Difference between revisions of "Sansui 5000"
(→Daten) |
|||
(13 intermediate revisions by 2 users not shown) | |||
Line 1: | Line 1: | ||
__NOTOC__ | __NOTOC__ | ||
− | == | + | == Data == |
− | {{ | + | {{navigation}} |
− | ''' | + | '''General''' |
− | * | + | * Manufacturer: [[Sansui]] |
− | * | + | * Model: 5000 |
− | * | + | * Type: Receiver |
− | * | + | * Years of manufacture: 1967 - 1969 |
− | * | + | * Made in: Japan |
− | * | + | * Color: silver, metal housing black |
− | * | + | * Remote control: no |
− | * | + | * Power consumption: |
− | * | + | * Dimensions: 462 x 162 x 338 mm (WxHxD). |
− | * | + | * Weight: 15.1 kg |
− | * | + | * Original price approx.: 2'125 DM |
+ | * Surcharge wooden case walnut: 115 DM | ||
+ | * Surcharge wooden cabinet sanding varnish white: 125 DM | ||
− | ''' | + | '''Connections''' |
− | * | + | * Number of inputs: |
− | ** Phono (MM): 2 | + | ** Phono (MM): 2.5 mV / 50 kOhm |
− | + | 2x Tape, Aux: 150 mV / 50 kOhm | |
− | ** | + | ** Antenna (FM: 75, 300 Ohm, AM). |
− | * | + | * Number of outputs: |
** 2x Tape Rec: 200 mV | ** 2x Tape Rec: 200 mV | ||
− | + | Tape Rec DIN: 35 mV | |
− | ** | + | ** Headphones (6,3mm jack) |
− | ** 3 | + | ** 3 pairs of loudspeakers |
− | ''' | + | '''Technical Data''' |
− | '' | + | ''Amplifier'' |
− | * | + | * Continuous power (at distortion): |
− | ** 8 Ohm: | + | ** 8 Ohm: 2x 55 W |
− | + | 4 Ohm: 2x 70 W | |
− | * | + | * Dynamic power: |
** 8 Ohm: | ** 8 Ohm: | ||
** 4 Ohm: 180 W | ** 4 Ohm: 180 W | ||
− | * | + | * Total harmonic distortion: < 0.8 |
− | * | + | * Attenuation factor: 50 (at 8 Ohm) |
− | * | + | * Frequency response: |
− | ** Phono: 30 - 15 | + | ** Phono: 30 - 15,000 Hz, ± 0.2 dB. |
− | ** High Level: 15 - 30 | + | ** High Level: 15 - 30,000 Hz (+0 dB, -1 dB) |
− | + | Signal-to-noise ratio: | |
** Phono: 70 dB | ** Phono: 70 dB | ||
− | + | High Level: 75 dB | |
− | * | + | * Tone control: |
− | ** Bass | + | ** Bass at 100 Hz: ± 10 dB |
− | + | Treble at 10 kHz: ± 10 dB | |
− | * Loudness: | + | * Loudness: yes, +6 dB at 100 Hz, +3 dB at 10 kHz |
− | * Low Filter: | + | * Low Filter: yes, 6 dB / octave at 30 Hz |
− | * High Filter: | + | * High Filter: yes, 6 dB / octave at 8 kHz |
* Mute: | * Mute: | ||
''Tuner'' | ''Tuner'' | ||
− | * | + | * Reception: FM/MW |
− | * | + | * Frequencies: |
− | ** | + | ** FM: 88 - 108 MHz |
** MW: 535 - 1605 KHz | ** MW: 535 - 1605 KHz | ||
− | * | + | * Input sensitivity: |
− | ** | + | ** FM: 1.8µV |
** MW: 15µV | ** MW: 15µV | ||
− | * | + | * Frequency response: 30 - 15,000 Hz (+0.2/-0.5 dB) |
− | * | + | * Distortion factor: |
− | ** | + | ** FM (1 kHz): < 0.10% (mono), < 0.15% (stereo). |
− | * | + | * Signal-to-noise ratio: |
− | ** | + | ** FM (65 dBf): 75 dB (mono), 66 dB (stereo). |
** MW: 55 dB | ** MW: 55 dB | ||
− | * | + | * Channel separation: 45 dB (1 kHz) |
− | * | + | * selectivity: |
− | * | + | * Co-wave selection: 1.0 dB |
− | * | + | * Spurious wave selection: |
− | ** | + | ** FM: 80 dB |
− | * | + | * Mirror frequency attenuation: |
− | ** | + | ** FM: 90 dB |
+ | MW: 40 dB | ||
+ | IF attenuation: | ||
+ | ** FM: 110 dB | ||
** MW: 40 dB | ** MW: 40 dB | ||
− | + | * AM suppression: 55 dB | |
− | + | ||
− | |||
− | * AM | ||
+ | '''Special Features''' | ||
+ | * Front connections for tape deck | ||
+ | ** Total connections for 4 tape decks | ||
+ | * 3 pairs of speakers | ||
− | + | == Remarks == | |
− | * | + | * Other models in the same series: |
− | ** | + | * [[Sansui 200]] |
− | * | + | * [[Sansui 210]] |
+ | * [[Sansui 220]] | ||
