ratio: |
** Phono MM: 70 dB | ** Phono MM: 70 dB | ||
− | + | High level: 80 dB | |
− | * | + | * Tone control: |
− | ** Bass: ± 10 dB | + | ** Bass: ± 10 dB at 50 Hz |
− | + | Treble: ± 10 dB at 10 kHz | |
− | * Loudness: + 10 dB | + | * Loudness: + 10 dB at 100 Hz, + 8 dB at 10 kHz |
− | * High Filter: | + | * High Filter: |
* Low Filter (Subsonic): | * Low Filter (Subsonic): | ||
* Mute: | * Mute: | ||
Line 56: | Line 56: | ||
''Tuner'' | ''Tuner'' | ||
− | * | + | * Reception: FM, MW |
− | * | + | * Frequencies: |
− | ** | + | ** FM: 87.5 - 108 MHz |
− | ** MW: 525 - 1 | + | ** MW: 525 - 1,605 kHz |
− | * | + | * Frequency response: 30 - 15,000 Hz, + 0.5 dB, - 3 dB |
− | * | + | * Input sensitivity: |
− | ** | + | ** FM: 2.5 µV (IHF). |
** MW: | ** MW: | ||
− | * | + | * Distortion factor: |
− | ** | + | ** FM: 0.4% (mono), 0.7% (stereo). |
− | * | + | * Signal-to-noise ratio: |
− | ** | + | ** FM: 65 dB (stereo) |
− | * | + | * Channel separation: |
− | ** | + | ** FM: 40 dB (at 1 kHz). |
− | * | + | * Selectivity: |
− | ** | + | ** FM: 60 dB |
− | * | + | * Equal wave selection: |
− | ** | + | ** FM: 2.5 dB |
− | * | + | * Spurious wave selection: |
− | ** | + | ** FM: 70 dB |
− | * | + | * Image frequency attenuation: |
− | ** | + | ** VHF: 55 dB |
− | * | + | * IF attenuation: |
− | ** | + | ** FM: 75 dB |
− | * AM | + | * AM suppression: 50 dB |
− | ''' | + | '''Special Features''' |
− | * | + | * VHF muting |
− | == | + | == Remarks == |
− | * | + | * Other models in the same series: |
* [[Sansui 221]] | * [[Sansui 221]] | ||
* [[Sansui 331]] | * [[Sansui 331]] | ||
Line 98: | Line 98: | ||
− | == | + | == Pictures == |
− | * | + | * Extract from brochure: Sansui 441 |
[[Datei:Sansui 441-Prospekt-1.jpg]] | [[Datei:Sansui 441-Prospekt-1.jpg]] | ||
− | == | + | == Reports == |
== Links == | == Links == | ||
− | [[ | + | [[Category:Receiver]] |
Latest revision as of 05:35, 21 June 2018
Data[edit]
General
- Manufacturer: Sansui
- Model: 441
- Year of manufacture: 1974 - 1976
- Made in: Japan
- Color: Silver, housing wood
- Remote control: -
- Power consumption: 90 W max.
- Dimensions: 424 x 135 x 285 mm
- Weight: 7.7 kg
- Original price approx.: 748 DM
Connections
- Number of inputs:
- Phono MM: 2.5 mV / 50 kOhm, 90 mV max.
- AUX: 150 mV / 50 kOhm
- Tape Play: 150 mV / 50 kOhm
Tape Play DIN: 150 mV / 50 kOhm Antenna MW Antenna VHF 300 Ohm Balanced
- Antenna FM 75 Ohm Unbalanced
- Number of outputs:
- Tape Rec: 150 mV
Tape Rec DIN: 30 mV
- Headphones (6.3 mm jack, front)
- 2 pairs of loudspeakers
Technical Data
Amplifier
- Continuous power
- 8 Ohm: 2 x 11 W (20 Hz - 20 kHz), 2x 12 W (1 kHz)
- 4 Ohm:
- Dynamic power
- 8 Ohm: 38 W
- 4 Ohm: 44 W
- Total harmonic distortion: 0.8
- Attenuation factor: 20 at 8 Ohm
- Frequency response: 25 Hz - 30 kHz
- Signal-to-noise ratio:
- Phono MM: 70 dB
High level: 80 dB
- Tone control:
- Bass: ± 10 dB at 50 Hz
Treble: ± 10 dB at 10 kHz
- Loudness: + 10 dB at 100 Hz, + 8 dB at 10 kHz
- High Filter:
- Low Filter (Subsonic):
- Mute:
Tuner
- Reception: FM, MW
- Frequencies:
- FM: 87.5 - 108 MHz
- MW: 525 - 1,605 kHz
- Frequency response: 30 - 15,000 Hz, + 0.5 dB, - 3 dB
- Input sensitivity:
- FM: 2.5 µV (IHF).
- MW:
- Distortion factor:
- FM: 0.4% (mono), 0.7% (stereo).
- Signal-to-noise ratio:
- FM: 65 dB (stereo)
- Channel separation:
- FM: 40 dB (at 1 kHz).
- Selectivity:
- FM: 60 dB
- Equal wave selection:
- FM: 2.5 dB
- Spurious wave selection:
- FM: 70 dB
- Image frequency attenuation:
- VHF: 55 dB
- IF attenuation:
- FM: 75 dB
- AM suppression: 50 dB
Special Features
- VHF muting
Remarks[edit]
- Other models in the same series:
- Sansui 221
- Sansui 331
- Sansui 441
- Sansui 551
- Sansui 661
- Sansui 771
- Sansui 881
Pictures[edit]
- Extract from brochure: Sansui 441
Datei:Sansui 441-Prospekt-1.jpg