Difference between revisions of "Kenwood KR-3600"
(4 intermediate revisions by the same user not shown) | |||
Line 1: | Line 1: | ||
__NOTOC__ | __NOTOC__ | ||
− | == | + | == Data == |
− | {{ | + | {{navigation}} |
− | ''' | + | '''General''' |
− | * | + | * Manufacturer: [[Kenwood]] |
− | * | + | * Model: KR-3600 |
− | * | + | * Year of manufacture: 1976 - 1978 |
− | * | + | * Made in: Japan |
− | * | + | * Color: silver |
− | * | + | * Remote control: no |
− | * | + | * Power consumption: 110 W |
− | * | + | * Dimensions: 438 x 135 x 300 mm (WxHxD). |
− | * | + | * Weight: |
− | * | + | * Original price approx.: 250 US-$, 1'100 DM |
− | ''' | + | '''Connections''' |
− | * | + | * Number of inputs: |
− | ** Phono MM (Cinch): 2 | + | ** Phono MM (Cinch): 2.5 mV / 50 kOhm |
− | + | Tape In (Cinch/DIN): 150 mV / 50 kOhm | |
** AUX (Cinch): 150 mV / 80 kOhm | ** AUX (Cinch): 150 mV / 80 kOhm | ||
− | ** | + | ** Antenna FM (75/300 Ohm), AM |
− | * | + | * Number of outputs: |
− | ** Tape Out (Cinch/DIN): 150 mV / 100 Ohm (Cinch); 30 mV / 80 kOhm (DIN) | + | ** Tape Out (Cinch/DIN): 150 mV / 100 Ohm (Cinch); 30 mV / 80 kOhm (DIN). |
− | ** | + | ** Headphones (6.3 mm jack, front) |
− | ** 2 | + | ** 2 pairs of loudspeakers |
− | ''' | + | '''Technical Data''' |
− | '' | + | ''Amplifier'' |
− | * | + | * Continuous power |
− | ** 8 Ohm: 2x 22 W (20-20 | + | ** 8 Ohm: 2x 22 W (20-20,000 Hz) |
** 4 Ohm: | ** 4 Ohm: | ||
− | * | + | * Dynamic power |
** 8 Ohm: | ** 8 Ohm: | ||
** 4 Ohm: | ** 4 Ohm: | ||
− | * | + | * Total harmonic distortion: 0.8% (at nominal power) |
− | * | + | * Attenuation factor: 30 (8 Ohm) |
− | * | + | * Frequency response: |
− | ** | + | ** Preamplifier: 10 - 50,000 Hz |
− | ** | + | ** Power bandwidth: 10 - 45,000 Hz |
− | * | + | * Signal-to-noise ratio: |
** Phono MM: 70 dB | ** Phono MM: 70 dB | ||
** AUX, Tape: 90 dB | ** AUX, Tape: 90 dB | ||
− | * | + | * Stereo channel separation: |
− | * | + | * Tone control: |
− | ** Bass: ±8 dB | + | ** Bass: ±8 dB at 100 Hz |
− | + | Treble: ±8 dB at 10 kHz | |
* Loudness: +8/+5 dB (100 Hz/10 kHz) | * Loudness: +8/+5 dB (100 Hz/10 kHz) | ||
− | * High Filter: -10 dB | + | * High Filter: -10 dB at 10 kHz |
− | * Low Filter (Subsonic): | + | * Low Filter (Subsonic): no |
− | * Mute: FM | + | * Mute: FM muting |
− | |||
''Tuner'' | ''Tuner'' | ||
− | * | + | * Reception: FM, MW |
− | * | + | * Frequencies: |
− | ** | + | ** FM: 87.5 - 108 MHz |
− | + | MW: 525 - 1605 kHz | |
− | * | + | LW: 150 - 350 kHz |
− | * | + | * Frequency response: 20 - 15,000 Hz (+0/-1.5 dB, FM) |
− | ** | + | * Input sensitivity: |
− | + | ** FM: 2.3 µV (IHF) | |
− | + | MW: 25 µV | |
− | ** | + | LW: 20µV |
− | * | + | Distortion factor: |
− | * | + | ** FM: 0.3% (mono), 0.5% (stereo). |
− | ** | + | * Signal-to-noise ratio: |
− | * | + | * Channel separation: |
− | + | ** FM: 40 dB (at 1 kHz) | |