+ | * [[Sansui 250]] | ||
+ | * [[Sansui 300]] | ||
+ | * [[Sansui 350]] | ||
+ | * [[Sansui 350 A]] | ||
+ | * [[Sansui 800]] | ||
+ | * [[Sansui 1000]] Original model | ||
+ | * [[Sansui 1000 A]] More power | ||
+ | * [[Sansui 1000 X]] More power | ||
+ | * [[Sansui 2000]] Original model | ||
+ | * [[Sansui 2000 A]] More power | ||
+ | * [[Sansui 2000 X]] More power | ||
+ | * [[Sansui 3000]] Original model | ||
+ | * [[Sansui 3000 A]] More power | ||
+ | * [[Sansui 4000]] | ||
+ | * [[Sansui 5000]] Original model | ||
+ | * [[Sansui 5000 A]] More power | ||
+ | * [[Sansui 5000 X]] More power | ||
− | == | + | == Pictures == |
− | * | + | * Image: Sansui 5000 |
− | + | [[File:Sansui 5000-Prospekt-1.jpg]] | |
− | |||
− | |||
− | + | * Excerpt from brochure: Sansui 5000 | |
− | * | + | [[File:Sansui 5000-Prospekt-2.jpg]] |
− | [[ | ||
− | == | + | == Reports == |
− | * | + | * Report from "Good Old Hifi": [[http://www.good-old-hifi.de/sansui_5000/]] |
Line 107: | Line 129: | ||
− | [[ | + | [[Category:Receiver]] |
Latest revision as of 08:26, 27 January 2021
Data[edit]
General
- Manufacturer: Sansui
- Model: 5000
- Type: Receiver
- Years of manufacture: 1967 - 1969
- Made in: Japan
- Color: silver, metal housing black
- Remote control: no
- Power consumption:
- Dimensions: 462 x 162 x 338 mm (WxHxD).
- Weight: 15.1 kg
- Original price approx.: 2'125 DM
- Surcharge wooden case walnut: 115 DM
- Surcharge wooden cabinet sanding varnish white: 125 DM
Connections
- Number of inputs:
- Phono (MM): 2.5 mV / 50 kOhm
2x Tape, Aux: 150 mV / 50 kOhm
- Antenna (FM: 75, 300 Ohm, AM).
- Number of outputs:
- 2x Tape Rec: 200 mV
Tape Rec DIN: 35 mV
- Headphones (6,3mm jack)
- 3 pairs of loudspeakers
Technical Data
Amplifier
- Continuous power (at distortion):
- 8 Ohm: 2x 55 W
4 Ohm: 2x 70 W
- Dynamic power:
- 8 Ohm:
- 4 Ohm: 180 W
- Total harmonic distortion: < 0.8
- Attenuation factor: 50 (at 8 Ohm)
- Frequency response:
- Phono: 30 - 15,000 Hz, ± 0.2 dB.
- High Level: 15 - 30,000 Hz (+0 dB, -1 dB)
Signal-to-noise ratio:
- Phono: 70 dB
High Level: 75 dB
- Tone control:
- Bass at 100 Hz: ± 10 dB
Treble at 10 kHz: ± 10 dB
- Loudness: yes, +6 dB at 100 Hz, +3 dB at 10 kHz
- Low Filter: yes, 6 dB / octave at 30 Hz
- High Filter: yes, 6 dB / octave at 8 kHz
- Mute:
Tuner
- Reception: FM/MW
- Frequencies:
- FM: 88 - 108 MHz
- MW: 535 - 1605 KHz
- Input sensitivity:
- FM: 1.8µV
- MW: 15µV
- Frequency response: 30 - 15,000 Hz (+0.2/-0.5 dB)
- Distortion factor:
- FM (1 kHz): < 0.10% (mono), < 0.15% (stereo).
- Signal-to-noise ratio:
- FM (65 dBf): 75 dB (mono), 66 dB (stereo).
- MW: 55 dB
- Channel separation: 45 dB (1 kHz)
- selectivity:
- Co-wave selection: 1.0 dB
- Spurious wave selection:
- FM: 80 dB
- Mirror frequency attenuation:
- FM: 90 dB
MW: 40 dB IF attenuation:
- FM: 110 dB
- MW: 40 dB
- AM suppression: 55 dB
Special Features
- Front connections for tape deck
- Total connections for 4 tape decks
- 3 pairs of speakers
Remarks[edit]
- Other models in the same series:
- Sansui 200
- Sansui 210
- Sansui 220
- Sansui 250
- Sansui 300
- Sansui 350
- Sansui 350 A
- Sansui 800
- Sansui 1000 Original model
- Sansui 1000 A More power
- Sansui 1000 X More power
- Sansui 2000 Original model
- Sansui 2000 A More power
- Sansui 2000 X More power
- Sansui 3000 Original model
- Sansui 3000 A More power
- Sansui 4000
- Sansui 5000 Original model
- Sansui 5000 A More power
- Sansui 5000 X More power
Pictures[edit]
- Image: Sansui 5000
- Excerpt from brochure: Sansui 5000
Reports[edit]
- Report from "Good Old Hifi": [[1]]