Difference between revisions of "Setton RS-220"
(37 intermediate revisions by 2 users not shown) | |||
Line 1: | Line 1: | ||
__NOTOC__ | __NOTOC__ | ||
− | == | + | == Data == |
− | {{ | + | {{navigation}} |
− | ''' | + | '''General''' |
− | * | + | * Manufacturer: [[Setton]] |
− | * | + | * Model: RS-220 |
− | * | + | * Type: Receiver |
− | * | + | * Years of manufacture: 1977 - 1981 |
− | * | + | * Made in: Japan |
− | * | + | * Color: Front silver, housing wood foil |
− | * | + | * Power consumption: 330 W max. |
− | * | + | * Dimensions: 540 x 170 x 300 mm (WxHxD) |
− | * | + | * Weight: approx. 12.8 kg |
+ | * Original price approx.: 1'498 DM | ||
− | ''' | + | '''Connections''' |
− | * | + | * Number of inputs: |
− | ** Phono (MM): 2,5 mV | + | ** Phono (MM) switchable High: 2.5 mV, max. 150 mV, Low: 5 mV, max. 300 mV. |
− | + | Aux: 150 mV | |
− | ** | + | Tape Play 1, 2: 150 mV |
− | * | + | Tape 2 DIN: 150 mV |
− | ** | + | ** Antenna (FM: 75, 300 Ohm, AM) |
− | ** | + | * Number of outputs: |
− | ** 2 | + | ** Tape Rec 1, 2: 150 mV |
+ | Tape 2 DIN: 30 mV | ||
+ | ** Headphones: 6.3mm jack plug | ||
+ | ** 2 pairs of loudspeakers | ||
− | ''' | + | '''Technical Data''' |
− | '' | + | ''Amplifier'' |
− | * | + | * Continuous power (at distortion): |
− | ** 8 Ohm: 2x | + | ** 8 Ohm: 2x 40 W (RMS, 20 - 20,000 Hz), 2x 45 W (1 kHz). |
− | ** 4 Ohm: 2x 60 W | + | ** 4 Ohm: 2x 60 W (1 kHz) |
− | * | + | * Dynamic power: |
** 8 Ohm: | ** 8 Ohm: | ||
** 4 Ohm: | ** 4 Ohm: | ||
− | * | + | * Total harmonic distortion: 0.1%, 0.05% at 1000 Hz |
− | * | + | * Damping factor: 30 at (1 kHz, 8 Ohm) |
− | * | + | * Frequency response: 20 - 20,000 Hz |
− | * | + | * Power bandwidth: 10 - 35,000 Hz |
− | * | + | * Signal-to-noise ratio: |
− | * | + | ** Phono Low: 70 dB |
− | ** Bass: | + | Phono High: 65 dB |
− | ** | + | ** AUX: 85 dB |
− | * Loudness: | + | Tape: 85 dB |
− | * High Filter: | + | * Stereo Channel Separation: |
− | * Low Filter (Subsonic): | + | * Tone control: |
− | + | ** Bass: ± 12 dB, 50 Hz | |
− | + | ** Mids: ± 6 dB, 1 kHz | |
+ | ** Treble: ± 10 dB, 10 kHz | ||
+ | * Loudness: + 12 dB at 50 Hz, + 3.5 dB at 10 kHz | ||
+ | * High Filter: - 10 dB at 10 kHz | ||
+ | * Low Filter (Subsonic): | ||
− | ''Tuner'' | + | '''Tuner:''' |
− | * | + | * Reception: FM, AM |
− | * | + | * Frequencies: |
− | ** | + | ** FM: 88 - 108 MHz |
− | ** MW: | + | ** MW: 525 - 1605 kHz |
− | * | + | * Input sensitivity: |
− | * | + | ** FM: 2.0 µV |
− | ** | + | ** MW: 25 µV |
− | * | + | * Frequency response: 30 - 15'000 Hz |
− | ** | + | * Distortion factor: Stereo 0.4 %, Mono 0.15 % at 1 kHz |
− | * | + | * Signal-to-noise ratio: |
− | * | + | ** FM: 70 dB |
− | * | + | AM: 45 dB |
− | * | + | * Stereo channel separation: > 40 dB at 1 kHz |
− | * | + | * Selectivity: |
− | * | + | ** FM: 70 dB |
− | * | + | ** AM: 45 dB |
− | * | + | * Co-wave selection: 1.25 dB |
− | * | + | * Spurious wave selection: 70 dB |
− | * | + | * Image frequency attenuation: |
− | * | + | ** FM: 55 dB |
+ | ** MW: 40 dB | ||
+ | IF attenuation: | ||
+ | ** FM: > 80 dB | ||
+ | ** MW: > 85 dB | ||
+ | * AM suppression: 65 dB | ||
+ | * FM muting | ||
+ | * MPX filter | ||
− | ''' | + | '''Special Features''' |
+ | * 3-fold overload indicator, electronic protection circuitry | ||
+ | * Ceramic filters | ||
+ | * Mono / Stereo switch | ||
− | == | + | == Remarks == |
− | * | + | * Other models in the same series: |
− | * | + | * Integrated amplifier: |
− | + | * [[Setton AS-1100]] | |
− | + | * [[Setton AS-3300]] | |
− | * | + | * Preamplifiers: |