− | * | + | * Separation: (IHF) |
− | ** | + | FM: 60 dB |
− | * | + | * Equal wave selection: |
− | * | + | ** FM: 2.0 dB |
− | * | + | * Spurious wave selection: |
− | * AM | + | * IF attenuation: |
− | + | * IF attenuation: | |
− | + | * AM suppression: | |
− | |||
− | ''' | + | '''Special Features''' |
− | * | + | * As '''KR-3600 L''' additionally built with long wave tuner. |
− | == | + | == Remarks == |
− | * | + | * Other models of the same series: |
− | ** [[Kenwood | + | ** [[Kenwood KR-2600]] |
− | ** [[Kenwood | + | ** [[Kenwood KR-3600]] |
− | ** [[Kenwood | + | ** [[Kenwood KR-4600]] |
− | ** [[Kenwood | + | ** [[Kenwood KR-5600]] |
− | ** [[Kenwood | + | ** [[Kenwood KR-6600]] |
− | ** [[Kenwood | + | ** [[Kenwood KR-7600]] |
− | ** [[Kenwood | + | ** [[Kenwood KR-9600]] |
− | == | + | == Pictures == |
− | * | + | * Image: Kenwood KR-3600 L |
− | [[ | + | [[File:Kenwood KR-3600-1.jpg]] |
− | == | + | == Reports == |
== Links == | == Links == | ||
− | [[ | + | [[Category:Receiver]] |
Latest revision as of 06:47, 29 April 2019
Data[edit]
General
- Manufacturer: Kenwood
- Model: KR-3600
- Year of manufacture: 1976 - 1978
- Made in: Japan
- Color: silver
- Remote control: no
- Power consumption: 110 W
- Dimensions: 438 x 135 x 300 mm (WxHxD).
- Weight:
- Original price approx.: 250 US-$, 1'100 DM
Connections
- Number of inputs:
- Phono MM (Cinch): 2.5 mV / 50 kOhm
Tape In (Cinch/DIN): 150 mV / 50 kOhm
- AUX (Cinch): 150 mV / 80 kOhm
- Antenna FM (75/300 Ohm), AM
- Number of outputs:
- Tape Out (Cinch/DIN): 150 mV / 100 Ohm (Cinch); 30 mV / 80 kOhm (DIN).
- Headphones (6.3 mm jack, front)
- 2 pairs of loudspeakers
Technical Data
Amplifier
- Continuous power
- 8 Ohm: 2x 22 W (20-20,000 Hz)
- 4 Ohm:
- Dynamic power
- 8 Ohm:
- 4 Ohm:
- Total harmonic distortion: 0.8% (at nominal power)
- Attenuation factor: 30 (8 Ohm)
- Frequency response:
- Preamplifier: 10 - 50,000 Hz
- Power bandwidth: 10 - 45,000 Hz
- Signal-to-noise ratio:
- Phono MM: 70 dB
- AUX, Tape: 90 dB
- Stereo channel separation:
- Tone control:
- Bass: ±8 dB at 100 Hz
Treble: ±8 dB at 10 kHz
- Loudness: +8/+5 dB (100 Hz/10 kHz)
- High Filter: -10 dB at 10 kHz
- Low Filter (Subsonic): no
- Mute: FM muting
Tuner
- Reception: FM, MW
- Frequencies:
- FM: 87.5 - 108 MHz
MW: 525 - 1605 kHz LW: 150 - 350 kHz
- Frequency response: 20 - 15,000 Hz (+0/-1.5 dB, FM)
- Input sensitivity:
- FM: 2.3 µV (IHF)
MW: 25 µV LW: 20µV Distortion factor:
- FM: 0.3% (mono), 0.5% (stereo).
- Signal-to-noise ratio:
- Channel separation:
- FM: 40 dB (at 1 kHz)
- Separation: (IHF)
FM: 60 dB
- Equal wave selection:
- FM: 2.0 dB
- Spurious wave selection:
- IF attenuation:
- IF attenuation:
- AM suppression:
Special Features
- As KR-3600 L additionally built with long wave tuner.
Remarks[edit]
- Other models of the same series:
Pictures[edit]
- Image: Kenwood KR-3600 L