Difference between revisions of "Akai AM-A 90"
(→Daten) |
|||
| (21 intermediate revisions by 7 users not shown) | |||
| Line 1: | Line 1: | ||
| − | Akai AM-A 90 | + | __NOTOC__ |
| + | ==Data == | ||
| + | '''General ''' | ||
| + | * Manufacturer: [[Akai]] | ||
| + | * Model: AM-A 90 | ||
| + | * Year of manufacture: 1986 | ||
| + | * Made in: Japan | ||
| + | * Color: black/ silver | ||
| + | * Type: analog | ||
| + | * Remote control: no | ||
| + | * Power consumption: 450 W (according to type plate}, 600 W measured at full load | ||
| + | * Dimensions: 440 x 120 x 410 mm (WxHxD) | ||
| + | * Weight: 12,5 kg | ||
| + | * Original price approx.: 1000 DM | ||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | + | '''Connections ''' | |
| − | + | * Inputs: | |
| − | + | ** Phono MC/MM switchable : (Cinch) | |
| − | + | Tuner: (Cinch) | |
| − | + | CD/AUX: (Cinch) | |
| − | + | ** Tape1: (Cinch) | |
| − | + | ** Tape2: (Cinch) | |
| − | + | ** Video (sound): (Cinch) | |
| − | + | ** V-Disk (sound) | |
| − | + | * Number of outputs: | |
| − | + | ** Tape1 REC: (Cinch) | |
| − | + | ** Tape2 REC: (Cinch) | |
| + | ** 2 pairs of speakers (screw terminals) | ||
| − | + | '''Technical Data ''' | |
| − | + | * Continuous power FTC at distortion factor (standard) | |
| − | + | 8 Ohm: 2x 130 W (0,05%, 20-20.000 Hz ( rms ) | |
| − | + | 4 Ohm: 2x 180 W (0.07%, 20-20,000 Hz ( rms ) | |
| − | + | ** 8 Ohm: 2x 140 W (0,07% 1kHz ( DIN ) | |
| − | + | ** 4 Ohm: 2x 190 W (0,07% 1kHz ( DIN ) | |
| − | + | * Dynamic power: | |
| − | + | ** 8 Ohm: 2x 190 W | |
| − | + | 4 Ohm: 2x 260 W | |
| − | + | * Total harmonic distortion: 0.07 % (1khz, 8 Ohm) | |
| − | + | * Attenuation factor: 30 (1 kHz, 8 Ohm) | |
| − | + | * Frequency response: 10 - 80,000 Hz (+0dB, -3dB) | |
| − | + | * Signal-to-noise ratio: | |
| − | + | ** Phono MM: 86 db | |
| − | + | Phono MC: 67 db | |
| − | + | CD/ Aux: 100 db | |
| − | + | * Channel separation: 60 db | |
| − | + | * Tone control: | |
| − | + | * Bass: yes (±8 db at 100 Hz). | |
| − | + | * Treble: yes (±8 db at 10 khz) | |
| − | + | * Loudness: yes | |
| − | + | * Subsonic (rumble filter): yes | |
| + | * Treble filter: no | ||
| + | * Mute: yes (-20 dB) | ||
| + | * Direct/Line-Straight: yes | ||
| − | + | ||
| − | + | '''Special Features''' | |
| − | + | * Toroidal toroidal transformer, encapsulated. | |
| − | + | * Electronic overload protection and switch-on delay via relay. | |
| − | + | * 4 loudspeakers connectable to terminals and switchable in pairs. | |
| − | + | * Switch for stereo/ mono/ signal right/ signal left. | |
| − | + | * Tape to tape dubbing function. | |
| − | + | Phono input gold-plated and MC-suitable (switchable). | |
| − | + | Tone control network can be switched off. | |
| − | + | Caution: Amplifier is impedance-critical, with impedances under 4 ohms danger of output stage failures! | |
| − | + | ||
| + | == Remarks == | ||
| + | Other models of the same series:10375-25135 | ||
| + | * [[Akai AM-A 70|AM-A70]] | ||
| + | * [[Akai AM-A 90|AM-A90]] | ||
| + | |||
| + | == Pictures == | ||
| + | http://img25.imageshack.us/img25/1838/ama90.jpg | ||
| + | |||
| + | == Reports == | ||
| + | |||
| + | |||
| + | == Links == | ||
| + | |||
| + | [[Category:Integrated amplifier]] | ||
Latest revision as of 16:33, 20 July 2011
Data[edit]
General
- Manufacturer: Akai
- Model: AM-A 90
- Year of manufacture: 1986
- Made in: Japan
- Color: black/ silver
- Type: analog
- Remote control: no
- Power consumption: 450 W (according to type plate}, 600 W measured at full load
- Dimensions: 440 x 120 x 410 mm (WxHxD)
- Weight: 12,5 kg
- Original price approx.: 1000 DM
Connections
- Inputs:
- Phono MC/MM switchable : (Cinch)
Tuner: (Cinch) CD/AUX: (Cinch)
- Tape1: (Cinch)
- Tape2: (Cinch)
- Video (sound): (Cinch)
- V-Disk (sound)
- Number of outputs:
- Tape1 REC: (Cinch)
- Tape2 REC: (Cinch)
- 2 pairs of speakers (screw terminals)
Technical Data
- Continuous power FTC at distortion factor (standard)
8 Ohm: 2x 130 W (0,05%, 20-20.000 Hz ( rms ) 4 Ohm: 2x 180 W (0.07%, 20-20,000 Hz ( rms )
- 8 Ohm: 2x 140 W (0,07% 1kHz ( DIN )
- 4 Ohm: 2x 190 W (0,07% 1kHz ( DIN )
- Dynamic power:
- 8 Ohm: 2x 190 W
4 Ohm: 2x 260 W
- Total harmonic distortion: 0.07 % (1khz, 8 Ohm)
- Attenuation factor: 30 (1 kHz, 8 Ohm)
- Frequency response: 10 - 80,000 Hz (+0dB, -3dB)
- Signal-to-noise ratio:
- Phono MM: 86 db
Phono MC: 67 db CD/ Aux: 100 db
- Channel separation: 60 db
- Tone control:
- Bass: yes (±8 db at 100 Hz).
- Treble: yes (±8 db at 10 khz)
- Loudness: yes
- Subsonic (rumble filter): yes
- Treble filter: no
- Mute: yes (-20 dB)
- Direct/Line-Straight: yes
Special Features
- Toroidal toroidal transformer, encapsulated.
- Electronic overload protection and switch-on delay via relay.
- 4 loudspeakers connectable to terminals and switchable in pairs.
- Switch for stereo/ mono/ signal right/ signal left.
- Tape to tape dubbing function.
Phono input gold-plated and MC-suitable (switchable). Tone control network can be switched off. Caution: Amplifier is impedance-critical, with impedances under 4 ohms danger of output stage failures!
Remarks[edit]
Other models of the same series:10375-25135
Pictures[edit]