− | + | * [[Setton PS-5500]] | |
− | + | * Power amplifier: | |
+ | * [[Setton BS-5500]] | ||
− | == | + | * Tuner: |
− | * | + | * [[Setton TUS-600]] |
+ | |||
+ | |||
+ | * Receiver: | ||
+ | * [[Setton RS-220]] | ||
+ | * [[Setton RS-440]] | ||
+ | * [[Setton RS-660]] | ||
+ | |||
+ | |||
+ | * [[Record Player]] | ||
+ | * [[Setton TS-11]] | ||
+ | |||
+ | |||
+ | * Setton Hifi Center RCS.X.1000: | ||
+ | * [[Setton RCS.X.1000]] | ||
+ | |||
+ | |||
+ | * Speakers: | ||
+ | * [[Setton M-10]] | ||
+ | * [[Setton M-10 A]] | ||
+ | * [[Setton M-20]] | ||
+ | * [[Setton M-20 A]] | ||
+ | * [[Setton M-30]] | ||
+ | * [[Setton M-30 A]] | ||
+ | |||
+ | |||
+ | == Pictures == | ||
+ | * Image: Setton RS-220 | ||
+ | [[File:Setton RS-220-1.jpg]] | ||
+ | |||
+ | |||
+ | * Picture: Setton RS-220 overload indicator 3-fold | ||
+ | [[File:Setton RS-220-5.jpg]] | ||
+ | |||
+ | |||
+ | == Reports == | ||
+ | * Review of the RS-220 by "Hifi Studio": [https://web.archive.org/web/20120513214147/http://www.hifi-studio.de/hifi-klassiker/Setton/Setton_RS220/RS220.htm] | ||
Line 97: | Line 152: | ||
− | [[ | + | [[Category:Receiver]] |
Latest revision as of 03:57, 30 September 2019
Data[edit]
General
- Manufacturer: Setton
- Model: RS-220
- Type: Receiver
- Years of manufacture: 1977 - 1981
- Made in: Japan
- Color: Front silver, housing wood foil
- Power consumption: 330 W max.
- Dimensions: 540 x 170 x 300 mm (WxHxD)
- Weight: approx. 12.8 kg
- Original price approx.: 1'498 DM
Connections
- Number of inputs:
- Phono (MM) switchable High: 2.5 mV, max. 150 mV, Low: 5 mV, max. 300 mV.
Aux: 150 mV Tape Play 1, 2: 150 mV Tape 2 DIN: 150 mV
- Antenna (FM: 75, 300 Ohm, AM)
- Number of outputs:
- Tape Rec 1, 2: 150 mV
Tape 2 DIN: 30 mV
- Headphones: 6.3mm jack plug
- 2 pairs of loudspeakers
Technical Data
Amplifier
- Continuous power (at distortion):
- 8 Ohm: 2x 40 W (RMS, 20 - 20,000 Hz), 2x 45 W (1 kHz).
- 4 Ohm: 2x 60 W (1 kHz)
- Dynamic power:
- 8 Ohm:
- 4 Ohm:
- Total harmonic distortion: 0.1%, 0.05% at 1000 Hz
- Damping factor: 30 at (1 kHz, 8 Ohm)
- Frequency response: 20 - 20,000 Hz
- Power bandwidth: 10 - 35,000 Hz
- Signal-to-noise ratio:
- Phono Low: 70 dB
Phono High: 65 dB
- AUX: 85 dB
Tape: 85 dB
- Stereo Channel Separation:
- Tone control:
- Bass: ± 12 dB, 50 Hz
- Mids: ± 6 dB, 1 kHz
- Treble: ± 10 dB, 10 kHz
- Loudness: + 12 dB at 50 Hz, + 3.5 dB at 10 kHz
- High Filter: - 10 dB at 10 kHz
- Low Filter (Subsonic):
Tuner:
- Reception: FM, AM
- Frequencies:
- FM: 88 - 108 MHz
- MW: 525 - 1605 kHz
- Input sensitivity:
- FM: 2.0 µV
- MW: 25 µV
- Frequency response: 30 - 15'000 Hz
- Distortion factor: Stereo 0.4 %, Mono 0.15 % at 1 kHz
- Signal-to-noise ratio:
- FM: 70 dB
AM: 45 dB
- Stereo channel separation: > 40 dB at 1 kHz
- Selectivity:
- FM: 70 dB
- AM: 45 dB
- Co-wave selection: 1.25 dB
- Spurious wave selection: 70 dB
- Image frequency attenuation:
- FM: 55 dB
- MW: 40 dB
IF attenuation:
- FM: > 80 dB
- MW: > 85 dB
- AM suppression: 65 dB
- FM muting
- MPX filter
Special Features
- 3-fold overload indicator, electronic protection circuitry
- Ceramic filters
- Mono / Stereo switch
Remarks[edit]
- Other models in the same series:
- Integrated amplifier:
- Setton AS-1100
- Setton AS-3300
- Preamplifiers:
- Setton PS-5500
- Power amplifier:
- Setton BS-5500
- Tuner:
- Setton TUS-600
- Receiver:
- Setton RS-220
- Setton RS-440
- Setton RS-660
- Setton Hifi Center RCS.X.1000:
- Setton RCS.X.1000
Pictures[edit]
- Image: Setton RS-220
- Picture: Setton RS-220 overload indicator 3-fold
Reports[edit]
- Review of the RS-220 by "Hifi Studio": [1]